Southbend 234R Specifications
Double RaDiant bRoileR
Southbend’s Double Radiant Broilers combine speed, efciency
and output in a broiler that just won’t quit. From the rugged,
welded steel broiler grids to the dependable grid adjustment
mechanism, Southbend’s Broilers are built tough to last.
Standard Features
- Total BTU: 220,000 BTU NAT (180,000 BTU LP)
- 34” wide x 72-1/2” high including 6” stainless steel legs
- 2” Flue Collar
- Stainless steel front, sides, top and legs
- Interior shelving made of high-heat aluminized steel
- Equipped with twin burner controls
- Easy grip, spring balance adjusting lever
Model: 234R
Job Item#
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Top, front, and sides are 430 stainless steel
#3 polish. Aluminized steel back.
Broiler: Double deck radiant broiler with 4 Schwank broiler
burners at 55,000 BTU NAT (45,000 BTU LP) with separate
controls. Constant-burning pilot lighters. Overall dimensions:
34” wide x 37” deep x 72-1/2” high (not including vent) with two
adjustable grids. Fully insulated lining and burner box.
Schwank Broiler Burners: Radiant burners with ceramic
(shown with optional casters)
tile catalysts -proven capable of withstanding extreme high
temperatures without deteriorations or disintegration.
Broiler Grid: Roll-out broiler grid is 24-1/2” wide and 28”
deep (rolls out to 17-1/4”), with four height positions. The front
3” receive less heat so can be used as a holding area.
Legs: Stainless steel 6” adjustable legs standard
Form 234R Rev 4 (August/2014)
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Models:
34" (864)
TOP VIEW
37"
(940)
4-1/4" (108)
Gas connection is 12"
(305 mm) above floor.
FRONT VIEW
74-1/2"
(1892)
72-1/2"
(1842)
58-3/4"
(1492)
34-1/2"
(876)
234R
Dimensions -in (mm)
Model
234R
Dimensions shown in inches and (millimeters)
Shipping Crate diMenSionS & Weight
Width height depth VoluMe Weight
45.5”
83”
(1156)
(2108)
55”
(1397)
120.2 cu ft
(3.40 cu m)
932 lbs
(422.7kg)
GAS: Each unit has a 3/4” rear gas connection with a male
NPT connector. Minimum supply pressure is 7” W.C. for
natural gas and 11” W.C. for propane. If using a exible hose
gas connection, the I.D. of the hose must not be smaller than
the connector on the unit and must comply with ANSI Z21.69,
providing an adequate means of restraint to prevent undue
strain on the gas connection.
UTILITY INFORMATION
Model
234R 220,000 180,000
Stainless steel ue diverter
gaS (Btu/hr)
natural propane
MISCELLANEOUS
- Install under vented hood
- Check local codes for re, installation and sanitary
regulations.
NOTICE:
Southbend has a policy of continuous product research
and improvement. We reserve the right to change
specications and product design without notice. Such
revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for
previously purchased equipment.
OPTIONS AND ACCESSORIES
Casters in lieu of legs
Form 234R Rev 4 (August/2014)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Loading...