SOYO M17GS User Manual

17.0 TFT Active Matrix LCD Panel User Manual
Getting Start
Table of content.................................................................................................................................1
View of Monitor..................................................................................................................................2
Unpacking .........................................................................................................................................3
Warning.............................................................................................................................................3
Hardware Installation Step by Step....................................................................................................5
Key introduction.................................................................................................................................6
Cleaning Notices...............................................................................................................................7
Precaution.........................................................................................................................................7
Troubleshooting.................................................................................................................................7
OSD (On-Screen Display) Menu Mode ..........................................................................................8-9
Display Mode...................................................................................................................................10
Specification...............................................................................................................................10-11
All Information in this manual may change from time to time without prior notice.
English
1
17.0 TFT Active Matrix LCD Panel User Manual
View of Monitor
English
2
17.0 TFT Active Matrix LCD Panel User Manual
Unpacking
Our 17” LCD monitor shall be content with these following items. Make sure you get all these set
ready, otherwise contact to your dealer or store which you purchased it. At last, feel free to
contact us.
17” TFT LCD Monitor
External Univ15 pin D-sub
(RGB Analog) input signal
cable
ADAPTER TECH.
External Universal AC
Adaptor STD-1203
(100-240V, 50/60Hz)
CD User’s manual
DVI cord *
* DVI function is optional.
Power Cord
Audio
connector :
stereo Phone
Jack
Quick Start Guide
Warning
1. Make sure that the system power is turned off.
2. Plug the signal cable to the signal connector at the rear of PC.
3. Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to
the adapter.
4. Connect the power cord to power source.
5. Turn on the computer and the monitor.
6. For the best quality of the performance, we suggest you to set resolution as page 10
(Display Mode).
English
3
17.0 TFT Active Matrix LCD Panel User Manual
Hardware Installation
Be carefully to your LCD monitor, it’s very exquisite but easy to broken. Turn off LCD’s and PC’s
power before you set it up. Follow our installation step by step.
Input
1DC portThis is for connecting the power cable. 2PC In : This can be connected with the D-Sub 15 pin signal Cable. 3LINE inThis can be connected to the audio-out connector of any sound resource. 4DVI port : This can be connected with the DVI signal Cable. 5Earphone jack : This is for connecting the earphone.
English
4
17.0 TFT Active Matrix LCD Panel User Manual
Hardware Installation Step by Step
1. Turn your LCD opposite carefully which can see all the connection port.
2. Inset the signal cable such as RGB analog (standard) to its own port, and the other side connects to computer.
3. Inset the Audio connector to its own port, and the other side connects to computer line out.
4. Put AC Adaptor and Power Cord together.
5. Inset the DC cable to its own port (DC in), and the other side connect to socket.
6. Congratulations you had done with it. You can enjoy the excellent performance.
English
5
17.0 TFT Active Matrix LCD Panel User Manual
Monitor Adjusting
Menu control button
Key introduction
Power: Turn the LCD power on and off. When the power is on, the light is showing green,
stand by will be orange.
OSD Menu: Press the button to OSD menu, menu right adjustment.
Auto Tune: Auto adjust, menu left adjustment.
Decrease < - >: Decrease the option value in the OSD menu.
Increase < + >: Increase the option value in the OSD menu.
English
6
17.0 TFT Active Matrix LCD Panel User Manual
Cleaning Notice
1. Be gentle to clean the screen.
2. Never, ever, using any kind of corrosiveness chemical dissolvent to clean the screen, it
may hurt your screen surface.
3. We suggest that using a clean camel hair brush or a soft, clean, lint-free cloth to wipe
the screen.
4. Don’t give any pressure directly to the LCD
Precaution
1. Do not expose the monitor to direct sunlight or heat.
2. Do not spill liquid on the monitor.
3. Do not attempt to open the monitor. You may be hurt by electric shock. For service, call
your place of purchase.
4. Do not use your monitor when magnets or electronic products are operating nearby.
5. Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen.
Wipe it with clean, soft clothes applied with mild solution.
6. Do not place anything on your monitor. Bad ventilation may elevate temperature in the
monitor.
7. Don’t use your fingers to touch the LCD Screen, directly. Fingerprint that contains oil and may by difficult to clear.
Troubleshooting
Make sure that your monitor is properly installed if you have encountered any trouble using this product. ˙ There is no picture on the screen.
