ElEctric countEr StEamEr
a
uto Fill, manual Drain
Compartment Pan Capacity
Model
R18A-4M 8 4 2 2
1” 2-1/2” 4” 6”
OPERATION SHALL BE BY:
Electrically heated, boiler free steam generation rated at:
10 kW for Model R18A-4M
The steam generator shall be equipped for operation on:
208 VAC, 3 Phase, 50/60 Hz *
240 VAC, 3 Phase, 50/60 Hz *
220 VAC, 3 Phase, 50/60 Hz *
-* UNIT SHALL BE FIELD CONVERTIBLE TO SINGLE PHASE AND
ALSO CONFIGURABLE TO 2/3 RATING.
6 kW for model R18A-4M
PanDepth
Job Item#
Model shown is an R18A-4M
SPECIFICATIONS:
Shall be a Southbend model R18A-4M (4 pan) counter convection
steamer with electric steam generator, c-CSA-us and NSF certied.
The steamer shall be constructed of #4 nish stainless steel type 304,
with a cooking chamber of one piece all welded type 316 stainless
steel with coved corners. The door shall have a removable inner
liner of stainless steel with full perimeter gasket seal, an outer liner
of one piece all welded stainless steel, and a positive lock and seal
mechanism. The steamer shall be provided with removable stainless
steel pan supports and 4” leveling legs.
The control housing shall be constructed of stainless steel with
full access removable panel. The controls shall include an
illuminated power switch, a pilot ready light, a pilot cook light,
“60” minute electric timer which sounds an audible sound at the
end of the cooking cycle. Steam ow to the cooking chamber
shall be interrupted when the door is opened and shall be
reactivated when door is closed. Standard features include a
de-liming port located at the rear of the unit for easy access to
allow cleaning of the generator tank, manual blow-down valve,
solid state liquid level controls and split water connections for
simple hook up to a water treatment system (included).
NOTE: DRAIN PAN PROVIDED BY OTHERS.
STANDARD FEATURES:
- Water Treatment System
- Automatic water ll system, manual drain system
- 304 stainless steel exterior
- 316 stainless steel cooking chamber with coved corners
- Heavy gauge stainless steel door with full perimeter gasket
- Positive lock and seal mechanism with spring release door
- On/Off power switch
- Ready indicator light
- Cooking indicator light
- 60 minute electromechanical timer with end of cycle audible alarm
- Removable stainless steel pan supports
- Electromechanical controls.
- 4” adjustable legs
- Water supply in “Y” strainer
OPTIONS AND ACCESSORIES:
380 VAC, 3 phase, 50/60 Hz
415 VAC, 3 phase, 50/60 Hz
380/220 VAC, 3 Phase, 50/60 Hz 4 wire
415/240 VAC, 3 Phase, 50/60 Hz 4 wire
Correctional package
Constant steam feature
120 minute timer
Drain hose kit
28” high single unit stand and double unit stacking stands
available (Contact factory for details)
*SEE REVERSE SIDE OF SPEC SHEET FOR WATER
TREATMENT SYSTEM STATEMENTS*
Form R18A-4M Rev 1 (February/2016)
www.yatesgd.com www.yatesgraphicdesign.com
Models:
– ELECTRICAL CONNECTION: ø 1 1/8” hole for electrical connection. Rating to be as specied on data plate.
R18A-4M
SERVICE CONNECTIONS
– COLD WATER: 3/8” (10 mm) O.D. tubing at 25-50 psi (170-345 kPa),
– GENERATOR WATER 3/8” (10 mm) O.D. tubing at 25-50 psi (170-345 kPa)
– DRAIN: 1” NPT
moDEl kW
R18A-4M
moDEl Pan DEPtH
R18A-4M Total Quantity of Pans 8 4 2 2 155 lbs. [70 kg]
Water quality is the major factor affecting the performance of your appliance. If you are unsure of water quality, consult a local water
treatment specialist and have the water analyzed. Your water supply must be within these general guidelines:
Total dissolved solids.......................Less than 60 PPM
Total alkalinity ................................ Less than 20 PPM
Silica ...............................................Less than 13 PPM
Chlorine .........................................Less than 1.5 PPM
pH Factor ......................................7.0 - 8.5
Water which fails to meet these standards should be treated by installation of water conditioner.
SOUTHBEND WATER TREATMENT SYSTEM MUST BE USED, FOR THIS APPLIANCE TO BE COVERED UNDER WARRANTY*
*FAILURE OR MALFUNCTION OF THIS APPLIANCE DUE TO POOR WATER QUALITY IS NOT COVERED UNDER WARRANTY.
9
6
208V 220V 240V
1 PH 3 PH 1 PH 3 PH 1 PH 3 PH 3 PH 3 PH
48.1
28.9
incHES 1” 2.5” 4” 6”
mm 25 64 102 152
27.8
N/A
ELECTRICAL CHARACTERISTICS
amPS/PHaSE
38.2
27.3
22.1
N/A
PAN CAPACITIES
WATER QUALITY STATEMENT
41.7
25.0
24.1
N/A
380V 8.4kW 415V
12.8
N/A
SHiPPing WEigHt minimum clEarancE
13.9
N/A
SIDES
BACK
0
0
Reference www.southbendnc.com for complete water treatment system warranty details and restrictions.
INTENDED FOR COMMERCIAL USE ONLY.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Form R18A-4M Rev 1 (February/2016)
NOT FOR HOUSEHOLD USE
.