Southbend P48C-CCCC, P48D-CCCC General Manual

48" Sectional Range

Full-Width Charbroiler

Standard Features

• 48"-wide sectional range with full-width charbroiler available with a standard-oven base, convection-oven base, cabinet base, or as a modular unit (for mounting on countertop, refrigerated or freezer base)

• Eight 16,000 BTU NAT (14,000 BTU LP) burners with four high/low control knobs

• Removable cast iron grates with adjustable front-to-back slope that ip over for either 1/8" or 1/4" grid width

• 600°F even surface temperature on high setting

• Stainless steel burner radiants

• 9-1/4" deep front rail

• Removable drip tray

• Stainless steel front, sides, rear and exterior bottom

• Fully insulated lining and burner box

• 1-1/4" front gas manifold and 1" rear gas connection

• 5" high stainless steel ue riser

• Free battery-design assistance

• Warranty: two years on specied operational parts and one year on labor from date of purchase

Standard Features of Oven-Base Models

• 45,000 BTU NAT (42,000 BTU LP) oven with standing pilot

• Cool-to-the-touch handle

• Porcelain enamel interior

• Oven racks (2 for standard oven, 3 for convection oven)

• “Insta-On” thermostat ranging from 175°F to 550°F

• Standard-oven interior is large enough (26" by 26-1/2") for sheet pans to t either way

• Convection-oven models have 1/2 hp, two-speed blower

Standard Features of Cabinet-Base Model

• Two 24"-wide stainless steel cabinets in base with removable doors that open from the center.

 P48N-CCCC (Modular Mount)  P48C-CCCC (Cabinet Base)  P48D-CCCC (Standard-Oven Base)  P48A-CCCC (Convection-Oven Base)

Model P48A-CCCC with optional 24" ue riser

Job Item#

STANDARD CONSTRUCTION SPECIFICATIONS

Exterior Finish: Front, sides, rear and exterior bottom

constructed of #3 polished 430 and 304 stainless steel.

Range: 48"-wide front-manifold sectional range with 128,000 BTU NAT (112,000 BTU LP) full-width charbroiler with removable cast iron grates and operating surface temperature of up to 600°F (315°C).

Front Rail: 9-1/4" deep front rail.

Flue Riser: 5" high stainless steel ue riser.

Battery: Unit can be in any position in a battery. If the unit is

at the end of the battery, the end side will be solid (rather than have a coverplate over the end of the front manifold).

Legs: 6" stainless steel adjustable legs standard.

Form P48-CCCC Rev 4 (November/2010)

www.yatesgd.com www.yatesgraphicdesign.com

Model 48D: 45,000 BTU NAT (42,000 BTU LP) oven with

standing pilot and thermostat range of 175°F to 550°F (79°C to 288°C). Porcelain enamel interior, measuring 14” high x 26” wide x 26.5” deep. Two racks with ve-position side rails. Right side cabinet.

Model 48A: 45,000 BTU NAT (42,000 BTU LP) convection oven with standing pilot and thermostat range of 175°F to 550°F (79°C to 288°C). Porcelain enamel interior, measuring 14” high x 26” wide x 24” deep. Three racks with ve-position side rails. Two-speed, 1/2 hp blower motor. Right side cabinet.

Model 48C: Two 24"-wide stainless steel cabinets in base with removable doors that open from the center.

Printed in USA

Models:

FRONT VIEW

43"

(1092)

24"

(610)

60"

(1524)

41"

(1041)

72"

(1829)

8-1/2" (216)

SIDE VIEW of MODULAR MODEL

SIDE VIEW

33-3/4"

(859)

Motor for

Convection

Oven Models

15-3/4"

(400)

36"

(914)

37-1/2"

(953)

9-1/4"

(235)

37-1/2" (953)

34" (864)

40" (1016)

43-1/2" (1105)

5" (127)

Front Gas Manifold

Optional extra-deep flue riser (cooking area is same as for models with standard flue riser).

