XD2210-MX INSTALLATION INSTRUCTION
26"~55"
Max:400x400mm/16x16"
Min:100x100mm/4x4"
1 2
TV
(A0)
Before getting started, let’s make sure this mount is perfect for you!
1
MAX:400mm/16"
Is your TV VESA
1
equal to/greater than
100x100mm/4x4" and
equal to/less than
400x400mm/16x16"?
2
Does your TV
(including accessories)
weigh less than
44 LBS (20 kg)?
Where can you
3
install this mount?
MAX:
400mm/16"
Yes --- Perfect!
No --- This mount is NOT compatible.
Yes --- Perfect!
No --- This mount is NOT compatible.
0.5"(12.7mm) thick or above wooden board
Min. 0.5"(12.7mm)
Installation Tools
4
Safety Caution
5
2M2M
Band Tape
2m
Please read this instruction carefully before installation.
● The hardware provided in the package can only use in 0.5" thick or above wooden
board installation on RV.
● The wall must be capable of supporting five times the weight of the TV and mount
combined. According to the wall you're going to install, the structure of your RV may
require additional reinforcement.
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
● Do not apply this product to any purpose not indicated by Mounting Dream.
● Make sure to stow the TV and fully lock the mount in place before your RV is moving.
Pencil Screwdriver Electrodrill
Triangle
Bubble level
Socket Wrench
1/2"(13mm)
5/32"(4mm)
Wood Drill Bit
Parts and Hardware
2
WARNING:
swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.
This product contains small items that could be a choking hazard if
Allen Key
x1
Extended Arm Screws
M6x8mm
x8
Wall Plate
Unit
M4x12mm
x4
M5x12mm
x4
M6x12mm
x4
M8x25mm
x4 x4
TV Screws
M4x30mm
M5x30mm
M6x35mm
M8x50mm
Left Extended Arm
x4
x4
x4
Spacers
M5/M6x17mm
x4
10mm
x4
Washers
M5/M4
x4
Right Extended Arm
M8x22mm
x4
2.5mm
x8
M6
x4
x1
x2
1-1 Disassemble Wall Plate Unit into Two Pieces
x2x2
3
1-2 Choose Configuration
⑧ ⑧
② ②
⑤
① ①
④ ④
⑤
100mm x 100mm
①
100mm x 200mm
②
150mm x 150mm
⑨⑨
③
200mm x 100mm
④
200mm x 200mm
⑤
⑥
200mm x 300mm
① ①
⑨ ⑨
⑧ ⑧
② ②
⑤ ⑤
③
③ ③
④④
③
⑦
300mm x 200mm
300mm x 300mm
⑧
400mm x 200mm
⑨
400mm x 300mm
⑩
400mm x 400mm
⑥⑥
⑥⑥
⑩ ⑩
⑦
⑦
⑦⑦
⑩ ⑩
4
1-2
Extended arms assembly example (for reference)
1-3 Select TV Screws
M4
M5
M6
M8
1-4 Need Spacer?
No, go to PAGE 5 for detailed combination.
Bracket
Yes, go to PAGE 5 for detailed combination.
Bracket
Short Screw
Long Screw
Washer
TV back
Washer
Spacer
TV back
1-5 Attach TV Plate to TV Back
5
No!
Screw and washer
Spacer(s), screw and washer
Tips: If you need to combine M8(d/h) screw with 2.5mm spacer(n), you have to remove
the inner circle.
Wall Plate
6
Parts and Hardware
Lag Bolt M7x30mm
x4
Wooden Board
Bolt Head UP!
Min. 0.5"(12.7mm)
Wall plate
CAUTION:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!
To avoid potential personal injury or property damage:
5/32"
(4mm)
No!
Wall plate
Before hanging TV, please conduct "wall plate installation integrity test" first.
7
44 LBS (20 kg)
1 2
TV
4-1 Tilting angle adjustment (+5°/-15°)
8
：
Loosen handle and tilting bolt, adjust TV to your desired position,
then tighten handle and tilting bolt.
Tilting bolts
Tighten
Loosen
To tighten or loosen the handle
Handle
①
Turn handle (loosen or tighten)
until stopped by mount.
-15°
+5°
Handle
Pull out and hold the handle.
②
③
Turn the handle in the opposite direction.
④
Push and release the handle.
Turn handle again to tighten or loosen.
⑤
4-2 TV leveling adjustment (±5°):
9
Loosen 2 leveling bolts on the rear of TV plate by maximum 2
turns, adjust to level, and retighten to secure.
Loosen
Tighten
Push your TV to the wall until you hear the "click" sound.
Important ! Make sure to stow the TV and fully lock the mount in place
before your RV moves.
Stow
Pull and hold the strap
10
400mm
436mm
400mm
140mm
Pull out
78mm
+5°
473mm
436mm
260mm
+90°/-90
-15°
°
Loading...