Southbend KDCT-10 User Manual

Direct Steam

counter tilting Kettle

Model CapaCity

KDCT-6 6 Gallon 23 Liter

KDCT-10 10 Gallon 38 Liter

KDCT-12 12 Gallon 45 Liter

KDCT-20 20 Gallon 76 Liter

OPERATION SHALL BE BY:

Direct steam at a minimum of 5 PSI (34 kPa) and a maximum of 50 PSI (345 kPa).

STANDARD FEATURES:

 Reversible tilt handle

 Type 316 stainless steel liner

 Steam control valve

Job Item#

DC-6 shown.

SPECIFICATIONS:

Shall be a Model ________________________________, direct connected, steam, counter top tilting kettle. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispheric design for superior heat transfer.

The tubular stainless steel mounting legs shall have the tilt bearings, steam supply and condensate return pipes completely concealed within the leg members and the right leg will be tted with a steam control valve. A single support leg with nylon foot shall support the kettle in the upright position. The sealed stainless steel tilt mechanism bearings shall permit the kettle to tilt forward past 90° for complete emptying. A removable operating handle with heat-proof knob shall be mounted on the left or right. Construction shall be all welded satin nish stainless steel, type 304. Standard features include type 316 stainless steel liner for use with high acid content products. The kettle shall be NSF Certied, ASME code stamped and National Board registered.

OPTIONAL ITEMS AT EXTRA COST:

 Etched gallon markings (GM-)

 Etched liter markings (LM-)

 24” wide oor stand with sliding shelf (KEDC-24)

 36” wide oor stand with sliding shelf (KEDC-36)

 30” wide oor stand with sliding drain pan (KEDC-30SD)

 Correctional Package

ACCESSORIES:

 One piece lift off stainless steel cover (C-)

 Stainless steel perforated basket (SSB-)

 Pour lip strainer (TKS-)

 Steam control assembly (STA-3) consisting of line strainer,

steam trap and safety valve

 Contoured measuring strip (CMS-)

 Pressure reducing valve (PRV)

Form KDCT Rev 1 (November/2010)

www.yatesgd.com www.yatesgraphicdesign.com

Models:

 KDCT-6  KDCT-10  KDCT-12  KDCT-20

DC-20

SERVICE CONNECTIONS

– STEAM SUPPLY” 1/2” IPS (13 mm) 5-45 PSI (34-310 kPa) [Pressure

reducing valve is required if incoming pressure exceeds 50 PSI (345 kPa)]

- CONDENSATE RETURN: 1/2” IPS (13 mm)

Model sHippinG WeiGHt MiniMUM ClearanCe

KDCT-6 44 lbs. [20 kg]

KDCT-10 61 lbs. [28 kg]

KDCT-12 70 lbs. [32 kg]

KDCT-20 95 lbs. [43 kg]

SIDES

BACK

1” [25mm]

3” [76mm]

DIMENSIONS

Model CapaCity Units a B C d e F G H J K l M n o p Q

KDCT-6

KDCT-10

KDCT-12

KDCT-20

6 gallons (23 liters)in(mm)

10 gallons

(38 liters)in(mm)

12 gallons

(46 liters)in(mm)

20 gallons

(76 liters)in(mm)

12”

(305)

16”

(406)

16”

(406)

21”

(533)

14.5” (368)

15”

(381)

17”

(432)

18”

(457)

19.5” (495)

18.5” (470)

20.5” (521)

26.5” (673)

13.75” (349)5”(127)

13.75” (349)7”(178)

23.5”

1.5”

(597)

(38)

7.5”

(191)

7.75” (197)

6.25” (159)

15.12”

8.5”

(384)

(216)

19.12” (486)9”(229)

24.12”

15.25”

(613)

(387)

12.25” (311)

16.25” (413)

15.75” (400)

10.38” (264)

8.88” (225)

10.88” (276)

10.5” (267)

30.25” (768)4”(102)

32.25”

2.38”

(819)

(60)

39.5”

2.38”

(1003)

(60)

40.5”

7.5”

(1029)

(191)

4.38” (111)

4.88” (124)

11.12” (283)

34.12” (867)0”0 mm

33.12” (841)0”0 mm

35.12” (892)0”0 mm

42.38”

1.5”

(1076)

(38)

INTENDED FOR COMMERCIAL USE ONLY.

NOT FOR HOUSEHOLD USE.

16”

(406)

19.25” (489)

26”

(660)

Form KDCT Rev 1 (November/2010)

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526

(919) 762-1000 www.southbendnc.com