Southbend ECTRS-16 General Manual

ELECTRIC COUNTER TILTING

A Middleby Company

Model

ECTRS-16

16 Gallon

Capacity

60 Liter

Standard Features

- Stainless steel construction

- Polished outward sloping interior for full access to cooking
surface

- Electric heating elements rated at 7.5 kW for even heat transfer

- Side mount pivots mounted in stainless steel console on base

- Stainless steel tilt handle with heat resistant knob

- Forward tilting pan for complete content removal

- Power switch, pilot light, thermostat, safety thermostat and
high temperature cut-off controls.

ROUND SKILLET

Job Item#

CONSTRUCTION SPECIFICATIONS

Southbend electrically heated counter tilting skillet. The
ECTRS-16 is constructed of one piece coved corner, 10 gauge
stainless steel with a #4 exterior finish and a polished interior.
The pan sides slope outward to facilitate access to the
cooking surface. Cooking surface shall be 3/8” thick stainless
steel clad plate, fitted with clamped on electric heating
elements rated at 7.5 kW for even heat transfer over entire
cooking surface. Pan shall be fitted with side pivots mounted
in sealed stainless steel clad consoles mounted on a 10
gauge stainless steel base with #4 finish. Pan shall be fitted
with a stainless steel tilt handle with heat resistant knob for
tilting the pan forward for complete removal of contents.

(shown with optional stand)

Controls shall be integrally mounted and shall include a power
switch, pilot light, thermostat, safety thermostat and high
temperature cut-off.

The skillet shall operate in a temperature range of 160
450

°F (45°C to 232°C)

The skillet can be mounted on a 30” (762 mm) wide stainless
steel stand.

C-CSA-US Certified and NSF Approved.

°F to

Form ECTRS-16

A Middleby Company

05/04 Printed in USA

Models:

 ECTRS-16

UTILITY CONNECTIONS

Electrically heated, round, counter tilting skillet operating at 0 psi (0kPa) and rated at 7.5 kW

Controls:

- 208 VAC, 1 Phase, 50/60 Hz

- 208 VAC, 3 Phase, 50/60 Hz

- 220 VAC, 1 Phase, 50/60 Hz

- 220 VAC, 3 Phase, 50/60 Hz

- 240 VAC, 1 Phase, 50/60 Hz

- 220/380 VAC, 3 Phase, 4 wire

- 240/415 VAC, 3 Phase, 4 wire

Electrical: Rating to be as specified on data plate.

Drain: 1 1/2” - 11 1/2” NPT (for optional stand)

LEDOMWkESAHP

61-SRTCE

5.7

10.631.433.13A/NA/NA/N

38.027.911.814.114.010.9

OPTIONS/ACCESSORIES

- 380 VAC, 3 Phase, 50/60 Hz Controls

- 415 VAC, 3 Phase, 50/60 Hz Controls

- 480 VAC, 3 Phase, 50/60 Hz Controls

- 480 VAC, 3 Phase, 50/60 Hz Controls

- Etched gallon/liter markings

- Marine Lock

- Single pantry faucet with swing spout

- Double pantry faucet with swing spout

INTENDED FOR COMMERCIAL USE ONLY.

ENILREPSPMA

V802V022V042V083V514V084

- SD-30 stand

- Lift off cover

- Correctional Package

NOT FOR HOUSEHOLD USE.

Form ECTRS-16

1100 Old Honeycutt Rd., Fuquay-Varina, NC 27526

www.southbendnc.com