r
IMPRESSIVELY COMPACT
a
p
s
k
U S E R G U I D E
16GB
spark
IMPRESSIVELY COMPACT
16GB
USER GUIDE
BEFORE OPERATING YOUR SPARK TABLET, PLEASE READ,
UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS
USER GUIDE
1
KNOW YOUR SPARK TABLET
Appearance
1. Touch Panel
2. Front Camera
3. Back camera
4. Mute Button
5. Volume +
6. Volume –
7. Power On/Off button
8. Antenna cover
9. Earphone jack
10. SIM card slot
11. USB jack
12. Speaker
USER GUIDE
2
2
SPECIFICATIONS
Display
Screen Size 7.85 Inches
Resolution 1024 X 768
Type Of Touch Screen 5 POINT Capacitive
Processor / Memory
CPU MTK 8382 Quad Core Cortex A7
Processor Clock Speed In Ghz 1.2ghz
RAM 1GB
ROM(Internal Memory) 16GB(Expandable To 32GB)
Operating System
System(In Built Operating System) Android 4.2 (Jelly Bean)
Connectivity
Wi-Fi 802.11/B/G/N
GPS Supported
Bluetooth Supported
FM Radio Supported
Communication Networking GSM, GPRS, EDGE, 3G, HSDPA
Media
Camera 2.0MP Front And 5.0MP Rear Camera
Picture Format BMP,JPEG,PNG,GIF
Audio Playback MP3, AAC+, Amr-Wb/+, Eaac+, Windows
Media
Video Playback Mpeg-4, H.263, H.264, Windows Media
Power
Battery Type Li-Polymer
Battery Capacity In Mah 4000mah
Stand By Time In Hours 100-120 Hours
Talk Time In Hours 5-6 Hours
Total Time To Charge Internal Battery Fully 4-5 Hours
Dimensional Details
3D 198 × 135 X 7.0mm
Language Options
System Language Multi-OSD Languages
USER GUIDE
3
3
How to Use Your Spark Tablet
Turning the Tablet “On/Off”
Turn On：To turn “ON”, press and hold the <POWER> button down until the
screen comes on. It takes approximately 8 seconds for the system to boot. The
following image shows how the screen looks like after booting.
Turn Off：Hold down the <POWER> button in the unlock mode to display the
Power Off option and the navigation bar control option.
USER GUIDE
4
4
Settings
To enter this section, click on the settings icon:
Here, various aspects of the device can be set, including Wi-Fi, Bluetooth,
display, memory, etc. Please refer to the image below:
USER GUIDE
5
5
Wireless Connection
Click the "Settings" icon on the main menu ( ), and then click on "Wi-Fi".
Once the WiFi switch is turned on, the Wi-Fi module will search for Available
networks automatically. Please follow the prompts shown below and input the
required data to complete registration for the Wi-Fi connection.
In an encrypted network, you need to enter a valid key (password) to connect
to the network. Please refer to the image below:
When the network connection is completed, click on the connected network to
check its status. Please refer to the image below:
For a quick Wi-Fi setup, you can swipe down from the top right side of the
home screen. Then click on the Wi-Fi icon to connect automatically to a
previously saved Wi-Fi network. However, you must ensure that you have
Wi-Fi network in your area, and a saved network password.
USER GUIDE
6
6
Bluetooth
Click on the Bluetooth option. To see other devices, turn Bluetooth on by
sliding the switch to the right. You can click on "ANDROID BT" to toggle
between Bluetooth device statuses. Please refer to the image below:
Loading...