Soundtube RF31-EZ User Manual
RF31-EZ
Install Instructions For:
RF31-EZ speaker
Box contents
1 Speaker
1 Grille
2 Wire nuts
4 Mounting screws
Screws
Optional Accessories
Theft-resistant, stainless steel
grille (AC-RF31-TRG)
NOTE: the RF31-EZ is designed to install
into a standard 2-gang junction box.
SoundTube recommends you test the fit
before installing the junction box.
Speaker
Grille safety clip
Grille
© 2010 SoundTube Entertainment, Inc. All rights reserved. PN INS-RF-31 Rev 05.20.10
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. Fo r safety and for
optimu m au dio performance, installe r must follow all direc tions issued by SoundTube Entertainment.
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Two-gang junction box (installer supplied)
RF31-EZ
Installation Instructions For:
RF31-EZ speaker
1.435.647.9555
|
800.647.TUBE
|
www.soundtube.com
1. Unpack speaker.
1.
2.
4. Attach grille safety clip
by placing the large end of
the clip over snap-fit post
(1), then sliding clip until
small end snaps into place
around post (2).
2. Connect speaker wires to
signal wires using included
wire nuts.
5. Align tabs on snap-fit
grille with slots in baffle,
gently press grille into place.
3. Install the RF31-EZ into
the installer supplied
junction box using included
fasteners.
6. Done!
Loading...