Southbend KTPD-10 Installation Manual

southbend

KTPD

-

05

A MIDDLEBY COMPANY

OWNER'S MANUAL

INSTALLATION
USER'S GUIDE

SERVICE PARTS

TABLE KETTLE TILTING

DIRECT STEAM

MODELS:

KTPD-10

These instructions should be read thoroughly before attempting installation. Set up, installation
and Performance Check should be performed by a qualified service technician. The Manufacturer,
Southbend (1100 Old Honeycutt Rd., Fuquay-Varina, North Carolina 27526), informs you that
unless the installation instructions for the above described Southbend product are followed and
performed by a qualified service technician, (a person experienced in and knowledgeable
concerning the installation of commercial gas and/or electrical cooking equipment) then the terms
and conditions of the Manufacturer's Limited Warranty will be rendered void and no warranty of
any kind shall apply.

If the equipment has been changed, altered, modified or repaired by other than a qualified service
technician during or after the 12-month limited warranty period, then the manufacturer shall not be
liable for any incidental or consequential damages to any person or to any property which may
result from the use of the equipment thereafter. Some States do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion thereto may
not apply to you.

In the event you have any question concerning the installation, use, care, or service of the
product, write Customer Service Department. Southbend Corporation. 1100 Old Honeycutt Rd.,
Fuquay-Varina, North Carolina 27526.

TABLE KETTLE

TILTING DIRECT STEAM

(Manual Section SK)

Congratulations! You have just purchased one of the Finest pieces of heavy-duty, commercial cooking equipment on

1

2

SECTION THREE

- SERVICE

1

the market today.
You will find that your new equipment, like all Southbend equipment, has been designed and manufactured to some of

the toughest standards in the industry — those of Southbend Corporation. Each piece of Southbend equipment has
been carefully engineered and designs have been verified through laboratory tests and field installations in some of the
more strenuous commercial cooking applications. With proper care and field maintenance, you will experience years of
reliable, trouble-free operation from your Southbend equipment. To get the best results, it's important that you read this
manual carefully.

TABLE OF CONTENTS:

SECTION ONE - INSTALLATION

Specifications 1
Installation 2

SECTION TWO - USER'S GUIDE

Warranty
Operation
Maintenance 2

Service 1
Trouble Shooting. 2

SECTION FOUR - PARTS

Parts List

Retain this manual for future reference.
INTENDED FOR COMMERCIAL USE ONLY. NOT FOR

HOUSEHOLD USE.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.

KEEP AREA AROUND APPLIANCES FREE AND CLEAR FROM COMBUSTIBLES.

1100 Old Honeycutt Road

southbend

A MIDDLEBY COMPANY

Fuquay-Varina. NC 27526
[phone]
FAX [phone]
[phone]

TABLE KETTLE TILTING DIRECT STEAM

INSTALLATION

INSTALLATION

SPECIFICATIONS

KTPD-05

DIMENSIONS: ( ) = Millimeters

MODEL

KTPD-05

EXTERIOR TILT CLEARANCE KETTLE CRATE SIZE

Width A Depth

(432)

17"

B

14.25"
(362)

Height C D E F

24.5"

14.5"

6.25"

(622)

(368)

(159)

5.8"

(147)

I.D.

G

12.63"
(321)

H I

11.56"
(294)

J K L M

16"

12.5"

(406)

(318)

5.75"
(146)

8.9"

(226)

13.25"
(337)

POUR

PATH N

8.5"

(216)

Width Depth Height

20"

(508)

20"

(508)

23"

(584)

CUBIC

VOLUME

5.32 cu. ft.
.15 cu. m.

CRATED
WEIGHT

90 lbs.

40.82 kg.

KTPD-10

DIMENSIONS: ( ) = Millimeters

MODEL

KTPD-10

APPROVALS:

EXTERIOR TILT CLEARANCE

Width A Depth B Height

22.5"

17.63"

(572)

(448)

(711)

D E F I.D. G H I

C

28"

15.5"
(394)

7.5"

(190)

2.5"
(64)

KETTLE CRATE SIZE

J K L M

16"

14.2"

19.5"

(406)

(361)

20.25"

(495)

(514)

10"

(254)

11"

(279)

12.5"

(318)

POUR

PATH N

15"

(381)

Width Depth Height

24"

(610)

24"

(610)

27"

(686)

CUBIC

VOLUME

9 cu. fl .25

cu m

CRATED
WEIGHT

115 lbs 52

-5 kg.

TABLE KETTLE TILTING DIRECT STEAM
SECTION ONE — INSTALLATION
PAGE 1

INSTALLATION

THESE PROCEDURES MUST BE FOLLOWED BY QUALIFIED PERSONNEL OR WARRANTY

WILL BE VOIDED.

INSTALLATION

WARNING:

NOTE: Recommended Piping Connections

Piping & Accessories Furnished By Customer
Maximum Steam Pressure 45 psi
Minimum Flow Rate 20 lbs. Dry Steam Per Hour

INSTALLATION:

1. Place the kettle in the desired location. Be sure to leave enough space around the kettle for tilting, cleaning and service.
Check that the drain lip of the kettle will empty into a proper waste drain.

2. Install controls and piping as recommended. The safety valve must be set to relieve at 45 psi or less.

CAUTION:

TABLE KETTLE TILTING DIRECT STEAM
SECTION ONE — INSTALLATION
PAGE 2

IF YOUR STEAM SUPPLY PRESSURE IS GREATER THAN 45 PSI, A PRESSURE REDUCING VALVE
MUST BE INSTALLED UPSTREAM OF THE SAFETY VALVE.

Litho in U S A

6-88