Soundtube LA880i User Manual
Install Instructions For:
LA880i speaker
Mounting Bolts
AC-LA8-BACK Back plate
Box contents
1 Speaker
1 10' Safety cable
3 Black zip ties
1 AC-LA8-BACK Back plate
7 Mounting bolts (1/4-20 x 0.5")
1 Euroblock connector
Optional mounting accessories
• Allen Products MM-024
Pan and Tilt wall mount
• Allen Products PoleStar pole mount
• Allen Products MM-020X
MultiMount ceiling mount
• Allen Products SAS-1WA-20
One-Way-Array
• Allen Products TCK-010-S
Fly cable kit
• AC-LA8-LINK stacking adapter plate
• AC-LA8-FLY hanging adapter plate
• AC-LA8-BACK bent back plate
1.435.64 7.9555
Euroblock connector
Connector Plate (Back)
|
800.64 7.TUBE
|
www.soundtube.com
LA880i
© 2012 SoundTube Entertainment, Inc. All rights reserved. PN IN S-LA880i Rev 08.15.12
Warning
So undTube s peakers must be installed by a profes s iona l audioins talle r/contracto r. Forsafety and for
optimum a udio performa n ce, installer mus t follow all direction s issued by S oundTube E ntertainme nt.
Warning
Do notspec orinstall speaker near support beam, ventilation duct or
other structu re thatmay interfere withspeaker function or dispersion.
Surface Mount Instructions
2. Using supplied bolts, attach
1. Unpack speaker. 3. Attach Allen Products
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.
MM-024 speaker adapter plate
(available separately) to to rear
of speaker using supplied bolts.
See Allen Products installation
manual for more details.
1.435.64 7.9555
|
800.64 7.TUBE
4. Attach Allen Products Pan
and Tilt bracket (available
separately) to wall. Choose
a secure mounting surface with
sucient strength to reliably
hold the speaker.
|
www.soundtube.com
5. Attach speaker with Allen
Products speaker adapter plate
to wall plate.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
6. Attach included safety cable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
10. If using SpeakOn cable,
insert the end of the cable into
the SpeakOn input connector,
and twist to lock.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, reference its wiring
instructions for steps 8-11.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
12 . Done!
Loading...