FEATURES
CONTENTS
Compatible with PAL DVD (Video CD)
and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
A single LSI chip now integrates all
major DVD playback circuit functions
including
converter, and audio decoders.
LIR stereo analog audio out~uts for
connection to exiiting head unit aux
inputs. Video output
video.
Supplied remote handles multifunction software (multi-language
audio-tracklsubtitle. multi-angle, multistory, etc.), plus all basic functions.
MPEG2 decoder, video DIA
IS
composite
USE THIS PRODUCT
SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
Thls product is deslgned to operate with
a 12 volt DC,
system (the regdar system in a ~orth
American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
-
...
negatlve ground battery
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
For lnstallation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30".
Safety Information
Disc Notes
Installation
Electric Connection
Remote Control
Preparing the Remote Control
Loading a DVDNCDICD Disc
Ejecting a Disc
Basic Operation
On-Screen Display Function 1
Multi-audio Language Function
Menu Function
Tnle Menu Function (For DVD only)
MuB-subtitle Language Function (For DVD only)
Multi-angle Function (For DVD only)
MP3 Disc Play
Setup
Initial Setup
General Setup
Speaker Setup
Audio Setup
Preferences Setup
Defaults Table ................................................................................................................... 19
Specifications
.........................................................................................................
..........................................................................................................
........................
.................................................................................................................
.................................................................................................................... 14
..................................................................................................................
.............................
............................................................................................
.4
5
...........................................................................................
.................................................................................................
...........................................................................................
............................................................................................
...................................................................................................................
................................................................................................
..........................................................................................
.......................................................................................
...................
.................................................................................................................
...........................................................................................................
..................................................................................................
..
..........................................................................................
.........................
..
....................................................
............................................................
................................................................................
..
.....................................................................................
..
...................................................................................
.8
10
11
12
12
12
12
13
14
14
16
16
17
20
6
7
9
9
9
SAFETY
CAUTION:
MOBILE DVD PLAYER IS A CLASS
LASER PRODUCT. HOWEVER THlS
MOBILE DVD PLAYER USES A
VlSlBLUlNVlSlBLE LASER BEAM WHICH
COULDCAUSEHAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS
ORPERFORMANCEOFPROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
.
TO REDUCE THE RlSK OF FlRE OR
ELECTRIC SHOCK. DO NOT EXPOSE
THlS EQUIPMENT TO
~
MOISTURE.
TO REDUCE THE RlSK OF FlRE OR
ELECTRIC SHOCK. AND ANNOYING
INTERFERENCE. USE ONLY THE
RECOMMENDED ACCESSORIES.
-
THlS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected by
method claims of
other intellectual property rights owned by
Macrovision Corporation and olher rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
INFORMATION DISC NOTES
I
-
DO NOT
~~
-
celtain U.S. patents and
RAIN OR
Region Management Intonnation
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD Player
cannot play this disc.
Information that is recorded
Disc
formats
-
1%
d"oBE
D~~~~~~~~~~o
Discs which cannot
player
DVD-ROM
DVD-WDVD-RAM
CDV
CD-G
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.
Direct sunlight
2.
Dirty, dusty and damp areas
3.
Near car heaters
4.
On the seats or dashboard
Disc Cleanlna
Use a dry so<cloth to wipe the surface
dlsc
If the
sliahtlv moisturised with isoDroovl irubbina)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it unusable)
depend;ng on your rhandle it and condltlons
In the usage environment.
supported
DVD
.
12
.
(Single-sided disc only)
Video CD
12
CD
12
IS
aulte dirty, use a soft cloth
cm disc
cm disc
cm disc
be
played
by
this player
with
.
..
.
surface of
this
Note these scratches are not an indication
of any problem with the player.
Domttwch
the
of
the
Wipe
the
dkc
horn
toward the
Preparing
A new disc may have rough edges on its
inside and outside
rough edges is used. the proper setting will
not be performed and the player will not
Dlav the disc. Therefore. remove the rouah
edges in advance by using a ball point p;n
or wncil as shown on the riaht. To remove
the rough edges, press the iide of the pen
or pencil against the inside and outside
edges of the disc.
New Discs
Rough spats
wtside
edge
cenm
outoide
edge
with
Rough
edges. If a disc with
an
-.
~wgh'wts
on
inside
edge
'
underride
disc
Spots
INSTALLATION
DVD PLAYER
pJ
ELECTRIC CONNECTION
I
Note:
1.
FiM remove the two screws that locket the unit core, then attach the brackets on
both sides of unit with screws (M4x6). last install the unit with screws (M5x25).
2.
When fix the unit, you can slide the screw (M5x25) to left side or right side to
your needed position. In the figure above, select 1 and 3 position tofix the bracket,
2
and you can also select
and 4 position to fix the bracket.
meet
,
...........................
AmC
,
i
ADAPTOR
............................
(OPTIONAL)
Iy
VIDEO OUT
AUDIO R OUT
;
I
REMOTE CONTROL RECEIVER
CIGARETrE LIGHTER
AUDIO L OUT