SOYO SY-K7VLM-B User Manual

Hardware

Installation

Quick BIOS

Introduction

The SOYO CD

SY-K7VLM-B

Motherboard

Setup

Quick Start Guide

SOYO™

2

SY-K7VLM-B Motherboard

Socket 462 for AMD® Athlon/DuronTM processors
VIA VT8364 AGP/PCI Motherboard
200 MHz Front Side Bus supported
Micro ATX Form Factor

Copyright © 2001 by Soyo Computer Inc.

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of
their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification
purposes only. The registered trademarks and copyrights belong to their respective companies.

Copyright Notice:

All rights reserved. This manual has been copyrighted by Soyo Computer Inc. No part of this
manual may be reproduced, transmitted, transcribed, translated into any other language, or
stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo
Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this
manual. We reserve the right to amend the manual or revise the specifications of the product
described in it from time to time without obligation to notify any person of such revision or
amend. The information contained in this manual is provided to our customers for general use.
Customers should be aware that the personal computer field is subject to many patents. All of
our customers should ensure that their use of our products does not infringe upon any patents. It
is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to
infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing
the Motherboard. Information in this guide has been carefully checked for reliability; however,
to the correctness of the contents there is no guarantee given. The information in this document
is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

K7VLM-B Serial - Version 1.0 - Edition: January 2001

* These specifications are subject to amend without notice

3

Introduction

11

SY-K7VLM-B

Introduction

Quick Start Guide

Congratulations on your purchase of the
illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For
further information, please refer to the SY-K7VLM-B Motherboard Users’ Guide that came
with your Motherboard.

SY-K7VLM-B

Motherboard. This Quick Start Guide

Unpacking

When unpacking the Motherboard, check for the following items:

u

The SY-K7VLM-B VT8364 AGP/PCI Motherboard

u

The Quick Start Guide

u

The Installation CD-ROM

u

SOYO Bonus Pack CD-ROM

u

One IDE Device ATA 66 Flat Cable

u

One Floppy Disk Drive Flat Cable

u

One Heat Sink Compound

SY-K7VLM-B Quick Start Guide

4

Introduction

PCI2

3V

Lithium

1

FLP

Intel

82802AC

SIRCON

1

USB3_4

1

1

5

5

CPUFAN1

1

CHAFAN1

DIMM 1

DIMM 2

VT82C686B

CHAFAN2

CPUFAN2

1

3

JP5

Jumper

CMOS Clear

Speaker

_

+

_

+

_

+

Reset

PWRBT

Power LED

SY-K7VLM-B Motherboard Layout

PS/2 KB

PS/2 Mouse

Connector

Connector

USB 1

USB 2

PRT

COM A

ATX Power

1

1

VGA

GAME

LINE-OUT
LINE-IN

AUXIN

1

4

1

1

1

CDIN1

4

4

PHOIN

MIC JACK

JP10

PCI1

WOL

Header

3
1

Flash BIOS

PCI3

5

IDE 2

IDE 1

1

HDD LED

Battery

1

5

Introduction

Ø

Supports Socket A (Socket 462)
AMD® processors
Athlon(750MHz~1.2+GHz)
/Duron(600MHz~850+MHz)

Ø

Supports 100 MHz Front Side Bus
Frequency

Ø

PC99, ACPI

Ø

Ultra DMA33/66/100 (ATA
33/66/100)

Ø

Supports Wake-On-LAN (WOL)

Ø

Power-on by modem and alarm

SY-K7VLM-B

Key Features

Ø

Ø

Ø

Ø

Ø

Ø

Ø
Ø

Quick Start Guide

Supports onboard hardware
monitoring

Supports multiple-boot function
3 x 32-bit bus mastering PCI slots
4 x USB ports onboard (USB3/4)
1 x IrDA port
ATX power connector

Y2K Compliant
Support FOC (Fan Off Control)
function

SY-K7VLM-B Quick Start Guide

6

Hardware

Installation

22

l

l

l

Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new
please refer to the SY-K7VLM-B Motherboard User's guide and Technical Reference online
manual on in the CD-ROM package that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully:

u

Installation

To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:

Before handling the Motherboard, ground yourself by touching on to an unpainted
portion of the system's metal chassis.

