Soundstream Technologies X3-152, X3-122, X3-182 User Manual

X3-122
X3-152
X3-182
Woofer & Enclosure Information
WWW.SOUNDSTREAM.COM
Congratulations on your new Soundstream sub-woofer purchase. We greatly appreciate your business. This may look like a run-of-the-mill cardboard box, but it’s actually a protective barrier over one of the finest engineered and assembled sub-woofers available.
Harmonic Indulgence… Listen and Feel
Features, Parameters, & Dimensions
Coated Pulp Paper Cone
Asymmetrical S-Block Foam Surround
CCAW Voice Coil on Aluminum Former
8ga Duplex Direct Wire Terminals
Triple Nomex Spider
Specifications X3-122 X3-152 X3-182 Fs (Hz) 39.55 35.96 32.68 Qms 7.017 5.435 5.456
Vas (ft³) 0.503 1.378 2.401 Cms (mm/N) 0.536 0.515 0.516 Mms (g) 303.4 284.7 461.6 Xmax (mm) 20.00 20.00 20.00 Xmech (mm) 40.00 40.00 40.00
Piston Diameter (in) 9.252 12.01 13.78 Sd (in²) 67.23 113.20 149.10
Qes 0.657 0.456 0.454 Re (Ω) 3.89 3.88 3.83 Z (Ω) 4 4 4 BL (Tm) 21.12 27.19 28.27 BurpPower DCV (W) 95V (9,000) 100V (10,000) 105V (11,000) Rms Power DCV & W Qts 0.601 0.420 0.419 NO (%) 0.130 0.384 0.507 1w/1m SPL (dB) 83.15 87.85 89.00 Voice Coil Diameter (in) 4.00” 4.00” 4.00” Impedance (Ω) DVC 2Ω DVC 2 DVC 2 M-vd (ft. Overall Diameter (in) 12.75” 15.75” 19.00” Overall Height (in) 8.50” 9.75” 11.125” Mounting Depth (in) 7.625” 8.625” 10.00” Cutout Diameter (in) 11.125” 14.125” 16.875” Flange Width (in) 0.75” 0.75” 0.75” Flange Height (in) 1.00” 1.00” 1.00” Weight (lbs) 50 65 65
3
) 0.265 0.406 0.543
71V (5,000) 77V (6,000) 84V (7,000)
Cast Aluminum Basket w/ Texture Finish
Voice Coil Perimeter Cooling
Vented Back Plate
High BL Motor Assembly
Glue-less Re-Cone Kit Available
WWW.SOUNDSTREAM.COM
Enclosure Dimensions
Soundstream does not provide enclosure dimensions as there are infinite variables when designing a box, i.e. vehicle, amplifier, music preferences, etc… For designs tailored to your specific needs, please contact us at tech-support@soundstream.com, or 1-800-724-1377.
Enclosure Construction
All enclosures should be made of .75” (3/4”) material only. When possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth of the enclosure to compensate. All volumes INCLUDE vent/ port and subwoofer displacements. DO NOT change the volume unless you plan on adding a substantial amount of bracing. For added performance, applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out reflections within the enclosure.
Enclosure Recommendations
X3-122 Hi-Tuned Ft. Min. 2.00 (2) 4" x 14" 50.1 38.0 Opt. 3.00
Max. 4.00 (3) 4" x 6.75" 50.2 37.8
Ft. Min. 3.00 Opt. 4.50 Max. 6.00 (4) 4" x 4.75" 50.5 40.0
Ft. Min. 4.00 Opt. 6.00 Max. 8.00
3
Round Port FB F3 Ft.3 Round Port FB F3
(3) 4" x 12.25"
50.2 37.8
X3-152 Hi-Tuned
3
Round Port FB F3 Ft.3 Round Port FB F3 (2) 4" x 6.5" (3) 4" x 5.5"
50.3 40.6 Min. 3.00
50.2 40.1
X3-182 Hi-Tuned
3
Round Port FB F3 Ft.3 Round Port FB F3
(4) 4" x 12.75"
(3) 6" x 12"
(4) 6" x 10.75"
50.2 40.5
50.1 39.7
50.1 39.4
WWW.SOUNDSTREAM.COM
Min. 2.50 Opt. 3.50 Max. 4.50 (2) 4" x 15.5" 29.9 25.0
Opt. 4.50 Max. 6.00 (3) 4" x 18.25" 29.9 26.2
Min. 4.00 Opt. 6.00 Max. 8.00
X3-122 Low-Tuned
(3) 3" x 14.75" (3) 3" x 12.50"
X3-152 Low-Tuned
(2) 4" x 14"
(2) 4" x 10.25"
X3-182 Low-Tuned
(3) 4" x 16.5"
(2) 6" x 20.75"
(2) 6" x 19.5"
39.9 31.6
34.8 28.2
40.0 34.0
34.9 29.9
40.0 34.0
34.9 29.9
30.0 26.2
4 to Amplifier
1 to Amplifier
2 to Amplifier
1.33 to Amplifier
1 to Amplifier
WWW.SOUNDSTREAM.COM
Loading...