Southbend KDLT-20, KDLT-30, KDLT-40, KDLT-60, KDLT-80 General Manual
SPECIFICATIONS:
Shall be a Southbend Model __________________________,
direct steam connected tri-leg tilting kettle. A double wall kettle
interior shall form a steam jacket around the lower 2/3 of the
kettle. The bottom of the kettle shall be of hemispherical design
for superior heat circulation.
The tri-leg mounting frame of stainless steel pipe shall support
the kettle and tilt console, conceal the steam piping and house
the steam control valve and tilt mechanism. Each leg shall be
tted with a 4 hole adjustable anged foot for securing to the
oor. The tilt mechanism shall permit the kettle to tilt forward a
full 90° for complete emptying. The tilting mechanism shall be
self locking for positive stop action.
Construction shall be all welded #4 nish stainless steel type
304. The interior liner on 20, 30 and 40 gallon models shall be
standard 316 for high acid content cooking.
Direct Steam
tri-Leg tiLting KettLe
Job Item#
Model CapaCity
KDLT-20 20 Gallon 76 Liter
KDLT-30 30 Gallon 114 Liter
KDLT-40 40 Gallon 151 Liter
KDLT-60 60 Gallon 227 Liter
KDLT-80 80 Gallon 303 Liter
KDLT-100 100 Gallon 379 Liter
OPERATION SHALL BE BY:
Direct steam at a minimum of 5 PSI (34kPa) and a
maximum of 35 PSI (241kPa).
OPTIONAL ITEMS AT EXTRA COST:
Type 316 stainless steel liner for high acid content
cooking for 60, 80 and 100 gallon models
50 PSI (345kPa) high pressure operation for higher
cooking temperature
1-1/2" (38 mm) draw-off valve (TVT-1)
2" (50 mm) draw off-valve (TVT-2)
3" (76 mm) draw off-valve (TVT-3)
2" (50 mm) dairy valve (DDO-2T)
3" (76 mm) dairy valve (DDO-3T)
Spring assist hinged cover for 20, 30 or 40 gallon
models (CH-)
Etched gallon markings (GM-)
Etched litre markings(LM-)
ACCESSORIES:
One piece lift off cover (C-)
Triple basket assembly (TBA-)
Steam trap assembly consisting of steam trap, steam
control valve, check valve and line strainer (STA-1)
Single pantry faucet with swing spout (SF-18)
Double pantry faucet with swing spout (DF-18)
Perforated strainer for draw-off valve (TPS-)
Solid stainless steel disc for draw-off valve (TSS-)
Graduated measuring strip (CMS-)
Strainer hook (SH)
Pan carrier (PC-4)
Form KDLT Rev 1 (November/2010)
www.yatesgd.com www.yatesgraphicdesign.com
Models:
KDLT-20 KDLT-30 KDLT-40 KDLT-60 KDLT-80 KDLT-100
SERVICE CONNECTIONS
– STEAM SUPPLY: 3/4” IPS (19 mm)
- CONDENSATE RETURN: 1/2” IPS (13 mm)
DIMENSIONS
Model CapaCity Units a B C d e F G H(2”) H(3”) J(2”) J(3”) K l M
KDLS-20
KDLS-30
KDLS-40
KDLS-60
KDLS-80
KDLS-100
20 gallons
(76 liters)in(mm)
30 gallons
(114 liters)in(mm)
40 gallons
(152 liters)in(mm)
60 gallons
(227 liters)in(mm)
80 gallons
(303 liters)in(mm)
100 gallons
(379 liters)in(mm)
21”
(533)
24”
(610)
26”
(660)
29.5”
(750)
33”
(840)
35.5”
(902)
18”
(460)
20”
(510)
22.5”
(570)
26”
(660)
28”
(710)
30”
(762)
37”
(940)
37”
(940)
37”
(940)
40.5”
(1029)
42.5”
(1080)
42.5”
(1080)
34.75”
(885)
37.75”
(960)
39.75”
(1010)
43.25”
(1100)
46.75”
(1085)
49.25”
(1251)
28.5”
(724)
31.5”
(800)
33.5”
(850)
37”
(940)
40.5”
(1030)
43”
(1092)
22”
(559)
20.75”
(527)
20.25”
(514)
21.5”
(546)
20”
(508)
27”
(686)
25.63”
(651)
27.13”
(689)
28.63”
(727)
30.13”
(765)
32.63”
(828)
39.25”
(997)
12”
(305)
12.5”
(317)
13”
(330)
13.75”
(350)
14.5”
(368)
18”
(457)
13.25”
(337)
14.25”
(362)
15.25”
(387)
15.5”
(394)
16.25”
(413)
20.25”
(514)
17”
(432)
15”
(381)
12.5”
(318)
14.5”
(368)
12.5”
(318)
10.5”
(267)
16.5”
(419)
14.5”
(368)
12”
(305)
14”
(356)
12”
(305)
10”
(254)
59.5”
(1512)
62.5”
(1588)
64”
(1626)
74”
(1879)
76”
(1930)
79”
(2007)
N/A
N/A
N/A
9.5”
(241)
11”
(279)
12.5”
(318)
15.38”
(391)
15.38”
(391)
16.38”
(416)
18.38”
(467)
19.88”
(505)
21.5”
(546)
Form KDLT Rev 1 (November/2010)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Loading...