Remove the Motherboard from its anti-static packaging. Hold the motherboard by the
edges and avoid touching its components.

Check the Motherboard for damage. If any chip appears to be loose, press carefully
to seat it firmly in its socket.

SY-K7VLM-B

AMD® Socket462 processor with built-in CPU cooling fan (boxed type)

Motherboard. For detailed information,

u

u

u

u

u

u

u

u

Note: 1.

SDRAM module(s)
Computer case with adequate power supply unit
Monitor
PS/2 Keyboard
Pointing Device (PS/2 Mouse)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive…
External Peripherals: Printer, Plotter, and Modem (optional)

If you want to use an external speaker connected to "Line-out" port, please make

sure to use an "amplified speaker" that can generate proper output sound volume.

SY-K7VLM-B

7

Hardware

Installation

Quick Start Guide

Install the Motherboard

To perform the installation of your new

Step 1. CPU Installation

FOC ( Fan-Off Control )

The newly designed SOYO “FOC” is based on the concept of total protection for CPU,
which is very different from currently seen on the market. The H/W control function is used to
see a passive security system of monitoring and warning. “FOC”, designed by SOYO, gives
emphasis on the concept of total protection. S/W Simultaneous Signal Follow-ups techniques
and Auto Power Off System are included to prevent all possible damage caused by the MAL­functioning of the CPU fan. With the help of “O/S On Time Monitoring And Warning” function,
provided by the H/W monitoring system, the double-protection purpose is achieved.

“FOC” includes the following functions:
(1) Simultaneous Signal Follow Ups: Before the system enters the O/S, H/W will detect the

signals of the CPU fan pins, get their revolution information and send it to the
BIOS.

(2) Auto Power Off System: If the BIOS gets the information of CPU fan revolution, it goes

on working normally. If not, it will inform the system and have the power supply
disconnected immediately. Thus, the CPU is protected from over heating.

Note: The following must be observed to secure the normal functioning of “Fan-Off Control”:

1. CPU fan with sensor pins must be used.

2. CPU fans approved by AMD are strongly recommended.

3. The “HOT KEY” function is provided for the CPU fans without sensor pins, to avoid

the power off. Users may press the “Insert” key to jump over the “Power Off” mode;
go to the BIOS and disable “FOC”. Now system can be booted normally.

4. The power connector of the CPU fan must be connected to the specified “CPU Fan

Connector” on the motherboard to secure the normal functioning of the system.

SY-K7VLM-B

Motherboard, follow the steps below:

We provide the following User-Friendly protection features:

1.Fan-Off Control : The motherboard detects the status of the CPU fan and protects the

CPU by automatically disconnecting the power supply. The default value of this
function is Enable. After booting up, the user may disable it.

2.CPU Socket Sticker : Users will find a sticker on the CPU socket, which reminds

them of the correct usage of the K7 CPU.

3. Heat Dissipation Paste: Heat Dissipation Paste is included for all Socket-A

motherboards, to enhance the heat dissipation capability.

Furthermore, we strongly recommend our users to enable the function of H/W monitoring in the

SY-K7VLM-B Quick Start Guide

8

Hardware

Installation

4

2

BIOS. This function, together with the FOC, provide the total protection to the CPU and allow it
to maximize its performance.

Mark your CPU Frequency:

should be clearly marked on the CPU cover.

