Spatz SDISCALE Operation Manual

SDISCALE

3G-SDI SDI to HDMI Scaler

Operation Manual

Disclaimers

The information in this manual has been carefully checked and
is believed to be accurate. SPATZ assumes no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
SPATZ assumes no responsibility for any inaccuracies that may be
contained in this document. SPATZ also makes
no commitment to update or to keep current the information
contained in this document.
SPATZ reserves the right to make improvements to this
document and/or product at any time and without notice.

Copyright Notice

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer

file,

in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
SPATZ.

© Copyright 2011 by SPATZ. All Rights Reserved. Version 1.0
APRIL 2011

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:

 Always follow basic safety precautions to reduce the risk of

fire,

electrical shock and injury to persons.

 To prevent

fire

or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

VR0 20110325 Preliminary Release

Table of Contents

1. Introduction.................................................................................. 1

2. Applications ................................................................................. 1

3. Package Contents ...................................................................... 1

4. System Requirements.................................................................. 1

5. Features ........................................................................................ 1

6. Specifications .............................................................................. 2

7. Operation Controls and Functions............................................. 3

7.1 Front Panel.................................................................... 3

7.2 Rear Panel .................................................................... 3

8. OSD Menu and Function List....................................................... 4

9. Connection and Installation ...................................................... 8