Standard Features
- Welded stainless steel tank with an extra smooth peened
nish to ensure easy cleaning
- Stainless steel cabinet door and front panel
- Galvanized cabinet side and rear panels
- Tube-type fry pot permits over 50% more heat to be
transferred to the fat.
- Quick recovery is provided to eliminate waiting between
loads.
- Large cold zone captures food particles, reduces avor
transfer and extends oil life.
- Wide spacing between tubes - permits easy access for
cleaning.
- 1-1/4” full port, front drain valve - allows for quick draining.
- Single unit combination gas shutoff valve, pressure
regulator and pilot system.
- 100% safety shutoff.
- 3/4” rear gas connection.
- Available Natural or Propane
- Includes two twin plated wire mesh fry baskets with plasticcoated handles, one plated tube rack, one drain extension,
removable basket hanger and 6” (15.2 cm) adjustable legs.
SB Economy GaS FryEr
SB35S - 35lb Fryer
SB45S - 45lb Fryer
SB65S - 65lb Fryer
Job Item#
Model shown SB35S
STANDARD CONSTRUCTION SPECIFICATIONS
Construction:
Welded tank with an extra smooth peened nish ensures
easy cleaning.
Long-lasting, high-temperature alloy stainless steel heat
bafes are mounted in the heat exchanger tubes to provide
maximum heating and combustion efciency.
Standing pilot light design provides a ready ame when heat
is required.
Cabinet front and door are constructed of stainless steel with
galvanized sides and back.
Operations:
Front 1-1/4” (3.2 cm) NPT drain for quick draining.
Standing pilot and thermostat maintain temperature
automatically at the selected temperature (between 200°F
(93°C) and 400°F (190°C)).
Form SBS Rev 2 (March/2016)
www.yatesgd.com www.yatesgraphicdesign.com
Controls:
Thermostat maintains selected temperature automatically
between 200°F (93°C) and 400°F (190°C).
Integrated gas control valve acts as a manual and pilot valve,
automatic pilot valve, gas lter, pressure regulator, and automatic
main valve.
Gas control valve prevents gas ow to the main burner until pilot
is established and shuts off all gas ow automatically if the pilot
ame goes out.
Temperature limit switch safely shuts off all gas ow if the fryer
temperature exceeds the upper limit.
Printed in USA
Models:
SB35S SB45S SB65S
IN(CM)
CENTI
J
H
L
K
M
A
B
G
F
D
C
Q
P
Shipping Crate DimenSionS & Weight
modEl
SB35S
SB45S
SB65S
WEiGht
lbs(kg)
161
(73.0)
181
(82.1)
226
(102.5)
N
O
SizE
ft3(m3)
17
(.48)
17
(.48)
32.5
(.9)
moDel A B C D E F G H J K L M N O P Q
SB35S
SB45S46(116.8)34(86.4)
SB65S
46-1/8
(117.1)34(86.4)
17-3/4
(45.1)
15-3/8
(39.1)
17-13/16
(45.3)
22-9/32
(56.6)
2-1/4
(5.7)6(15.2)
2-1/4
(5.7)6(15.2)
10-31/32
(27.8)
9-5/32
(23.3)
30-9/32
(76.9)
34-7/16
(87.5)
43-11/16
(111.0)14(35.6)14(35.6)
53-1/8
(134.9)18(45.7)18(45.7)
15-1/8
(38.4)
20-5/32
(51.2)
47-9/32
(120.1)
47-13/32
(120.4)
1-3/4
(4.4)
1-29/32
(4.8)
11-5/8
(29.5)4(10.2)
16-11/32
1-31/32
(41.5)
(5.0)
UTILITY INFORMATION
modEl # BurnErS BTU
oil capacity
(lBS)
SB35S 3 90,000 35-40 14” x 14” 2-3/4” 432 n/a
SB45S 4 122,000 42-50 14” x 14” 4” 576 n/a
SB65S 5 150,000 65-80 18” x 18” 5” 745 n/a
cookinG arEa
W x d
cookinG dEpth
hEat tranSFEr
arEa (in2)
ElEctrical
MISCELLANEOUS
- If using Flex-Hose, the I.D. should not be smaller than 3/4” and must comply with ANSI Z 21.69
- If casters are used with ex hose, a restraining device should be used to eliminate undue strain on the ex hose
- For installation on combustible oors (with 6” high legs) and adjacent to combustible walls, allow 6” clearance.
- Install under vented hood
- Check local codes for re, installation and sanitary regulations.
NOTICE:
Southbend has a policy of continuous product research and improvement. We reserve the right to change specications and product
design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment.
6” Casters
Portable Filter Unit
Form SBS Rev 2 (March/2016)
OPTIONS AND ACCESSORIES
Filter Paper
Filter Powder
INTENDED FOR COMMERCIAL USE ONLY.
Stainless Steel Splash Shield
Tank Cover
NOT FOR HOUSEHOLD USE
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
.