A MIDDLEBY COMPANY
OWNER'S MANUAL
southbend
INSTALLATION
USER'S GUIDE
DIRECT STEAM TILTING KETTLE
MODELS: KDLT, KDPT
These instructions should be read thoroughly before attempting installation. Set up. installation and
Performance Check should be performed by a qualified service technician. The Manufacturer.
Southbend (1100 Old Honeycutt Rd.. Fuquay-Varina, North Carolina 27526), informs you that unless
the installation instructions for the above described Southbend product are followed and performed by
a qualified service technician, (a person experienced in and knowledgeable concerning the
installation of commercial gas and/or electrical cooking equipment) then the terms and conditions of
the Manufacturer's Limited Warranty will be rendered void and no warranty of any kind shall apply.
If the equipment has been changed, altered, modified or repaired by other than a qualified service
technician during or after the 12-month limited warranty period, then the manufacturer shall not be
liable for any incidental or consequential damages to any person or to any property which may result
from the use of the equipment thereafter. Some States do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion thereto may not apply to
you.
In the event you have any question concerning the installation, use, care. or service of the product,
write Customer Service Department. Southbend Corporation. 1100 Old Honeycutt Rd.. FuquayÂVarina. North Carolina 27526.
INSTALLATION AND OPERATION
MANUAL
DIRECT STEAM TILTING KETTLES
20. 30. 40. 60, 80 GALLON
southbend
A MIDDLEBY COMPANY
DLT
DPT
1100 Old Honeycutt Road
Fuquay-Varina. NC 27526
(919) 552-9161
FAX (919) 552-9798
(800) 348-2558
INSTALLATION AND OPERATION
It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This manual should
be retained for future reference.
ADEQUATE CLEARANCES MOST BE MAINTAINED FOR SAFE AND PROPER OPERATION
INDEX
DESCRIPTION
INDEX 1
INSTALLATION AND SERVICE CONNECTIONS 2
INSTALLATION INSTRUCTIONS 4
INTRODUCTION 5
OPERATION INSTRUCTIONS
CLEANING INSTRUCTION 7
TROUBLESHOOTING 8
PAGE
6