Southbend KDMTL-100 General Manual
Direct Steam Leg-mounteD
tiLting mixer KettLe
Model CapaCity
KDMTL-40 40 Gallon 152 Liter
KDMTL-60 60 Gallon 227 Liter
KDMTL-80 80 Gallon 303 Liter
KDMTL-100 100 Gallon 380 Liter
OPERATION SHALL BE BY:
Direct steam. Hydraulic power supply is standard
either:
208 Volts, 3 Phase, 60 Hz
240 Volts, 3 Phase, 60 Hz
Job Item#
SPECIFICATIONS:
Shall be a Southbend Model _________________________,
direct steam tilting kettle operating at a maximum of 35 psi.
Construction shall be welded stainless steel type 304 satin nish.
A double wall kettle interior shall form a steam jacket around
the lower 2/3 of the kettle. The bottom of the kettle shall be of
hemispheric design for maximum heat transfer. The tubular
legs shall be constructed of stainless steel pipe tted with four
hole, adjustable, anged feet for securing to the oor. A sealed
stainless steel tilt mechanism shall permit the kettle to tilt forward
a full 90° for complete emptying. The tilt mechanism shall be
self locking for positive stop action.
MIXER FEATURES:
The mixer is a variable speed unit powered by a 5 hp electric
motor driving a hydraulic pump. Two agitators shall be included,
a primary stainless steel scraper/agitator, and a secondary high
speed mixer. Both agitators shall be removable for cleaning and
no tools will be required for removal.
The console front to have the main power switch, mixer lift switch
and variable speed control.
The bridge is constructed of 10 gauge stainless steel and
contains two heavy duty hydraulic motors to drive the agitators.
The bridge shall be power tilt, and swing 140° out of the way for
kettle tilting or cleaning.
OPTIONAL ITEMS AT EXTRA COST:
Swing faucet on left console
3" manual buttery valve
2" manual buttery valve
316 stainless steel liner for high acid content
products
480 VAC, 60 Hz, 3 Phase (for motor)
Quick chill system
Steam control assembly (STA-)
High pressure operation (HP-50)
Form KDMTL Rev 0 (November/2010)
www.yatesgd.com www.yatesgraphicdesign.com
Models:
KDMTL-40 KDMTL-60 KDMTL-80 KDMTL-100
SERVICE CONNECTIONS
EC - ELECTRICAL CONNECTION: As specied by data plate
S - STEAM SUPPLY: 3/4” IPS (19 mm)
CW - COLD WATER: 3/8” (10 mm) nominal tubing to kettle ll faucet (OPTIONAL)
CR - CONDENSATE RETURN: 1/2” IPS (13 mm)
DIMENSIONS
Model CapaCity Units a B C d e F G
KDMTL-40
KDMTL-60
KDMTL-80
KDMTL-100
40 Gallons
(152 liters)
60 Gallons
(227 liters)
80 Gallons
(303 liters)
100 Gallons
(380 liters)
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
26”
(660)
29.5”
(749)
33”
(838)
35.5”
(902)
62”
(1575)
65”
(1651)
67.75”
(1721)
70”
(1778)
45.5”
(1156)
49”
(1245)
49”
(1245)
49”
(1245)
55”
(1397)
58.5”
(1486)
58.5”
(1486)
58.5”
(1486)
75.63”
(1921)
80”
(2032)
80”
(2032)
85”
(2159)
15.13”
(384)
19.5”
(495)
19.5”
(495)
19.5”
(495)
ELECTRICAL CHARACTERISTICS
Model
KDMTL-40
KDMTL-60
KDMTL-80
KDMTL-100
208V 240V 480V
14.0 14.0 7.0
aMps per line
56”
(1422)
58”
(1473)
60”
(1524)
63”
(1600)
Form KDMTL Rev 0 (November/2010)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Loading...