5" Flue Riser

24" Flue Riser

36" Flue Riser

48" (1219)

6" (152)

20"

(508)

Rear Gas

Connection

18"

(457)

TOP VIEW

REAR VIEW

Oven models also have 16" cabinet,

cabinet models have two 24" cabinets.

2-1/2" (64)

Electrical

Connection

for Oven

Models

 P48N-CCCC  P48C-CCCC  P48D-CCCC  P48A-CCCC

SHIPPING CRATE DIMENSIONS & WEIGHT

MODEl WIDTH HEIGHT DEPTH VOluME WEIGHT

55"

23"

55"

P48N-CCCC

P48C-CCCC

P48D-CCCC

P48A-CCCC

Dimensions shown in inches and (millimeters)

(1397)

55"

(1397)

55"

(1397)

55"

(1397)

(584)

45"

(1143)

45"

(1143)

45"

(1143)

(1397)

55"

(1397)

55"

(1397)

55"

(1397)

40.3 cu ft

(1.14 cu m)

78.8 cu ft

(2.23 cu m)

78.8 cu ft

(2.23 cu m)

78.8 cu ft

(2.23 cu m)

276 lbs

(125.2 kg)

462 lbs

(209.6 kg)

568 lbs

(257.6 kg)

621 lbs

(281.7 kg)

UTILITY INFORMATION

GAS: Each unit has a

1-1/4" front manifold

MODEl

that couples to the adjacent sectional

P48N-CCCC 128,000 112,000 - -

unit(s), and a 1" rear gas connection with a

P48C-CCCC 128,000 112,000 - -

male NPT connector. Minimum gas supply

P48D-CCCC 173,000 154,000 0* 0*

pressure is 7" W.C. for natural gas and

P48A-CCCC 173,000 154,000 3.8* 1.6*

11" W.C. for propane. All sectional units require a regulated gas supply (a pressure regulator must be ordered separately). If using a exible-hose gas connection, the inside diameter of the hose must not be smaller than the connector on the unit and must comply with ANSI Z21.69, providing an adequate means of restraint to prevent undue strain on the gas connection.

ELECTRICITY: All oven models with optional electronic ignition require 50Hz or 60Hz single-phase power. 120V models have a 7-foot power cord with ground plug (3.8A for "A" models). 208/240V models have a terminal block for connection to a single-phase 208/240V source (1.6A for "A" models).

 External pressure regulator  Front rail options:

 Cutouts in front rail for sauce pans  7-1/4" deep front rail (to match old

style sectional)

 Square belly bar mounted on 7-1/4"

deep front rail

 Casters (front two casters lock)

GAS (BTU/HOuR) ElECTRICITy (AMPS)

NATuRAl PROPANE 120V 208/240V

*Standing Oven Pilot Models

OPTIONS and ACCESSORIES

 Cable restraint kit (to restrict

movement when on casters)

 24" or 36" high ue riser  Open-frame base with casters for

battery

 Extra-deep rear-extending ue riser  Stainless steel oven interior

MISCELLANEOUS

• If casters are used with a exible-hose gas connection, a restraining device should be used to prevent undue strain on the hose.

• Minimum clearance from noncombustible construction is zero (except there must be 2" clearance behind the blower motor of convection-oven models). Installation next to combustible construction is not recommended.

• Installation under a vented hood is recommended.

• Check local codes for re and sanitary regulations.

NOTICE:

Southbend has a policy of continuous product research and improvement. We reserve the right to change specications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

 Salamander or cheesemelter

mounted on 36" high ue riser

 Removable shelf inside cabinet  Overlapping charbroiler  Plated sh grids  Electronic oven pilot ignition  120V, NEMA 4 water resistant

controls

Form P48-CCCC Rev 4 (November/2010)

INTENDED FOR COMMERCIAL USE ONLY.

NOT FOR HOUSEHOLD USE.

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526

(919) 762-1000 www.southbendnc.com