SPEAKERCRAFT Profile Aim8 Wide One ASM50811-2, Profile Aim8 Wide Three ASM50831-2 SpeakerCraft_Profile_TrueUp_Datasheet_Rev-A_0104_WEB_A4.pdf
Page 1
PROFILE SERIES
Profile AIM8 WIDE ONE | Profile AIM8 WIDE THREE
Profile AIM LCR5 FIVE | Profile AIM LCR3 FIVE
Profile AccuFit Ultra Slim ONE | Profile AccuFit Ultra Slim THREE
Page 2
IMPORTANT ADDITIONS TO THE
SPEAKERCRAFT PROFILE SERIES
We have rounded out the SpeakerCraft Prole Series with six new models dealers have been requesting.
With these new additions, our partners now have access to a complete line of In-Ceiling and In-Wall bezel-
less/angeless speakers that can be timbre-matched into virtually all residential audio applications—from
whole home audio entertainment to heart-pounding home cinema.
SpeakerCraft Prole delivers the virtually invisible aesthetics demanded by today’s discerning end-users
and installers—matched to the nest driver materials and crossover networks for uncompromised sound
quality and power handling in every residential application.
The two new LCR FIVE speakers deliver top-of-the-line performance with Kevlar woofers and aluminum/
Magnesium dome tweeters. The new WIDE Series additions are ideal for side and rear channels, timbrematched to existing ONE and THREE level speakers. And the AccuFit Ultra Slim ONE and THREE models
provide two new solutions where shallow depth speakers are required.
Profile IM WIDE Series
The Profile AIM WIDE Series features fully pivoting woofers and unique dual midrange-tweeter module.
The midrange-tweeter module is mounted directly over the woofer with dual, 2” dome midrange drivers
and dual 1” tweeters facing 70 degrees off axis from each other. The result is ultra-wide sound dispersion
with tremendous fidelity—the perfect design for home theater applications including side channels, rear
channels, or height channels. They also perform equally well in multi-room general applications where ultrawide dispersion is needed.
• 3-Way, Fully Pivoting
In-Ceiling Speaker featuring
an 8” Woofer, Dual 2”
Midranges and Dual 3/4”
Tweeters
• Flangeless Appearance
with Magnetically Attached
Full Coverage Steel Grille
• Pivoting 8” Graphite Cone
Woofer
• Dual 2” Graphite Inverted
Dome Midrange Drivers
• Dual 3/4” Silk Dome
Tweeters
• Front-Mounted Ambient/
Wide Switch
Profile AIM8
WIDE ONE
Wide Dispersion
Speaker
Order# ASM50811-2
• Timbre-Matched to All ONE
Series Speakers
• Sensitivity: 88dB 1W/1m
• Power Handling: 125 Watts
• Impedance:
8 Ohm Compatible
• Frequency Response:
40Hz - 20kHz
• Diameter x Depth:
11 7/16” x 6 1/2”
(291mm x 165mm)
• Cut-Out Diameter:
9 3/4” (248mm)
• 3-Way, Fully Pivoting
In-Ceiling Speaker featuring
an 8” Woofer, Dual 2”
Midranges and Dual 3/4”
Tweeters
• Flangeless Appearance
with Magnetically Attached
Full Coverage Steel Grille
• Pivoting 8” Aluminum Cone
Woofer
• Dual 2” Aluminum Inverted
Dome Midrange Drivers
• Dual 3/4” Aluminum Dome
Tweeters
Profile AIM8
WIDE THREE
Wide Dispersion
Speaker
Order# ASM50831-2
• Ambient/Wide & Treble
Switches
• Timbre-Matched to All
THREE Series Speakers
• Sensitivity: 91dB 1W/1m
• Power Handling: 150 Watts
• Impedance: 8 Ohm
• Frequency Response:
37Hz - 20kHz
• Diameter x Depth:
11 7/16” x 6 1/2”
(291mm x 165mm)
• Cut-Out Diameter:
9 3/4” (248mm)
Page 3
PROFILE SERIES HIGHLIGHTS:
• Bezel-less / Flangeless design
• Magnetically attached grilles
• Timbre matched levels to current
Profile levels
Profile IM LCR Series
The Profile AIM LCR Series was created to complement the trend of on-wall mounted flat panel television
viewing and is the perfect addition either beside, above or below any flat panel display. They are an ideal
choice in a multi-channel surround sound system for all channels when wanting identical performance
from each of the in-wall surround sound channels. The Profile AIM LCR Series offers the ability to pivot the
entire baffle, enabling the user to easily focus the sound into the primary listening area, creating a more
realistic and enveloping sound stage.
