CONTENTS
SHP-IR • SHP User’s Manual - Contents
U S E R ’ S M A N U A L
2 General precautions
2 Safety precautions
2 Installation precautions
2 What is included?
3 Headphone controls and features
4 SHP-IR features
5 System wiring:
SHP-IR transmitter
6 Headphone battery replacement
7 Using SHP with a monitor with
built-in IR audio transmitter
8 Troubleshooting
8 Specifications
Congratulations on your purchase
of a Sound Storm Laboratories
wireless infrared headphone
system.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of listening
pleasure.
Thank you for making Sound Storm
Laboratories your choice in car audio
and video entertainment!
page
SHP-IR
Wireless Infrared Headphone System
(Two Headphones and Transmitter)
SHP
Wireless Headphones
(for use with Sound Storm SHP-IR and
Sound Storm Monitors with Infrared
Audio Transmission)
L A B O R A T O R I E S
®
SHP-IR • SHP User’s Manual - page 2
General precautions
Safety precautions
Please read this manual completely
and carefully prior to attempting to
install your new Sound Storm mobile
audio/video equipment. Installed
correctly, your Sound Storm
equipment will provide you with years
of enjoyable and safe usage.
Installation of this equipment in any
portion of a vehicle which impairs or
distracts the driver is improper and
dangerous. Sound Storm assumes no
liability whatsoever for failure to follow
the proper installation of this product.
Please keep this manual in a safe place
for future reference.
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
may be present which may result in
electric shock. Refer any repairs to a
qualified service technician.
• Do not attempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible.
Installation precautions
Do not install components in areas
which are susceptible to rain, moisture,
direct sunlight, extreme heat or cold,
excessive dust, dirt or humidity.
Use only the installation parts and
hardware provided with the unit to
ensure proper installation. Using other
parts can cause malfunction and
possible damage to your Sound Storm
headphone system.
Use only a power source with 12 Volts
DC (negative ground).
Before final installation, temporarily
connect the wiring according to the
diagram near the end of this manual,
check it to ensure that it has been
connected properly, and test the unit
to make sure it is working correctly.
What is included?
The SHP-IR wireless infrared audio
system includes:
• Wireless audio transmitter
• (2) wireless headphones
The SHP is an additional set of
wireless headphones for use with
the SHP-IR system or Sound Storm
monitors with wireless infrared audio
transmission capability.
SHP-IR and SHP Headphone Controls and Features
SHP-IR • SHP User’s Manual - page 3
IR SENSORS
1
VOLUME CONTROL KNOB
2
POWER ON/OFF SWITCH
This button turns the headphone on
and off.
In addition, if headphones do not
receive any infrared audio signal after
a short period of time, they will shut
off automatically to conserve battery
life.
3
6
BATTERY COVER
See the section of this manual about
battery replacement for more details.
4
POWER LED
5
2
6
3
4
1
5
Using the wires provided, complete the audio, and power connections in your
vehicle as shown in the diagram below.
Be sure to locate the transmitter in a location and position within direct line-of-sight
of the location in the vehicle you plan to have passengers wearing headphones.
SHP-IR Transmitter Features
SHP-IR • SHP User’s Manual - page 4
SHP-IR
IR EMITTERS (AUDIO TRANSMITTERS)
1
1
MOUNTING HOLE
2
2 2
Using the wires provided, complete the audio, and power connections in your
vehicle as shown in the diagram below.
Be sure to locate the transmitter in a location and position within direct line-of-sight
of the location in the vehicle you plan to have passengers wearing headphones.
SHP-IR • SHP User’s Manual - page 5
System wiring: SHP-IR Transmitter
AUDIO/VIDEO
SOURCE
(DVD player,
video game, etc.
)
BLACK
to Chassis Ground
LEFT AUDIO
OUTPUT
RIGHT AUDIO
OUTPUT
WHITE
RED
RED
FUSE
12V
Battery
SHP-IR
The wireless headphones use (2) AAA batteries (not included), which are located
in one of the earphone housings.
To replace the batteries, follow the diagrams below. To conserve battery life, please
be sure to turn off the headphones whenever they are not in use, even though they
will turn off after a short period of interrupted IR reception. If you expect the
headphones to be unused for several days, remove and store the batteries.
SHP-IR • SHP User’s Manual - page 6
Installing or replacing headphone batteries
Lift battery door release latch.
Lift and remove battery door.
Insert two AAA type batteries (not
included). Be sure to note proper
polarity when installing the batteries.
SHP-IR • SHP User’s Manual - page 7
Several Sound Storm video monitors include a wireless infrared transmitter. The
transmitter sends a high-quality stereo signal which can be received the SHP
wireless infrared headphones.
The infrared signal is emitted from the large dark lens on the front of the monitor
console. Best sound will be obtained if you sit directly in front of the monitor within
about six feet. If you choose to sit to one side of the monitor, you can expect good
reception within 35º to the right or left of the monitor.
Using the SHP headphones with a Sound Storm Monitor
Troubleshooting
SHP-IR • SHP User’s Manual - page 8
Specifications
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
No audio present
in headphones.
Power cord is not
properly connected.
Audio input cables not
properly connected.
Audio input source is not
operating properly.
Batteries are dead.
Check that power connections
are properly made and all fuses
are in functioning condition.
Check all cables.
Replace or repair A/V source
(DVD player, video game, etc.)
Replace headphone batteries.
Sound is of poor
quality or has
interruptions and
dropouts.
Headphone is not being
used in direct line-of-sight
with the player or remote
IR sensor. Transmission
is best within 6 feet/35º
angle of IR sensor on the
monitor.
Move to a better location. If this
is not possible, consider a more
suitable location for the
transmitter.
All specifications subject to change without notice.
Transmission system
Carrier frequency
Modulation
Mode
S/N ratio
Channel separation
Distortion
Frequency response
Power source, headphones
Current consumption, headphones
Infrared light
2.3 MHz (left channel), 2.8MHz (right channel)
FM
Stereo
greater than 60 dB
greater than 40 dB
les than 1%
30Hz - 20kHz
(2) x AAA batteries
25 mA max (during play) / 15mA (muted)
SHP
Wireless Headphones
MODEL
SYMPTOM CAUSE REMEDY
SHP-IR
Wireless Headphones with IR Audio Transmitter
L A B O R A T O R I E S
®
Loading...