Spear & Jackson Q1W-SP09-1450 Quick Start Manual

IN THE BOX

1

6

7

8

9

10

11

12

2

3

4

5

High pressure washer
Cable storage
Patio cleaner
Extend lance for patio cleaner

Adjustable spray lance

High pressure hose

Spray gun

Detergent bottle
Water inlet male connector
Nozzle pin
Instruction manual

1

8

2

9

3

10

4

11

12

5

6

7

LACK OF PRESSURE?

REMOVE POSSIBLE AIRLOCKS! RECONNECT

WATER HOSE FOLLOWING INSTRUCTIONS

Fix brush

Important - Please read these instructions
fully before starting assembly

These instructions contain important information that will help
you get the best from your pressure washer, ensuring it is assembled
correctly and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067

AFTER SALES SUPPORT

0345 605 2067

1400W

High
Pressure Washer

Q1W-SP09-1450

QUICK START

GUIDE

Outlet

Inlet

ASSEMBLE PREPARE OPERATE

Install the inlet male connector,
connect garden hose and inlet
connector, and turn the water on.

Makes sure the ON/OFF switch is
in the OFF position.

Unlock the safety trigger on the
spray gun and press the trigger to
pull the water through the machine,
until a steady stream of water runs
from the lance.

Turn the nozzle to the desired
spray width and pull the trigger on
the spray gun to release a
pressured water spray.

Jet spray adjustment is very
aggressive. Do not adjust while
spraying. Switch the machine off
when interrupting your work for
extended periods of time.

Power on the pressure washer.

Special pressure washer
detergents can be used to increase
the cleaning power of the pressure
washer.

Connect garden hose and water
supply. Let the water run through
the hose and turn it off.

Add detergent