Check:
1. Power saving mode. Press any key and move the mouse to deactivate the mode.
2. Signal cable connector pins. If there are bent or missing pins, consult your place of purchase.
˙ Characters look too dark or too light
Check:
1. Using OSD Menu to adjust the Brightness.
˙ When your monitor shall be Adjusted?
Check:
1. If the resolution of frequency is being changed.
. The Text appears on the screen are unclear.
Check
1. Make sure the resolution or refresh rate match with the Display Mode.
English
7
17.0 TFT Active Matrix LCD Panel User Manual
OSD (On-Screen Display) Menu Mode
Option select
1. Press the OSD button to access menu.
2. Using Auto Tune for left adjustment.
3. Press OSD again for right adjustment.
Brightness:
Adjust the
brightness of the
Adjust the phase
Horizontal
Position
Adjust the horizontal
position of the
display.
Phase
of PLL.
display.
Main menu brightness adjust
Main menu phase adjust
Main menu H position adjust
Contrast
Adjust the
difference between
light and dark area.
Adjust the
frequency of the
Vertical Position Adjust the vertical
position of
Clock
PLL.
display.
Main menu contrast adjust
Main menu clock adjust
Main menu V position adjust
Reset :
Recall the default
setting.
Color Temp :
Adjust the color
Temperature.
Main menu Reset
Language :
Language
support.
English
Miscellaneous :
Main menu language adjust
Main menu color temp. adjust
8
17.0 TFT Active Matrix LCD Panel User Manual
EXIT :
Saving and
Leave.
Main menu EXIT adjust
Miscellaneous
Return :
Return to main
menu.
Vertical
Position
Adjust the
vertical position
of the OSD.
Return
OSD V position adjust
OSD.
Horizontal
Position Adjust the
horizontal
position of the
OSD Duration Adjust the timing
of the OSD menu.
OSD H position adjust
OSD duration adjust
Auto color
Adjust the color
automatically.
Volume :
Adjust of
Auto color adjust
speaker.
Menu Volume adjust
English
9
17.0 TFT Active Matrix LCD Panel User Manual
DISPLAY MODE
Incoming Display Mode
Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz)
640X350 31.475 70.100
640X480 31.469 59.940
640X480 37.500 75.000
720X400 31.469 70.087
800X600 37.879 60.317
800X600 46.875 75.000
1024X768 48.363 60.004
1024X768 60.023 75.029
1280X1024
1280X1024
1. We offer you 8 available modes compatible with Windows.
2. If any interference occurs on your screen while you modulating your PC or OSD. It is normal.
3. To have Best quality present on the PC, remember to upgrade your video card Driver. We strongly recommend you to choose a Mode listed in the table.
4. The other Modes may not be supported that are not list on the table above
5. You may use the power management on your computer. It’s good for last service life of the product.
63.981 60.020
79.976 75.024
Specification
LCD Panel Type
Viewing Angle Contrast Ratio Brightness Response Time(Tr+Tf) Display Colors Max Resolution Pixel Pitch
Input Signals RGB Analog
DVI* Compatibility PC Up to 1280X1024@75Hz(Non-interlaced) Connector RGB Analog
Audio
Power Power Voltage
Consumption
Power saving mode Internal Speaker 2Wx2(Stereo)
User Interface LED Indicator
Operating Condition Temperature
Air Humidity Dimensions (W x H x D)
Physical 377.8mm(W) x 385.9mm(H) x 53.5mm(D)
17.0” TFT Active Matrix LCD Display H:140° , V:140° 450 : 1 (Typical) 260 cd/m (14+2) 16 ms
16.7M colors(True color) 1280X1024(SXGA)
0.264mm(H)x0.264mm(V) Video Level:0.7Vp-p(75Ω) Sync TTL with 75 internal pull-up resistors Frequency FH:30~79KHz FV:56~75Hz Support digital RGB signal with TMDS signaling type
D-sub 15-pins Stereo Phone Jack, RCA-Jack(L/R)* 12V/DC Power Jack
100-240V, 50/60Hz(universal) via external AC Adapter Active < 48 Watt Max Standby < 3 Watt
Active - Green
Standby - Orange Off - Turn off
5°C~40°C 20% ~ 80% R.H.
2
(Typical)
English
10
17.0 TFT Active Matrix LCD Panel User Manual
Net Weight 4.0 Kg DDC DDC1/DDC2B Compliant
Power Management VESA DPMS, EPA Energy Star Regulation
CE, FCC, VCCI, UL/CUL,BSMI (Certifications)
* DVI function is optional.
English
11
Loading...