Southbend HDC-12 User Manual
Counterline - Charbroiler
Gas Briquette or Radiant Countertop
Standard Features
- Available in 12”, 24”, 36”, 48”, and 60” widths
- 20,000 BTU (NAT or LP) stainless steel burner per 6”
- Stainless steel front and sides are standard, rear and
bottom panels are aluminized steel.
- Reinforced, insulated double wall sides
- Cast iron radiants
- 3/4” rear gas connection and pressure regulator
- 5” high rear and side splash guards
- Field convertible from radiant to briquette cooking
- Two-position, two sided cooking grids
- 4” Spatula width grease trough
- Wide or narrow branding grates
- Stainless steel, full width crumb tray
- One year limited Parts and Labor Warranty
- HDCL units come standard with lava briquettes
Radiant Models:
HDC-12, HDC-24, HDC-36, HDC-48, HDC-60
Briquette Models:
HDCL-12, HDCL-24, HDCL-36, HDCL-48, HDCL-60
(Model HDC-36)
Job Item#
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Front and sides are constructed of #3 polished
430 and 304 stainless steel. Bottom and rear are aluminized
steel. Sides are reinforced and fully insulated. 5” rear and side
splash.
Charbroiler: 12”, 24”, 36”, 48” and 60” (available in radiant or
lava). Stainless steel, 20,000 BTU (NAT or LP) burners every
6”. Removable two-sided cast-iron grates. Field convertible
from radiant to briquette.
Gas Heat Control System: Each straight burner is controlled
by a gas valve for independent control of ame. One standing
pilot services each burner. A 3/4” rear gas connection is
standard.
Legs: Stainless steel 4” adjustable legs.
Form HDC Rev 10 (June/2014)
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
HDC-12 HDCL-12 HDC-24 HDCL-24 HDC-36 HDCL-36 HDC-48 HDCL-48 HDC-60 HDCL-60
Models:
Shipping Crate DimenSionS & Weight
moDel WiDth
HDC-12/
HDCL-12
HDC-24/
HDCL-24
HDC-36/
HDCL-36
HDC-48/
HDCL-48
HDC-60/
HDCL-60
12”
(305)
24”
(610)
36”
(915)
48”
(1220)
60”
(1525)
BurnerS
@20,000 Btu
CrateD
CrateD
Depth
39”
(991)
39”
(991)
39”
(991)
39”
(991)
45.5”
(1157)
CrateD
Weight
120 lbs
(54 kg)
240 lbs
(108 kg)
350 lbs
(159 kg)
425 lbs
(193 kg)
500 lbs
(135 kg)
WiDth
15.5”
2
(394)
31”
4
(788)
55”
6
(1398)
55”
8
(1398)
67”
10
(1703)
UTILITY INFORMATION
GAS: Each unit has a 3/4” rear
gas connection with a male NPT
connector. Minimum supply pressure
is 7” W.C. for natural gas and 11”
W.C. for propane. All units require
a regulated gas supply. Pressure
regulator included. If using a exible
hose gas connection, the I.D. of
the hose must not be smaller than
the connector on the unit and
moDel
HDC12/
HDCL-12
HDC24/
HDCL-24
HDC36/
HDCL-36
HDC48/
HDCL-48
HDC60/
HDCL-60
must comply with ANSI Z21.69,
providing an adequate means of
restraint to prevent undue strain on the gas connection.
gaS (Btu/hr)
natural propane
40,000 40,000
80,000 80,000
120,000 120,000
160,000 160,000
200,000 200,000
OPTIONS AND ACCESSORIES
Stainless steel stand
Casters for stand
Stainless steel plate shelf with or without cutting board
MISCELLANEOUS
- If casters are used with ex hose, a restraining device should be
used to eliminate undue stain on the ex hose.
- For use in non-combustible locations only.
- Minimum clearance from noncombustible construction is zero.
- Install under vented hood.
- Check local codes for re and sanitary regulations.
NOTICE:
Southbend has a policy of continuous product research and
improvement. We reserve the right to change specications and
product design without notice. Such revisions do not entitle the
buyer to corresponding changes, improvements, additions or
replacements for previously purchased equipment.
2” high insulator base for mounting on refrigerated base
Battery Spark Ignition
Briquette kit to convert radiant to briquette
Plated grids for sh
Form HDC Rev 10 (June/2014)
Radiant kit to convert briquette to radiant
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Loading...