Spark Amp
User Manual
Table of Contents
Product Spec
02
Hardware Control (top)
03
Hardware Control (rear)
04
Bluetooth Speaker
04
USB Recording
05
Factory Reset
05
App Connection
07
Tone Adjustment via App
08
Auto Chords
09
Smart Jam
10
Voice Control
11
12
13
App Utilities
Contact us
01
Product Specification
AUDIO SPECIFICATIONS
FREQUENCY RANGE
20-20000 Hz
STEREO/MONO
Stereo
MAXIMUM SOUND PRESSURE LEVEL
116 dB SPL @1m
CABINET PRINCIPLE
Bass-reflex
POWER AMPLIFIERS
40 Watt Class D Amplifier
SPEAKERS
Two - 4" Custom Designed Speakers
TOTAL IMPEDANCE
4 ohms
POWER
MAINS INPUT VOLTAGE
100 - 240 V
MAINS FREQUENCY
50/60 Hz
INCLUDED IN THE BOX
BOX CONTENTS
Spark Amplifier
Power Adaptor
USB Cable
Quick Start Guide
Free Studio One Prime
SOFTWARE
MOBILE APPS
Spark App for iOS and Android
PHYSICAL UNIT
DIMENSIONS
350 x 180 x 190 mm
(13.78 x 7.08 x 7.48 in)
WEIGHT
5.2 kg
11.46 lb
COVERING
Black Textured Vinyl
GRILLE CLOTH
Custom Black/Brown
HANDLE
Removable Leather Handle
SOFTWARE
CONTROLS AND CONNECTIVITY
TOP PANEL CONTROLS
Amp Type
Gain, Bass, Mid, Treble, Master, Mod, Delay, Reverb
Output Volume
Music Volume
Four Programmable Preset Buttons
Tap/Tuner Button
ONBOARD EFFECTS
30 Amp Models
40 Effects
(Noise Gate, Compressor, Distortion, Modulation,
Delay, Reverb)
WIRED CONNECTIVITY
1/4" Guitar Input
1/8" Aux Input
1/8" Headphone
WIRELESS CONNECTIVITY
Bluetooth Audio
USB AUDIO
USB Interface for Recording
1 In x 2 Out
02
TOP CONTROL PANEL
(A) Power Switch
(B) Tap / Tuner
Long press the button to engage TUNER mode. While in TUNER mode, the TAP and 4 Preset LEDs
indicate the pitch being played. Long press the button again to exit TUNER mode. The guitar signal
becomes muted when TUNER mode is engaged.!
The tempo of the delay effect can be set by tapping (more than twice) on the switch.!
(C ) Preset Switches
Tap to select one of the 4 presets stored on the Spark amp. The red LED flashes to indicate that the preset
has been modified. Long-press the switch again to overwrite the preset.!
(D) Adjust the volume from Bluetooth audio, AUX in, or USB audio playback.
(E) Headphone Port
Main speaker sound is muted when a connector is inserted into this port.!
(F) Amp Type
Changes the amp model in the current preset.!
Use the SPARK app to access amp models not selectable by this switch.!
(G) Amp Control
Controls the gain, EQ, and volume of the amp model in the current preset.!
(H) Effects Control
Adjusts the amount of Modulation, Delay, and Reverb in the current preset.!
Use the SPARK app to change the effects type and detailed effects settings.!
(I) Output
Adjusts the overall volume of your guitar.!
(J) Guitar Input
03
REAR PANEL
USING SPARK AMP AS A WIRELESS SPEAKER
•
Turn on the Bluetooth function on your device, then select “Spark 40 Audio” from the list of available
options.!
•
Spark Amp automatically pairs with previously connected devices when turned on. It can also be paired
with other devices (for example, if a previously connected device is not available).
•
To reset pairing information, turn on Spark Amp while holding down preset button 4 for 3 seconds.
Remove Spark Amp from recognized devices in Bluetooth settings before pairing again.
(K) Bluetooth Status Indicator
Indicates the status of your Bluetooth audio connection:
•
Connected (blue light)
•
Waiting to connect (flashes)
•
Disabled (LED off)!
•
(L) AUX In
Connect the analog output of an audio device to this port. USB audio playback and Bluetooth audio are
disabled when a connector is inserted into this port.!
(M) USB Port
Use the supplied USB cable to connect your computer to the Spark amp for USB recording or firmware
updates.!
(N) DC In
Connects the supplied power adapter. Only use the specified AC adapter. Using any other AC adapter may
cause malfunctions.!
04
Loading...