Soundstream Technologies PXW-10, PXW-10-2 User Manual
2 Ω to Ampli-
PXW
PXW-10
PXW-10/2
1 Ω to Ampli-
1 Ω to Ampli-
10 - 10/2
Specifications & Enclosure
2 Ω to Ampli-
Recommendations
Congratulations on your new Soundstream sub-woofer purchase. We
greatly appreciate your business. This may look like a run-of-the-mill
cardboard box, but it’s actually a protective barrier over one of the
finest engineered and assembled sub-woofers available.
Harmonic Indulgence… Listen and Feel
Enclosure Dimensions
Soundstream does not provide enclosure dimensions as there are
infinite variables when designing a box, i.e. vehicle, amplifier, music
preferences, etc… For designs tailored to your specific needs, please
contact us at tech-support@soundstream.com, or 1-800-724-1377.
Features, Parameters, & Dimensions
Polypropylene Injection Molded Cone
NBR-Rubber Surround
8 ga. Compression Wire Terminal
Conex/Cotton Composite Spider
series wired PXW-10 PXW-10/2
Fs (Hz)
Qms
Vas (ft³)
Cms (mm/N)
Mms (g)
Rms (kg/s)
Xmax (mm)
Xmech (mm)
Piston Diameter (in)
Sd (in²)
Qes
Re (Ω)
Z (Ω)
BL (Tm)
Rms Power (watts)
Qts
NO (%)
1w/1m SPL (dB)
2.8V SPL (dB)
Voice Coil Diameter (in) 2.00” 2.00”
Impedance (Ω) DVC 4Ω DVC 2Ω
M-vd (ft.
Overall Diameter (in) 10.50” 10.50”
Overall Height (in) 6.375” 6.375”
Mounting Depth (in) 5.75” 5.75”
Cutout Diameter (in) 9.25” 9.25”
Flange Width (in) .75” .75”
Flange Height (in) 0.625” 0.625”
Weight (lbs) 8.5 8.5
3
)
Texture Coat Finish
Stamped Steel Basket
Suspension Integrated Tinsel Leads
Vented Back Plate
33.53 31.27
7.265 6.847
1.355 1.376
0.248 0.252
90.8 102.9
2.632 2.951
11.10 11.50
16.65 17.25
8.069 8.069
52.00 52.00
0.970 0.861
7.2 4.0
8 4
11.92 9.69
350 350
0.856 0.765
0.144 0.134
83.61 83.28
84.19 86.43
0.100 0.100
Enclosure Construction
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the
depth of the enclosure to compensate. All volumes INCLUDE vent/
port and subwoofer displacements. DO NOT change the volume
unless you plan on adding a substantial amount of bracing. For
added performance, applying a coat of fiberglass resin to the interior
walls will greatly improve sealing the enclosure. Adding a thin layer
of poly-fill will improve response by smoothing out reflections
within the enclosure. Please see last page for woofer wiring diagrams.
Enclosure Recommendations
Cubic
Feet
Min. 1.25 3" x 12" 35.5 33.6 1.25 3" x 12" 35.5 32.3
Opt. 1.50 3" x 12" 32.0 30.3 1.50 3" x 12" 32.0 29.1
Max. 1.75 3" x 12" 29.4 27.9 1.75 3" x 12" 29.4 26.6
Cubic
Feet
Min. 0.75 1.379 41.9 0.75 1.249 40.3
Opt. 1.00 1.253 38.6 1.00 1.134 37.3
Max. 1.25 1.174 36.7 1.25 1.061 35.6
PXW-10 Ported PXW-10/2 Ported
Port
Diameter
FB
(Hz)
F3
(Hz)
Cubic
Feet
Port
Diameter
FB
(Hz)
F3
(Hz)
PXW-10 Sealed PXW-10/2 Sealed
Q T C Tuning (Hz)
Cubic
Feet
Q T C Tuning (Hz)
Loading...