FSB 200MHz (Athlon/Duron)
Athlon

750 MHz (100 x 7.5) 800 MHz (100 x 8.0) 850 MHz (100 x 8.5) 900 MHz (100 x 9.0)
950 MHz (100 x 9.5) 1000 MHz (100 x 10.0) 1.1GHz (100 x 11.0) 1.2GHz(100 x 12.0)

Duron

600 MHz (100 x 6.0) 650 MHz (100 x 6.5) 700 MHz (100 x 7.0) 750 MHz (100 x 7.5)
800 MHz (100 x 8.0) 850 MHz (100 x 8.5)

Record the working frequency of your CPU that

CPU Mount Procedure:

To mount the AMD® & Athlon/DuronTM processor that you

have purchased separately, follow these instructions.

1

1

3

1. Lift the socket handle up to a vertical position.

2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.

3. Seat the processor in the socket completely and without forcing.

4. Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the

system. It prevents the equipment from overheating and prolongs the life of
your CPU.

SY-K7VLM-B

9

Hardware

Installation

_

+

_

+

_

+

Reset

Power LED

HDD LED

Quick Start Guide

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis

Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On­LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-K7VLM-B
Motherboard, please refer to SY-K7VLM-B Motherboard User's Guide and Technical
Reference online manual on the CD-ROM.

Connectors and Plug-ins

Standard IrDA (Infrared Device Header):

SIRCON

Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3
VCC NC IRRX GND IRTX

USB3_4: USB3 USB3_4: USB4

Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10

Power Data(-) Data(+) GND Power Data(-) Data(+) GND GND

CPU Cooling Fan:

CPUFAN

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND 12V SENSOR GND 12V NC GND 12V SENSOR

Connect the CD Line-in cord from the CD-ROM device to
the matching header CDIN1

PWRBT

Speaker

HDD LED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LED Anode LED Cathode Power On/Off GND Power Good GND

Connect your power switch to this header (momentary switch type).

To turn off the system, please press this switch and hold down for longer than 4
seconds.

CPU Cooling Fan:

CPUFAN2

CD Line-in: CDIN1

Pin1 Pin2 Pin3

Pin1 Pin2 Pin3 Pin4

5V NC NC Speaker out

ATX POWER On/Off : PWRBT

Wake-On-LAN Header: JP10

5VSB GND MP-Wakeup

Chassis Fan: CHAFAN1

Pin 1 Pin 2 Pin 3 Pin 4

L G G R

Power LED

5V NC GND

Speaker

SY-K7VLM-B Quick Start Guide

10

Hardware

Installation

123

123

ATX Power Supply: ATX PW

Attach the ATX Power cable to this connector. (This motherboard requires an ATX power supply, an AT
power supply can NOT be used.)

When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to
provide at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.

Step 3. Configure Memory

Your board comes with two DIMM sockets, providing support for up to 1GB of main memory
using unbuffered and registered DIMM modules from 32MB to 512MB. PC100/133 DIMM
module is required on this motherboard.

Memory Configuration Table

Number of Memory Modules DIMM 1 DIMM 2

RAM Type SDRAM/ VCM SDRAM

Memory Module Size (MB) 32/64/128/256/512 MB

CMOS Clear (JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear
CMOS memory.

1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper

can be easily identified by its white colored cap.

2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

CMOS Clearing

JP5 Setting

Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.

Clear CMOS Data Retain CMOS Data

Short pin 2-3 for

at least 5 seconds to

clear the CMOS

Short pin 1-2 to

retain new settings

SY-K7VLM-B

11

Quick BIOS

33

This Motherboard does not require any hardware jumpers to set the CPU operating
frequency.

Quick BIOS Setup

Quick Start Guide

After completion of hardware installation, turn the power switch on, then press the
the system diagnostic is checking to enter the Award BIOS Setup program. The CMOS SETUP
UTILITY will be displayed on screen. Then follow these steps to configure the CPU settings.

Step 1. Select [Standard CMOS Features]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.

Step 2. Select [Load Optimized Defaults]

Select the “Load Optimized Defaults” menu and type “Y” at the prompt to load the BIOS
optimal setup.

Step 3. Select [SAVE & EXIT SETUP]

Press

<Enter>

to save the new configuration to the CMOS memory, and continue with the

boot sequence.

