Southbend Range BGMTS-30 Owner’s Manual

OWNER'S MANUAL
INSTALLATION USER'S GUIDE
GAS SKILLET
BGMTS-30 & 40
These instructions should be read thoroughly before attempting installation. Set up. installation and Performance Check should be performed by a qualified service technician. The Manufacturer, Southbend (1100 Old Honeycutt Rd.. Fuquay-Varina, North Carolina 27526), informs you that unless the installation instructions for the above described Southbend product are followed and performed by a qualified service technician, (a person experienced in and knowledgeable concerning the installation of commercial gas and/or electrical cooking equipment) then the terms and conditions of the Manufacturer's Limited Warranty will be rendered void and no warranty of any kind shall apply.
If the equipment has been changed, altered, modified or repaired by other than a qualified service technician during or after the 12-month limited warranty period, then the manufacturer shall not be liable for any incidental or consequential damages to any person or to any property which may result from the use of the equipment thereafter. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion thereto may not apply to you.
In the event you have any question concerning the installation, use. care, or service of the product, write Customer Service Department. Southbend Corporation. 1100 Old Honeycutt Rd.. Fuquay-Varina. North Carolina 27526.
IMPORTANT NOTES FOR INSTALLATION AND OPERATION WARNING
FOR YOUR SAFEIY
DO
NOT STORE OR
USE
GASOLINE OR OTHER
FLAMMABLE VAPOURS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY
INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THAT THE
TH
IS APPLIANCE SMELLS GAS MUST BE POSTED IN A PROMINENT
FAILURE.
ADEQUATE CLEARANCES MUST BE MAINT
AINED FOR SAFE AND
OPERATION.
THE APPLIANCE AREA MUST BE KEPT FREE AND CLEAR OF
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR
MAINTENANCE CAN CAU
SE PROPERTY DAMAGE, INJURY OR DEATH.
THE INSTALLATION. OPERATING AND MAINTENANCE INSTRUCTIONS
OTHER APPLIANCE.
LOCATION. THIS INFORMATION SHALL BE OBTAINED BY THE LOCAL GAS SUPPLIER.
IMPORTANT
DO NOT ATTEMPT TO OPERATE THIS UNIT IN THE EVENT OF POWER
COMBUSTIBLES. DO NOT OBSTRUCT THE FLOW OF COMBUSTION AND
VENTILATION AIR.
WARNING
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT
CONTACT THE FACTORY, THE FACTORY REPRESENTATIVE OR A SERVICE COMPANY TO PERFORM MAINTENANCE AND REPAIRS
APPLIANCE MALFUNCTION. REFER TO WARRANTY TERMS.
-2-
Installation and Operation of Gas Skillets
It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This manual should be retained for future reference.
INDEX
DESCRIPTION PAGE IMPORTANT NOTES 2
INDEX 3 INSTALLATION AND SERVICE CONNECTIONS 4-5 INSTALLATION INSTRUCTIONS 5 OPERATION INSTRUCTIONS 6 PERIODIC MAINTENANCE. 7 OPERATION OF HYDRAULIC POWER UNIT 8
-3-
Loading...
+ 5 hidden pages