Southbend 20036RSB, 20048RSB, 20060RSB, 20064RSB, 20072RSB General Manual

Standard Features

- Available in 32”, 36”, 48”, 60, 64”, 72”, 84”, 96”, and 108”
widths that can support any of the modular sectional
range tops

- Self-closing heavy-duty drawers slide on stainless steel
rollers

- Drawers hold standard sized (12” x 20” x 4”) pans -pans
not included

- Removable door assembly

- CFC-free refrigeration system has an expansion valve
for rapid temperature recovery -the remote condenser
unit is NOT included

- Foamed-in-place CFC-free polyurethane insulation
provides highest insulation factor available

- Rubber magnetic door gaskets provide a positive seal
and easy cleaning

- Stainless steel top, front, sides, back, drawers, and
interior cavity

- 6” adjustable stainless steel legs

- Coved interior corners (meets NSF standard #7)

- Condensate drain (1/2” I.D. tube) with optional electric
condensate evaporator

- Adjustable thermostat with external dial thermometer

- Mullion coils are coated to resist corrosion and provide

maximum air ow for even cooling

- Operates on 120-volt single phase 50/60Hz AC power

- Warranty: two years on specied operational parts, ve

years on compressor, and one year on labor from date
of purchase

RefRigeRated Base

(Remote Condenser)

Job Item#

20032RSB (32” wide); 20036RSB (36” wide);
20048RSB (48” wide); 20060RSB (60” wide);
20064RSB (64” wide); 20072RSB (72” wide);
20084RSB (84” wide); 20096RSB (96” wide);

20108RSB (108” wide)

(Model 20064RSB with optional casters)

STANDARD CONSTRUCTION SPECIFICATIONS

Exterior Finish: Top, front, sides, back, drawers, and interior cavity are 304 stainless steel #3 polish.

Drawers: Stainless steel -holds standard size (12” x 20” x 4”) pans -not included. Removable drawer assembly.

Base: 32-1/2” deep and 26” high, including adjustable legs or casters -32” units are 36” deep.

Refrigerant: R-404a -CFC-free. Uses an optional remote condenser.

Form PRR Rev 3 (September/2009)

www.yatesgd.com www.yatesgraphicdesign.com

Printed in USA

The drawer-front width, drawer-extension distance, and overall depth may vary (the maximum values are specied and shown)

# of

Model Width

20032RSB 32” - 2 - 4 7.3 (0.21) 1550 2.5 1/4 H.P.

20036RSB 36” - 2 - 4 7.3 (0.21) 1550 2.5 1/4 H.P.

20048RSB 48” - - 2 4 10 (0.28) 1775 2.5 1/4 H.P.

20060RSB 60” 2 2 - 6 13 (0.28) 1875 3 1/4 H.P.

20064RSB 64” 2 2 - 6 13 (0.28) 1875 3 1/4 H.P.

20072RSB 72” - 2 2 8 16 (0.45) 1920 3 1/3 H.P.

20084RSB 84” 4 2 - 8 19 (0.54) 1955 7 1/3 H.P.

20096RSB 96” - 6 - 12 23 (0.51) 1955 4 1/2 H.P.

20108RSB 108” - 2 4 12 26 (0.74) 2000 4 1/2 H.P.

Drawers

18” 26” 31”

Amperage is approximate and is for compressor only. Do not use for breaker sizing.

All models have a six foot power cord with a grounded plug to receive 50Hz or 60Hz
single-phase AC. Condensate drain is a 1/2” inside diameter vinyl tube. Condenser
unit is NOT included.

# of

Pans

Cooled
Volume

cu. ft (cu. m.)

Cooling Cap

BTU/hour

Electricity

120V Amps

Compressor

Motor

Shipping

Weight

325 lbs

(147 kg)

325 lbs

(147 kg)

400 lbs

(181 kg)

530 lbs

(240 kg)

530 lbs

(240 kg)

637 lbs

(289 kg)

735 lbs

(333 kg)

835 lbs

(379 kg)

940 lbs

(426 kg)

OPTIONS AND ACCESSORIES

UTILITY INFORMATION

 Electric condensate evaporator
 Cable restraint kit (to restrict movement when on casters)

 Casters -front two casters lock
 Open-frame base with casters

MISCELLANEOUS

- If casters are used with ex hose, a restraining

device should be used to eliminate undue strain on

the ex hose.

- Minimum clearance on rear is 2” (51 mm)

- Modular range top sections can be mounted
directly on top using an insulated base adapter.

- Can be part of sectional battery, provided that
the adjoining base sections are insulated, or do not
produce heat.

- Avoid locating where the temperature will drop
below 55°F or rise above 90°F

- Chec k lo ca l co des for fi re a nd s an i ta r y
regulations.

NOTICE:

Southbend has a policy of continuous product
research and improvement. We reserve the

right to change specications and product design

without notice. Such revisions do not entitle the
buyer to corresponding changes, improvements,
additions or replacements for previously purchased
equipment.

INTENDED FOR COMMERCIAL USE ONLY.

NOT FOR HOUSEHOLD USE.

Form PRR Rev 3 (September/2009)

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526

[phone] www.southbendnc.com

www.yatesgd.com www.yatesgraphicdesign.com