Sparky Group TV 1840 Operating Instructions Manual
9
OPERATING INSTRUCTIONS
ENGLISH
SPECIFICATIONS
Model
Power input
Supply voltage / frequency
Chain speed
Drive sprocket
Symmetrical guide
Guide length
Chain
Pitch-gauge
Number of drive links
Automatic chain lubrication
Emergency auto-stop chain brake
- Front guard activation
Weight
Safety class
These models SPARKY power tools are supplied from
single-phase alternating current mains. They are double
insulated according to EN 50144, IEC 60745 and can
be connected to grounded or not grounded sockets.
These power tools are radio suppressed in compliance
with EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
for radio interference.
MAIN COMPONENTS
1. Guide
2. Chain
3. Tensioning pin
4. Chain cover
5. Tensioning screw
6. Chain cover screws
7. Oil level indicator
8. Oil reservoir
9. Front guard
10. ON/OFF trigger
11. Safety button
12. Handle
13. Brush retaining screws
14. Screw
15. Chain sheath
READ BEFORE USE! ATTENTION,
DANGEROUS OPERATIONS!
Before initial operation, please read carefully the
Operating and Safety Instructions. Familiarise with the
basic functions and proper use of the machine.
SAFETY OPERATION INSTRUCTIONS
AND PRECAUTIONS
The chainsaw is designed for sawing wood, planks, laths,
etc.
Before starting to operate the power tool, always check
the following:
- Make sure power supply voltage corresponds to the
value indicated on the name plate with technical data
of the tool;
- Make sure the cord and the plug are in order. In case
of faults the defective item must be replaced by an
authorised person.
DURING CARRYING OUT ANY WORK, PLEASE DO
OBSERVE THE FOLLOWING SAFETY REQUIREMENTS:
Double insulated power tool:
The machine operates with single-phase alternating current only. The supply and the extension cables
do not require protective (earthing) wire.
Use proper cables when operating out of doors;
Do not allow children to operate the tool;
Keep children away!
Do not use or expose the chainsaw when it is
raining.
Do not use a machine, repaired by unauthorised
person or if it is not completely equipped.
Wear appropriate clothing! Do not wear loose
clothing or accessories, which might be caught by
moving parts of the machine.
Make sure that you are in a stable, adequately
balanced position before you start operating the saw.
Search for a secure and steady position of your body;
Do not operate the machine if the chain is damaged
or excessively worn;
During operation always hold the saw firmly with both
hands;
Do not force the machine! The maximum length of
cut is 400 mm.
Beware of rebounds (see paragraph below);
The use of sheath, strong gloves, non-skid footwear, goggles and ear mufflers is recommended during operation;
TV 1840
1800 W
230 V – 50 Hz
11 m/s
replaceable
yes
400 mm (16”)
non-rebounding, chrome-plated
3/8" – 0,05”
56
yes
yes
4,8 kg
II
MAX 400 mm
Loading...