Southbend KEMTL-100-2 User Manual

Not exactly as shown
ElEctric lEg-MountEd
twin tilting MixEr KEttlEs
Job Item#
Model CapaCity
KEMTL-40-2 2 x 40 Gallon 2 x 152 Liter
KEMTL-60-2 2 x 60 Gallon 2 x 227 Liter
KEMTL-80-2 2 x 80 Gallon 2 x 303 Liter
KEMTL-100-2 2 x 100 Gallon 2 x 380 Liter
OPERATION SHALL BE BY:
Electrically, self-generating closed steam system equipped for operation on:
208 Volts, 3 Phase, 60 Hz
240 Volts, 3 Phase, 60 Hz
Shall be a Southbend Model ________________________, self-generating, twin electric kettle. Construction shall be welded stainless steel type 304 satin nish. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispheric design for maximum heat transfer. The tubular legs shall be constructed of stainless steel pipe tted with four hole, adjustable, anged feet for securing to the oor. A sealed stainless steel tilt mechanism shall permit the kettle to tilt forward a full 90° for complete emptying. The tilt mechanism shall be self locking for positive stop action.
Kettle controls shall include a power switch, thermostat, power “on” light (pilot light) vacuum/pressure gauge, pressure relief valve and low water shut off. Thermostat range to be 140°F to 285°F (60°C to 140°C), a maximum pressure of 50 psi (345 kPa). Electric elements to be removable.
MIXER FEATURES:
The mixer is a variable speed unit powered by a 5 hp electric motor driving a hydraulic pump. Two agitators shall be included, a primary stainless steel scraper/agitator, and a secondary high speed mixer. Both agitators shall be removable for cleaning and no tools will be required for removal.
The console front to have the main power switch, mixer lift switch and variable speed control.
The bridge is constructed of 10 gauge stainless steel and contains two heavy duty hydraulic motors to drive the agitators. The bridge shall be power tilt, and swing 140° out of the way for kettle tilting or cleaning.
OPTIONAL ITEMS AT EXTRA COST:
Swing faucet on left or right console
3" manual buttery valve
2" manual buttery valve
316 stainless steel liner for high acid content
products
33 KW elements
380 or 415 VAC, 50 Hz, 3 Phase
440, 460 or 480 VAC, 60 Hz, 3 Phase
575 or 600 VAC, 60 Hz, 3 Phase (not UL)
Form KEMTL-2 Rev 1 (November/2010)
www.yatesgd.com www.yatesgraphicdesign.com
Models:
KEMTL-40-2 KEMTL-60-2 KEMTL-80-2 KEMTL-100-2
SERVICE CONNECTIONS
– COLD WATER: 3/8” (10mm) nominal tubing to kettle ll faucet (Optional)
– ELECTRICAL CONNECTION: As specied by data plate
DIMENSIONS
Model CapaCity Units a B C d e F G
KEMTL-40-2
KEMTL-60-2
KEMTL-80-2
KEMTL-100-2
40 Gal Each
(151 liters)
60 Gal Each
(227 liters)
80 Gal Each
(303 liters)
100 Gal Each
(380 liters)
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
26”
(660)
29.5” (749)
33”
(838)
35.5” (902)
102”
(2591)
108”
(2743)
116”
(2946)
121”
(3073)
45.5”
(1156)
49”
(1245)
49”
(1245)
49”
(1245)
55”
(1397)
58.5”
(1486)
58.5”
(1486)
58.5”
(1486)
75.63” (1921)
80”
(2032)
80”
(2032)
85”
(2159)
15.13” (384)
19.5” (495)
19.5” (495)
19.5” (495)
ELECTRICAL CHARACTERISTICS
Model
KEMTL-40-2 KEMTL-60-2 KEMTL-80-2
KEMTL-100-2
kW aMp kW aMp kW aMp
24 147.2 24 129.6 24 64.8
33 197.4 33 172.8 33 86.4
208V 240V 480V
56”
(1422)
58”
(1473)
60”
(1524)
63”
(1600)
Form KEMTL-2 Rev 1 (November/2010)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Loading...