<DEL>

key while

Setup

SY-K7VLM-B

12

The SOYO CD

44

Your SY-K7VLM-B Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO
CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software
available for installation, and (3) a database in HTML format with information on SOYO
Motherboards and other products.

Step 1. Insert the SOYO CD into the CD-ROM drive

If you use Windows NT, the SOYO-CD will not detect your motherboard type. In that case
the following dialog will pop up, please choose your motherboard and press OK. Now the
SOYO-CD Start Up Menu will be shown.

The SOYO CD

The SOYO-CD will NOT autorun if you use it on an Operating System other
than Windows 9x or NT.

Quick Start Guide

Please Select Your Board

7IWA-F
7IWA-F V1.0
6IWM/L
6IWM
6IWA

OK

(SOYO CD Start Up Program Menu)

If you use Windows 95 or 98, the SOYO CD Start Up Program automatically detects
which SOYO Motherboard you own and displays the corresponding model name.

LI-7000
7IWB
7IWB V1.0
7IWM
7IWM/L V1

Cancel

X

SY-K7VLM-B

13

The SOYO CD

The user's manual files included on the SOYO CD are in PDF (Postscript Document)
format. In order to read a PDF file, the appropriate Acrobat Reader software must be
installed in your system.

Quick Start Guide

Note:

The Start Up program automatically detects if the Acrobat Reader utility is already
present in your system, and otherwise prompts you on whether or not you want to install it.
You must install the Acrobat Reader utility to be able to read the user's manual file. Follow
the instructions on your screen during installation, then once the installation is completed,
restart your system and re-run the SOYO CD.

Step 2. Install Drivers and Utilities

Click the
with your Motherboard. The Start Up program displays the drivers available for the
particular model of Motherboard you own. We recommend that you only install those
drivers.

Install Drivers

button to display the list of drivers software that can be installed

SY-K7VLM-B

14

The SOYO CD

driver revision:

VIA 4 in 1 driver package for Win 9x/NT
VIA8365 Pro Savage Display Driver for Win 9x/Me
VIA8365 Pro Savage Display Driver for Win 2000
VIA8365 Pro Savage Display Driver for Win NT4.0
VIA Ac97 Codec Driver for Win 9x/NT/2000

VIA hardware monitor(R) for (Win 95/98)

Quick Start Guide

Cancel

OK

(Driver Installation Menu)

A short description of all available drivers follows:

Ø VIA 4in1 driver package for Win 9x/NT

The 4 in 1 driver package includes all drivers your motherboard needs. After selecting this
driver package, one driver will be installed automatically (the IRQ remapping utility), the
other three are installed if selected. By default all three drivers are selected. A description of
the 4 drivers follows:

 Bus Master PCI IDE Driver

This driver will speed up the data-transfer rate to and from the harddisk.

 VxD Driver

This driver must be installed in order to be able to make use of the on-board AGP
Video functionality.

 VIA Chipset Functions Registry

This driver will make the necessary changes to the Windows registry, in order to
make sure that Windows has no problems recognizing your VIA chipset.

 IRQ remapping utility (This driver is installed automatically)

This utility will remap the IRQ lines to make sure that everything functions properly
under Windows.

Ø VIA8365 Pro Savage Display Driver for Win 9x/Me

In order to be able to make use of the integrated VGA function in your VIA S3 chipset, you
will need to install this driver first. For Win 9x/Me only.

Ø VIA8365 Pro Savage Display Driver for Win 2000

In order to be able to make use of the integrated VGA function in your VIA S3 chipset, you
will need to install this driver first. For Win 2000 only.

SY-K7VLM-B

15

The SOYO CD

Ø VIA8365 Pro Savage Display Driver for Win NT4.0

In order to be able to make use of the integrated VGA function in your VIA S3 chipset, you
will need to install this driver first. For Win NT4.0 only.

