Southbend KSLG-100 User Manual

Gas steam

K

ettle stationary

Model CapaCity

KSLG-80 80 Gallon 303 Liter

KSLG-100 100 Gallon 379 Liter

OPERATION SHALL BE BY:

 Natural Gas
 L.P. Gas

For operation on 115 VAC, 1 phase 50/60 Hz, A.S.M.E. code
stamped for operation up to 35 psi (241 kPa). The steam
kettle temperature ranges shall be between 165°F to 265°F
(74°C to 130°C).

Job Item#

SPECIFICATIONS:

Shall be a Southbend Model ____________________________,

gas red, self-contained, fully insulated steam jacketed kettle,

ASME Code stamped, National Board Registered, AGA and CGA

design certied, NSF approved. The unit comes standard with
a spring assisted cover. The kettle shall be constructed with an
exterior of type 304 stainless steel, #4 sanitary nish and four 6”
stainless steel adjustable legs. The interior kettle liner shall be
a one piece welded construction made with type 304 stainless
steel with #4 sanitary nish, 2/3 jacketed and shall be furnished
with a 2” tangent draw off valve with strainer as standard. The
recessed control panel is located on the front side of the unit in
full view of the operator and is easy to use. Standard controls
include electronic ignition, direct immersion thermostat, water
sight glass, cooking light, pressure gauge and low water indicator
light. Safety features shall include a low water cut off, pressure
relief valve, pressure switch and a safety gas shutoff valve.

A double wall kettle interior shall form a steam jacket around
the lower 2/3 of the kettle. The bottom of the kettle shall be of
hemispherical design for superior heat circulation.

Convenience features shall include 2” (50 mm) sanitary draw­off valve with a heat resistant handle. Faucet bracket included.

OPTIONAL ITEMS AT EXTRA COST:

 316 stainless steel liner for interior
 208-240 VAC operation (specify voltage)
 3” (76 mm) draw-off valve (TVT-3) with

perforated strainer (TPS-)

 2” (50 mm) dairy valve (DDO-2T)
 3” (76 mm) dairy valve (DDO-3T)
 Etched gallon markings (GM-)
 Etched liter markings (LM-)
 Correctional Package

ACCESSORIES:

 Single pantry faucet with swing spout, SF-12
 Double pantry faucet with swing spout, DF-12
 Stainless steel tri basket, (TBA-)
 Solid disc for draw-off valve (TSS-)
 Graduated measuring strip (CMS-)
 Strainer hook (SH-)
 Draw-off valve hose kit (DVHK-2)
 Perforated strainer for draw-off valve (TPS-)
 Casters

Form KSLG80-100 Rev 2 (March/2015)

www.yatesgd.com www.yatesgraphicdesign.com

Printed in USA

Models:

 KSLG-80  KSLG-100

KSLG-100

KSLG-80

Model Shipping Weight

KSLG-80 950 lbs. [430 kg]

KSLG-100 1100 lbs. [498 kg]

KSLG-80

KSLG-100

KSLG-80

KSLG-100

SERVICE CONNECTIONS

– Supply gas through 3/4” pipe. A gas shut-off valve must be installed in supply piping convenient and adjacent to appliance

– Unless other wise specied, Field Wire Electrical Connection to be 120 Volts, 60 Hertz, single phase with grounding wire. Unit furnished

with 6’ cord and 3 prong plug. Total maximum amps 2.0.

Model

Btu/hr. kW/HR. Supply pipe preSSure (W.C.)

KSLG-80 150,000 44.0

KSLG-100 150,000 44.0 Back 2” [51 mm]

gaS Supply

Natural

6”-14” (152-355 mm)

Propane

11”-14” (279-355 mm)

MiniMuM ClearanCe *

Sides 6” [152 mm]

* For use on non-combustible oors only.

Form KSLG80-100 Rev 2 (March/2015)

INTENDED FOR COMMERCIAL USE ONLY.

NOT FOR HOUSEHOLD USE

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526

[phone] www.southbendnc.com

.