• 2 Way, In-Wall LCR (Left,
Center, Right) Speaker with
Dual 5 1/4” Woofers and
1” Tweeter mounted on a
Pivoting Speaker Baffle
• Flangeless Appearance
with Magnetically Attached
Full Coverage Steel Grille
• Pivoting Speaker Baffle
• Two - 5 1/4” Kevlar Woofers
with Phase Plugs
• Independently Pivoting
1” Aluminum/Magnesium
Dome Tweeter
• Bass & Treble EQ Switches
Profile AIM
LCR5 FIVE
Aim-able Speaker
Order# ASM54655-2
• Timbre-Matched to All FIVE
Series Speakers
• Sensitivity: 91dB 1W/1m
• Power Handling: 100 Watts
• Adjustable Impedance:
8/6 Ohm
• Frequency Response:
48Hz - 20kHz
• Dimensions: (H x W x D)
9 1/4” x 17 7/16” x 4”
235mm x 443mm x 102mm
• Wall Cut-Out: (H x W)
7 1/2” x 14 1/4”
(190mm x 362mm)
• 2 Way, In-Wall LCR (Left,
Center, Right) Speaker with
Dual 3” Woofers and 3/4”
Tweeter mounted on a
Pivoting Speaker Baffle
• Flangeless Appearance
with Magnetically Attached
Full Coverage Steel Grille
• Pivoting Speaker Baffle
• Two - 3” Kevlar® Woofers
with Phase Plugs
• Independently Pivoting
3/4” Aluminum/Magnesium
Dome Tweeter
• 2-Position Treble EQ Switch
Profile AIM
LCR3 FIVE
Aim-able Speaker
Order# ASM54651-2
• Timbre-Matched to All FIVE
Series Speakers
• Sensitivity: 86dB 1W/1m
• Power Handling: 60 Watts
• Impedance: 8 Ohm
Compatible
• Frequency Response:
60Hz - 20kHz
• Dimensions: (H x W x D)
10” x 5 3/4” x 3”
254mm x 146mm x 76mm
• Wall Cut-Out: (H x W)
9” x 4 3/4”
227mm x 120mm
Page 4
Profile AccuFit Ultra Slim
The AccuFit UltraSlim Series features a shallow 2” steel enclosure to address space limitations, building code
requirements, sound transfer to adjoining walls and living environment concerns. The Profile AccuFit UltraSlim
Series of shallow depth, fully enclosed speakers ensure that the drivers have the proper amount of air space
to deliver the best performance regardless of the installation environment.
• 3-Way, Shallow-Depth,
Tuned Port, Magnetically
Shielded Steel Enclosure
• Flangeless Appearance
with Magnetically Attached
Full Coverage Steel Grille
• Two 3” Custom
Polypropylene Inverted
Dome Woofers
• Two 3” Custom Aluminum
Inverted Dome Midrange
Drivers
• 3/4” Resin Coated Silk
Dome Tweeter
• Extreme, Shallow-Depth
Mounting Capability,
Needing only 2” (51mm) of
Depth
Profile AccuFit
Ultra Slim ONE
Shallow Depth
In-Ceiling Speaker
Order# ASM53101-2
• Timbre-Matched to All ONE
Series Speakers
• Sensitivity: 89dB 1W/1m
• Power Handling: 60 Watts
• Impedance: 8 Ohm
• Frequency Response:
90Hz - 20kHz
• STL (Sound Transmission
Loss) Feature, 20dBA Sound
Reduction / Measuring
signal: Pink Noise
• Diameter x Depth:
9 15/16” x 2”
252mm x 51mm
• Cut-Out Diameter:
8 1/4” (210mm)
• 3-Way, Shallow-Depth,
Tuned Port, Magnetically
Shielded Steel Enclosure
• Flangeless Appearance
with Magnetically Attached
Full Coverage Steel Grille
• Two 3” Custom Aluminum
Inverted Dome Woofers
• Two 3” Custom Aluminum
Inverted Dome Midrange
Drivers
• 3/4” Aluminum Tweeter
• Extreme, Shallow-Depth
Mounting Capability,
Needing only 2” (51mm) of
Depth
• Sensitivity: 90dB 1W/1m
Profile AccuFit
Ultra Slim THREE
Shallow Depth
In-Ceiling Speaker
Order# ASM53301-2
• Timbre-Matched to All
THREE Series Speakers
• Power Handling: 60 Watts
• Impedance: 8 Ohm
• Frequency Response:
90Hz - 20kHz
• STL (Sound Transmission
Loss) Feature, 20dBA Sound
Reduction / Measuring
signal: Pink Noise
• Diameter x Depth:
9 15/16” x 2”
252mm x 51mm
• Cut-Out Diameter:
8 1/4” (210mm)
1800 South McDowell Blvd. Petaluma, CA 94954 • 800-472-5555
www.speakercraft.com
© 2015 Core Brands, LLC. all rights reserved SpeakerCraft® is a registered
trademark of Core Brands, LLC. a Nortek Company. Rev-A - Nov. 2015
Loading...