Ø VIA Ac97 Codec Driver for Win 9x/NT/2000

You have to install the drivers before installing any application for the Ac97 codec.

Ø VIA hardware monitor(R) for (Win 95/98)

Your motherboard comes with a hardware monitoring IC. By installing this utility
Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms
when current system values exceed or fall below pre-set values.

Quick Start Guide

Select which driver you want to install and click
installation and return to the main menu.

Note:

Once you have selected a driver, the system will automatically exit the SOYO CD to
begin the driver installation program. When the installation is complete, most drivers
require to restart your system before they can become active.

OK,

or click

Cancel

to abort the driver

Step 3. Check the Latest Releases

Click the 'Check the latest Releases' button to go the SOYO Website to automatically find
the latest BIOS, manual and driver releases for your motherboard. This button will only
work if your computer is connected to the internet through a network or modem
connection. Make sure to get your modem connection up before clicking this button.

(* Internet Explorer is a Microsoft Trademark)

SY-K7VLM-B

16

Quick Start Guide

Quick Trouble shoot tips

Video (no display) related issues

I built a new computer system using a Soyo board and nothing happens when
turning it on, no video and no beeps from the PC speaker. What is happening
and how can it be fixed?

No screen and no beeps mean that your CPU and motherboard do not work at all. It
could be that the CPU is not seated correctly or that a component on the M/B is
grounded (shorted) with the case. Also make sure to check the voltage setting
switch (110V/220V) on the back of the power supply. To isolate the problem do
the following:

1. Press and hold down on the “Ins” (insert) key while turning on the computer
until you get video. If you do not get video then,

2. Double-check jumpers setting on you motherboard and remove all add-on
cards, unplug all hard-disk and floppy-disk drive cables and see if you can hear
some beeps. If you still do not get any beeps, then try putting the motherboard on
the table (to isolate it from the case) with the CPU and speaker only, and give it one
more try.

BIOS Issues

Where can I find the BIOS revision of my mainboard?

It will be displayed on the up-left corner on the screen during boot-up. It will show
as your board type followed by the revision number, such as 5EH_2CA1 (meaning
revision 2CA1 for the SY-5EH board) or 6BA+ IV_2AA2 which means SY-6BA+
IV motherboard with 2AA2 bios.

Where can I find the latest BIOS of my motherboard?

Please go to the technical support page of one of the SOYO websites (Taiwan:

www.soyo.com.tw), and look up your motherboard to find the latest BIOS

revision.

Hard disk, floppy drive, CD-ROM etc

When I boot up my new computer I got "floppy boot failure" and the LED on
the floppy stays on

Make sure the red wire of floppy ribbon cable goes to Pin1 on the floppy drive side
(don't trust the "key lock" or "notch") and use the end-connector of the cable (don't
use middle one).

SY-K7VLM-B

17

Quick Start Guide

Modem issues

I have installed my modem drivers several times and I still cannot get my
modem to work. Why?

If you are sure that the modem driver has been installed correctly, then you need to
install the south bridge driver from the SOYO CD, this is because Windows does
not properly recognize relatively new chipsets.

Audio Issues

I do not get any sound from my sound card. What could be wrong?

Please make sure the speaker is connected to the speaker out port on your sound card.

In Device Manager, I keep getting yellow exclamation signs on my sound port
even though I have installed my sound driver several times and I could not get
my sound card to work. What is wrong?

It is likely that you did not have the correct driver installed. If you are sure that the
correct sound driver has been installed, then please install the 'south bridge' driver
for the motherboard.

The sound is working in my system, but when I play CD music from the CD­ROM, I do not get any sound. What is wrong?

This is because the 3-wire audio cable from the CD-ROM to the sound card is not
connected or it is loose.

The sound and everything else works fine except that the recorder and
microphone do not work. What is wrong?

This is because the recorder and microphone in the Windows are not enabled.
Please go to sound properties and enable them.

