Southbend ES/10CCH, EB/10SC General Manual
CONVECTION OVEN
MaraThONEr GOld
ELECTRIC, SINGLE DECK
Standard Features
- ENERGY STAR® qualied (standard depth only)
- 11kW high efciency heating elements
- Available standard and bakery depths
- Single deck convection oven is 55” in height (with optional
casters)
- Patented “plug-in, plug-out” control panel - easy to service
- Stainless Steel front, sides and top
- Dependent doors with windows
- Coved, fastener-free, porcelain interior
- Heavy duty, cool touch, stainless steel door handle
- Soft Air, two speed, 1/2 hp, fan motor
- 11-position rack guides and 5 plated oven racks
- Electronic ignition with solid state temperature controls
- Forced cool down fan mode
- Oven “ready” light -cycles with burners
- Interior oven lights
- Stainless steel rear jacket
Available Controls
SC-Standard Controls
140°F to 500°F solid state thermostat and 60 minute
mechanical cook timer.
CCH-Cycle / Cook & Hold Control
150°F to 500°F temperature controller with 140°F to 200°F
“Hold” thermostat Dual digital display shows time and temperature. A fan cycle timer pulses the fan.
ES/10SC, ES/10CCH,
EB/10SC, EB/10CCH
(ES/10SC shown with optional casters)
Job Item#
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Stainless steel front, top, sides and rear
jacket.
Doors: Dependent doors with windows. Stainless steel
construction, heavy-duty welded steel frame and 5/8” diameter
full-length hinge pin.
Electrical System: Terminal connections are located below oven
section and are accessible from the front of the oven. These
sheath type electrical heating elements located at the rear of the
oven function as a single heating unit with a combined rating of
11 kW. Available voltages include 208. 240, 380, and 480 VAC
single or three phase, 50/60 Hz. Ovens equipped with 480VAC
single or three phase heating elements use 240V controls and
motors and do not require separate electrical lead wires.
Legs: 26” Stainless steel, triangular legs standard.
From E/10 Rev 5 (November/2009)
www.yatesgd.com www.yatesgraphicdesign.com
Rack and Rack Guides: Heavy-duty removable wire rack guides
spaced on 1-5/8” centers offer 11 different rack positions. 5 wire
racks provided with each oven.
Blower Fan and Motor: 1/2hp, 2-speed motor, 1725/1140
r.p.m
Oven Heating: Oven heating is regulated by an adjustable
solid state thermostat control. Blower fan circulates air within
the cavity “scrubbing” heat to the oven interior for even heat
distribution within the cavity. Manual reset high limit temperature
control protects the oven from overheat condition.
Control Panel: Located of front, at right side of oven, away
from heat zone. Removable panel opens downward for easy
servicing.
Note: Oven cannot be operated without fan in operation.
Printed in USA
Models:
17”
(432)
ES/10SC EB/10SC ES/10CCH EB/10CCH
12.75”
(324)
DEpth OvEn IntErIOr rack cLEarancE ShIppIng cratE
MODEL
a B WIDth DEpth hEIght WIDth DEpth WIDth DEpth hEIght vOLuME WEIght
ES/10
EB/10
Note: When shipped on legs, crated height is 69” (1753 mm)
39.75”
(1010)
46.75”
(1187)
30”
(763)
36.38”
(924)
29”
(737)
29”
(737)
22.5”
(572)
28”
(711)
20”
(508)
20”
(508)
UTILITY INFORMATION
Standard:1/2 horseposer, 2 speed motor, 1725/1140 r. p. m.
ElECTrICal daTa aMps pEr lINE
3 phasE
EaCh OVEN VOlTaGE 1 phasE
X Y Z NEuT.
12 kW
Heating
Elements and
Controls
220/240 VAC, 50Hz
240 VAC, 60Hz
380/220 VAC, 50Hz
415/240 VAC, 50Hz
480 VAC, 60Hz
* All units shipped single phase. Single phase units are easily converted to three phase.
208 VAC, 60Hz
58
46
50
32
50
25
34
28
30
17
15
14
34
28
30
17
15
14
31
24
26
21
19
13
Shown with
optional casters.
Legs only
reduces height
by 3”
28.25”
(718)
28.25”
(718)
0
0
0
4
4
0
Shown with
optional casters.
Legs only
reduces height
by 3”
22”
(559)
27.25”
(692)
55”
(1399)
55”
(1399)
45.5”
(1157)
45.5”
(1157)
45”
(1143)
45”
(1143)
65.2 cu. ft.
(1.85 cu. m.)
65.2 cu. ft.
(1.85 cu. m.)
620 lbs
(281.2 kg.)
690 lbs
(313.0 kg.)
MISCELLANEOUS
- Clearances from combustibles: Top, bottom, right,
left side -0”.
- Recommended - install under vented hood.
- Check local codes for re and sanitary regulations.
NOTICE:
Southbend has a policy of continuous product
research and improvement. We reserve the right to
change specications and product design without
notice. Such revisions do not entitle the buyer to
corresponding changes, improvements, additions or
replacements for previously purchased equipment.
Stainless Steel oven interior
Stainless Steel exterior bottom
6” stainless steel legs
208/240V 50/60 cycle ( for use on 1
or 3 phase)
From E/10 Rev 5 (November/2009)
OPTIONS AND ACCESSORIES
Bolt-down anged legs
Swivel Caster - front with locks
Knocked down packaging
Export Crating
Extra oven racks
www.yatesgd.com www.yatesgraphicdesign.com
INTENDED FOR COMMERCIAL USE ONLY.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
Down draft diverter for direct ue
3/4” quick disconnect with exible hose
(specify length: 3ft, 4ft, or 5ft)
2” air insulation panel ( stainless steel
only)
NOT FOR HOUSEHOLD USE.
(919) 762-1000 www.southbendnc.com
Loading...