Page 1
Mysto™
Ultrasonic Essential Oil Diffuser
INSTRUCTIONS
PARTS
FEATURES CARE & MAINTENANCE
Ultrasonic vibrations transform water and essential oil into
fragrant mist.
1.
Water Capacity: 140 mL (4.7 fl oz)
2.
Suggested Area: Up to 200 sq ft
3.
Continuous Operation: Up to 5 hours*
Intermittent Operation: Up to 10 hours*
* Run time will vary depending on humidity
levels and other external factors.
4.
Light Mode: Bright white or soft white glow
5.
Automatic safety shut-off
6.
Power: Includes c ETL us approved AC Adapter
INSTRUCTIONS FOR USE
1.
Remove Top Cover from the Main Body.
2.
Pour tap water into the Water Tank up to the Max Fill Line. Add 5-8
drops of essential oil (not included) directly into the Water Tank.
3.
Replace Top Cover onto the top of the Main Body.
4.
Insert the Adapter’s DC connector into the DC Socket input located
on the back of the Main Body. Plug the AC end of the Adapter into
an electrical wall outlet.
5.
Power Button Functions:
1st Push = Continuous mist and bright white light
2nd Push = Continuous mist and soft white glow
3rd Push = Intermittent mist and bright white light
4th Push = Intermittent mist and soft white glow
5th Push = Turns unit off completely
NOTES:
• The unit will automatically shut off completely when water
level becomes too low.
• Disconnect Adapter from electrical outlet when not in use.
Only use the power cord supplied with the unit.
Always remove the power cord before cleaning.
Essential oil should not come in contact with the
exterior surface of the unit.
TO CLEAN:
Remove Top Cover. Empty the water from the Main
Body away from the Air Outlet.
The Ceramic Disc inside the bottom of the unit should
not come in contact with any hard or sharp objects.
To remove possible buildup, gently use a cotton swab
dipped in white vinegar to wipe out the inside. A
cleaning brush is included.
Dry with a soft cloth to avoid mineral buildup.
Do not use strong cleaning agents.
Loading...