Page 1
Halo™
USB Ultrasonic Essential Oil Diffuser
INSTRUCTIONS
PARTS
FEATURES CARE & MAINTENANCE
Ultrasonic vibrations transform your essential oil and water
into healthy, fragrant mist.
1.
Water Capacity: 120 mL (4.06 fl oz)
2.
Coverage Area: Up to 100 sq ft
3.
Continuous Operation: Up to 5 hours
4.
Light Mode: White, rotating color, freeze color,
or OFF
5.
Automatic safety shut-off
6.
Power: Includes USB power cord (fits into any
standard USB port)
Only use the USB Cable supplied with the unit.
Always remove the power cord before cleaning.
Essential oil should not come in contact with the exterior
surface of the unit.
TO CLEAN:
* SpaRoom® KLENZOR™ tablets may be used to
renew diffuser to like-new condition.
Remove Outer Cover and Water Tank Lid. Empty the water
from the Water Tank away from the Air Outlet.
The Ceramic Disc located in the center of the Water Tank
should not come in contact with any hard or sharp objects.
To remove possible buildup, gently use a cotton swab dipped
in white vinegar to wipe out the inside weekly.
Dry with a soft cloth to avoid mineral buildup.
Do not use strong cleaning agents.
INSTRUCTIONS FOR USE
Place diffuser on a flat, water-resistant surface.
1.
Plug the Connector of the USB Power Cord into the DC Socket on the
bottom of the unit.
2.
Remove Outer Cover. Remove Water Tank Lid from the Base.
3.
Pour tap water into the Water Tank up to the Max Water Level Line.
Add 2-3 drops of essential oil (not included) directly into the Water
Tank.
4.
Replace the Water Tank Lid onto the Base. Replace the Outer Cover.
5.
Plug the USB End of the Power Cord into any USB port.
6.
Power Button Functions:
Left Side – Light:
1st Push = Warm white light
2nd Push = Rotating color
3rd Push = Maintains solid color
4th Push = Turns light off
Right Side – Mist:
1st Push = Continuous mist
2nd Push = Turns mist off
NOTES:
• The unit will automatically stop misting when water level becomes too low or when Outer Cover is removed.
• If the Water Tank is empty, the unit will beep once when pressing the Mist Button.
• Disconnect USB Cable from power source when not in use.
Loading...