Southbend KEMTL-100 User Manual

ElEctric lEg-MountEd

t

ilting MixEr KEttlE

Model CapaCity

KEMTL-40 40 Gallon 152 Liter

KEMTL-60 60 Gallon 227 Liter

KEMTL-80 80 Gallon 303 Liter

KEMTL-100 100 Gallon 380 Liter

OPERATION SHALL BE BY:

Electrically, self-generating closed steam system
equipped for operation on:

 208 Volts, 3 Phase, 60 Hz
 240 Volts, 3 Phase, 60 Hz

OPTIONAL ITEMS AT EXTRA COST:

Job Item#

SPECIFICATIONS:

Shall be a Southbend Model _________________________,
self-generating, electric kettle. Construction shall be welded

stainless steel type 304 satin nish. A double wall kettle interior

shall form a steam jacket around the lower 2/3 of the kettle. The
bottom of the kettle shall be of hemispheric design for maximum
heat transfer. The tubular legs shall be constructed of stainless

steel pipe tted with four hole adjustable anged feet for securing
to the oor. A sealed stainless steel tilt mechanism shall permit

the kettle to tilt forward a full 90° for complete emptying. The tilt
mechanism shall be self locking for positive stop action.

MIXER FEATURES:

The mixer is a variable speed unit powered by a 5 hp electric
motor driving a hydraulic pump. Two agitators shall be included,
a primary stainless steel scraper/agitator, and a secondary high
speed mixer. Both agitators shall be removable for cleaning and
no tools will be required for removal.

The console front to have the main power switch, mixer lift switch
and variable speed control.

The bridge is constructed of 10 gauge stainless steel and
contains two heavy duty hydraulic motors to drive the agitators.
The bridge shall be power tilt, and swing 140° out of the way for
kettle tilting or cleaning.

Kettle controls shall include a power switch, indicator light,
vacuum/pressure gauge, pressure relief valve and low water
shut off. Thermostat range to be 140°F to 285°F (60°C to 140°C),
a maximum pressure of 50 psi (345 kPa). Electric elements to
be removable.

 Swing faucet on left console
 3" manual buttery valve
 2" manual buttery valve
 316 stainless steel liner for high acid content

products

 33 KW elements
 380 or 415 VAC, 50 Hz, 3 Phase
 440, 460 or 480 VAC, 60 Hz, 3 Phase
 575 or 600 VAC, 60 Hz, 3 Phase (not UL)

Form KEMTL Rev 2 (March/2015)

www.yatesgd.com www.yatesgraphicdesign.com

Models:

 KEMTL-40  KEMTL-60  KEMTL-80  KEMTL-100

SERVICE CONNECTIONS

– COLD WATER: 3/8” (10mm) nominal tubing to kettle ll faucet (Optional)

– ELECTRICAL CONNECTION: As specied by data plate

DIMENSIONS

Model CapaCity Units a B C d e F G

KEMTL-40

KEMTL-60

KEMTL-80

KEMTL-100

40 Gallons
(151 liters)
60 Gallons
(227 liters)
80 Gallons
(303 liters)

100 Gallons

(380 liters)

inches

(mm)

inches

(mm)

inches

(mm)

inches

(mm)

26”

(660)

29.5”
(749)

33”

(838)

35.5”
(902)

62.25”
(1581)

66”

(1676)

69.25”
(1759)

71.5”

(1816)

45.5”

(1156)

49”

(1245)

49”

(1245)

49”

(1245)

55”

(1397)

58.5”

(1486)

58.5”

(1486)

58.5”

(1486)

75.63”
(1921)

80”

(2032)

80”

(2032)

85”

(2159)

15.13”
(384)

19.5”
(495)

19.5”
(495)

19.5”
(495)

ELECTRICAL CHARACTERISTICS

availaBle kW

odel Standard optional

M

KELT-40 24 N/A

KELT-60 24 33

KELT-80 24 33

KELT-100 24 33

W phase 208v 220v 240v 380v 415v 480v 600v

k

24 3 79.6 75.3 69.0 43.6 39.9 34.6 27.6

33 3 104.6 98.9 90.7 57.2 52.4 44.2 36.3

aMps per line

56”

(1422)

58”

(1473)

60”

(1524)

63”

(1600)

Form KEMTL Rev 2 (March/2015)

INTENDED FOR COMMERCIAL USE ONLY.

NOT FOR HOUSEHOLD USE

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526

[phone] www.southbendnc.com

.