Lock up (freeze)

When I boot up my system, everything works fine. It sees my CPU and
memory, detects my hard drive, floppy drive and CD-ROM but locks up at
"Verify DMI pool data... ", and it won’t go any further. What should I do?

Please clear the CMOS via JP5 then choose 'load setup default' in the bios and save
the bios and exit. Next, unplug all other add-on cards except the video card and
floppy drive controller, and see if it can boot from floppy. Then put back the
peripherals one by one to identify which one causes the lockup. If you are running a
Cyrix CPU, make sure the 'linear burst function' is enabled in the bios.

I can not get my board to run properly.

Please make sure you have the latest bios and driver from the SOYO web site at:

http://www.soyo.com

SY-K7VLM-B

18

How to contact us:

n If you are interested in our products, please contact the SOYO sales

department in the region you live.

n If you require Technical Assistance, please contact our Technical Support in

the region you live.
SOYO prefers Email as communication medium, remember to always add to the
email the country that you live in.

Quick Start Guide

SOYO Taiwan

No. 21 Wu-Kung 5 Rd., Hsin Chuang
City, Taipei Hsien, Taiwan

Region Covered: Taiwan and Asia­Pacific. (Including Australia).

Web Site: www.soyo.com.tw

Sales:

Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Technical Support:

Fax: [phone]
E-mail: [e-mail]

SOYO Europe BV

Signaalrood 19, 2718 SH Zoetermeer
The Netherlands

Region Covered: Europe except
Germany and United Kingdom

Web Site: www.soyo.nl, www.soyo-

europe.com

Sales:

Tel: [phone]
Fax: [phone]
Email: [e-mail]

Technical Support:

Tel : [phone]
Fax: [phone]
Email: [e-mail]

SOYO USA

41484 Christy Street, Fremont, CA
94538

Region Covered: US and Canada
Web Site: www.soyousa.com,

www.soyo.com

Sales:

Email : [e-mail]

Technical Support:

Support Web Site:

www.soyousa.com/support.htm

SOYO (U.K.) LTD.

Unit 7, Alice Way, Hounslow Business
Park,
Hanworth Road, Hounslow, TW3 3UD

Region Covered: United Kingdom and
Republic of Ireland

Web Site: www.soyo.co.uk

Sales:

Tel : [phone]
Fax: [phone]
E-mail: [e-mail]

Technical Support:

Tel : [phone]
Fax: [phone]
E-Mail: [e-mail]

SY-K7VLM

19

Quick Start Guide

SOYO Deutschland GmbH

August-Wilhelm-Kuhnholz-Str. 15
D-26135 Oldenburg

Region Covered: Germany
Web Site: www.saat.de, www.soyo-

saat.com, www.soyo-saat.de

Vertrieb Mainboards, Notebooks und
SoyoCom Produkte:

E-Mail: [e-mail]
Fon: +49-(0)441/20910-31/33
Fax: [phone]

Technischer Support:

E-Mail: [e-mail]
Fon: +49-(0)441/20910-40
Fax: [phone]

SOYO KOREA

Region Covered: Korea

Sales:

Tel : [phone]
Fax : [phone]
E-mail : [e-mail]

Technical Support:

tel : [phone]
fax : [phone]
e-mail : [e-mail]

Web site: www.soyo.co.kr

SOYO Hong Kong

Region Covered: Hong Kong
Web Site: www.soyo.com.hk

Sales:

tel: [phone]
fax: [phone]
E-mail: [e-mail]

Technical Support:

tel: [phone]
fax: [phone]
E-mail: [e-mail]

SOYO China (Gin Mei Jei)

Region Covered: All of China

Sales:

Tel: [phone]
fax: [phone]
E-mail: [e-mail]

Technical Support:

Tel: [phone]
fax: [phone]
E-mail: [e-mail]

SOYO Japan

Region Covered: Japan
Web site: www.soyo.co.jp

Sales:

Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Technical Support:

Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Edition: January 2001

Version 1.0

SY- K7VLM-B

SERIAL