Spear & Jackson M0L-10ET-200 Quick Start Manual
IN THE BOX
1 11
Working head
2 12
Oil bottle cap
3 13
Bar sheath
4 14
Guide bar
5 15
Saw chain
6 16
Battery pack
7 17
Charger
8 18
Charger base
9 19
Safety lock-off button
10
Shoulder strapper
Front handle
Quick release for telescopic pole
Main switch
Hang buckle
Knob
Pole
Chain tension wheel
Chain cover fastening wheel
100ml lubrication oil
QUICK START
GUIDE
18V
Cordless
Pole Saw
M0L-10ET-200
2
1
11
10
9
14
13
6
12
16
15
19
17
8
5
4
18
3
7
Important - Please read these instructions
fully before starting assembly
These instructions contain important information that will help
you get the best from your pole saw, ensuring it is assembled correctly
and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067
AFTER SALES SUPPORT
0345 605 2067
ASSEMBLE PREPARE OPERATE
1 2
Attach the front handle,
tighten the knob.
3
Lift the clamping lever and extend
upper part of handle to
handle length into the tank.
Assemble the shoulder strap.
4 5
Check the battery capacity.
6 7
Push the oil bottle cap and
unscrew it, and add proper
lubrication oil.
Charging
Attach the battery pack to machine.
Make sure it is firmly attached.
8
9
13
Push safety switch (9) forward,
and press the on/off switch (13)
to turn the product on.
10
Loosen
Tighten
It is very important to adjust the
chain tension if the chain is
loose.
More detail, please check
manual.
Check that if the chain is loose
in every 10mins. How to adjust
the chain tension, see more
detail in instruction in manual.
9
Chain oil
Always check the oil by running
the saw before working.
Loading...