Soundstream SC-8CA, SC-40CA, SC-20CA User Manual
SPECIFICATIONS
Model: SC-8CA
8 Farad Hybrid Super Capacitor (Carbon And Electronic Capacitor) With Blue
Digital AMP-DCV Display, Blue Flash LED
Capacitance .................................……...... 8,000,000 micro farad
Working Voltage ...............................…….….. 16DC
Surge Voltage .......................................……… 18DC
E.S.R. (Equivalent Series Resistance)------ 0.0015 ohm @120hz/ 25°C
Capacitance Tolerance------------------------ ± 10%
Model: SC-20CA
20 Farad Hybrid Super Capacitor (Carbon And Electronic Capacitor) With Blue
Digital AMP-DCV Display, Blue Flash LED
Capacitance .................................……...... 20,000,000 micro farad
Working Voltage ...............................…….….. 16DC
Surge Voltage .......................................……… 18DC
E.S.R. (Equivalent Series Resistance)------ 0.0015 ohm @120hz/ 25°C
Capacitance Tolerance------------------------ ± 10%
Model: SC-40CA
Capacitance .................................……..... 40,000,000 micro farad
Working Voltage ...............................…….….. 16DC
Surge Voltage .......................................……… 18DC
E. S. R. (Equivalent Series Resistance) ..…….. 0.0015 ohm @ 120hz/25℃
Capacitance Tolerance …………………..…… ±10%
40 Farad Hybrid Super Capacitor (Carbon And Electronic Capacitor) With
Blue Digital AMP-DCV Display, Blue Flash LED
DETAILED FEATURES:
a) 4 digits hi-end blue light display DC voltage meter that can measure 0.1 DCV range.
b) Reverse pole connecting PCB buzz warning function. I f the capacitor is connected incorrectly
by reversing the positive and negative wires during the installation process the PCB will issue a
45 second noise to warn you.
c) Hi-end platinum plated 100% brass solid parts and chrome plated metal cover
d) Over voltage limit and low battery voltage limit warning. When the system voltage peeks over
17 DCV or LESS than 10 DCV. The buzzer on the PCB will issue an audible noise warning.
e) Multiple small capacitance capacitors linked to provide the lowest inner E.S.R. and largest
moment discharge power.
- 1 -
INSTALLATION AND MOUNTING:
You must first attach the mounting tabs to the capacitor before mounting it.
Use the supplied hardware shown in the picture to the right. Notice the small
mounting screw hole in the capacitor chassis.
CHARGING THE CAPACITOR AND WIRING:
The capacitor must be charged before connecting the Power and Ground
cables to the capacitor. Failure to charge the capacitor will result in a large
spark generated from the rapid inflow of current.
- 2 -
Loading...