EE
44
10R-02121810R-021218
00
2
Contents
DVD
1
Before You Start
Installation
Common Operations
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
Wiring Connections 12
Install the Unit 13
Detach the Unit 14
Install the Front Panel 15
Detach the Front Panel 15
Reset the Unit 16
Turning the Unit On/Off 16
Volume Control 16
Setting the Sound Characteristics 16
EQ Setting 16
Turning Loudness On 16
Eject a Disc 17
Open the Monitor 17
Angle Setting 17
Mute Function 17
Clear 17
Mode Selector 17
Menu Setup Button 17
Infrared Sensor 17
Eject a Disc Compulsively 17
Playing a DVD 23
DVD Setup 23
Selecting Tracks Fast 23
Stop the Playback 23
Pause the Playback 23
23
Number Buttons 23
Repeat Playing 23
System Switch 24
Slow Motion Playback 24
Increase Picture Size 24
On Screen Display 24
Setting the Playback Time 24
Changing the Viewing Angle 24
Changing Audio Language 25
Changing the Subtitle Language 25
Selecting Menu 25
DVD Setup Menu 25
Skip Backward/Forward/F.F/F.REW the
Playback
5
Main Menu
Main Menu Setup 18
Audio Adjust 18
1
2
3
5
4
6
MP3/USB/SD
Playing a MP3/USB/SD Disc 32
Selecting Tracks Fast 32
Repeat Playing 32
Number Buttons 32
Stop Playing 32
Selecting Tracks 32
Pause the Playback 32
Skip Backward/Forward/F.F/F.REW the
Playback 33
On Screen Display 33
Exit an USB 33
Exit a SD Card 33
Video Adjust 19
Source Setup 19
Others 19
00
3
Contents
VCD/CD
Tuner
Playing a VCD/CD Disc 34
Selecting Tracks Fast 34
Repeat Playing 34
Playing Tracks at Random 34
Number Buttons 34
Stop Playing 34
Pause the Playback 34
Skip Backward/Forward/F.F/F.REW the
Playback 34
System Switch 35
Slow Motion Playback 35
Increase Picture Size 35
On Screen Display 35
Setting the Playback Time 35
Selecting Channel 36
Selecting Title 36
Program Playing 36
Listening to the Radio 39
Band Selector 39
Manual/Automatic Tuning 39
DX/LOC Selector 39
Selecting the Stored Station 39
MO/ST Selector 40
Scanning/Memorizing Stations
Automatically 40
Number Buttons 40
On Screen Display 40
7
9
10
Additional Information
Simple Troubleshooting Guide 41
8
MP4(AVI,MPEG4)
Basic Operation of MP4 37
Number Buttons 37
Stop the Playback 37
Pause the Playback 37
On Screen Display 37
Repeat Playing 37
Setting the Playback Time 37
Slow Motion Playback 37
Selecting Tracks Fast 38
Skip Backward/Forward/F.F/F.REW the
Playback 38
Playing Tracks at Random 38
Increase Picture Size 38
Changing Audio Language 38
Changing the Subtitle Language 38
10
41
Before You Start
IMPORTANT SAFEGUARDS
About this manual
Be sure to connect the color coded leads
according to the diagram. Incorrect connections may cause the unit to malfunct-
,
ion or damage the vehicle s electrical system.
Be sure to connect the speaker (-) leads
to the speaker (-) terminal. Never connect the left and right channel speaker
cables each other or to the vehicle body.
Make sure all the connections are completely correct before turning on your unit.
When replacing the fuse(s), the replacement must be of the same amperage as
shown on the fuse holder.
Do not block vents or radiator panels.
Blocking them will cause heat to build up
inside and may result in fire.
This unit features a number of sophisticated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MP4 operation
that can only be operated by the remote
control, there are also functions can be
operated by the buttons provided for
the main unit.
To
nstall the unit in an apt
place.
lest the driver distrack his attention
from, please i
Using the unit after starting the engine,
otherwise
the electric energy of battery was
used up.
the unit can not be started, be-
cause
The unit must be screened from direct
sunlight, or the
will be wasting for the high temperature.
electric energy of battery
Do not use the unit in extreme high temperature or such low temperature conditions, and also avoid humidity and direct
sunlight.
Take care of the magnetism of the unit.
Do no put the credit card, cassette or
watch around the unit, or they would be
broken or some information in them lose.
To lest disturb the video frequency, keep
far away from the unit when using your
phone.
Do not put the remote under high
temperature or where the sun strikes it,
or else the control remote can not work
normally.
control
12
1
2
3
4
5
6
7
8
9
10
11
Simple Troubleshooting Guide
No power.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Some errors occur in
LCD or no function
pressing the button.
the
when
Unable to receive stations.
Poor effect on receiving a
station.
CDs cannot be loaded.
Sound skips.
No images.
Images skip.
Press RESET button.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
The Video line from main unit to the TV is not
connected properly.
Improper setting of the color system. Set the color
system according to the
connected television.
to PAL or NTSC
.
.
.
Note:
If any of the problem persist after check list had been made, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
The following checklist might helped to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is properly before using the checklist .below
Problem
Cause/Solution
.
.
.
.
.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
.
Due to continuous product improvement, the operations
are subject to run the model.
Additional Information
01
5
Before You StartTuner
09
40
Type of disc
VCD
MP3
CD
NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.
DVD
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional cleaning cloth. Wipe each disc from the center out.
(Shown as the picture)
PRECAUTIONS
This unit can play the following discs only:
Label on the disc Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
Besides playing the discs above, the unit also can be connected to other connector.
Please refer to the details on page 19 before you playing them.
Scanning/Memorizing Stations
Automatically
During radio status, you can press AMS
button on the remote control to scan each
stored 5 seconds respectively which
Number Buttons (from 1 to .
You can press responding Number
Buttons or ton when your desired
station is And it starts playing that
station.
station
stored in 6)
the cor
AMS but
charged.
23
4
When press and hold AMS for
more than 2 seconds, automatically memory storing The
radio automatically selects and
has it stored in any one of Number
Buttons (from1 to 6).
button
it will activate
function.
a station
the
Note:
* The unit can be stored up to 6 stations
each band.
* Press in the monitor performs the
same function.
for
Number Buttons
During radio status, Number Buttons
(from 1 to 6) can help you your
favorite station. You can follow the
as below:
store
steps
Press AMS button to receive stations
automatically, and store them in 1 to 6
number respectively.
Press ST button on the remote control
MONO mode or STEREO
to
select mode.
MO/ST Selector
Stereo reception is charged when STEREO
appears. It is switched to mono mode when
MONO appears. ST OFF appears on
the display to switch to MONO compulsively.
It is only valid on remote control.
It is only valid in FM tuning.
23
During radio status, press Number
Buttons to receive the stored stations.
4
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number appears on the LCD, which indicates that
station is already stored in the corresponding number button.
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that
number button.
button
6
Switch to MONO compulsively to improve
the listening quality when week signal.
Note:
*
*
*
4
23
1
2
3
Press in the monitor performs the
same function.
Note:
*
On Screen Display
8
During radio mode, press OSD to
display the edition information and the
LCD display the current time.
Note:
*
It is only valid on remote control.
MPEG-4
Sound and moving
pictures
09
39
TunerBefore You Start
01
6
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the
fuses. If the fuse is blown, check the
power connection and replace with a
new one. If the same problem occurs,
it would be subjected to the malfunction.
In such cases, please consult to the
nearest service dealer.
When the range of the operation of the
card remote control becomes short or no
functions while operating. Replace the
lithium battery with a new button cell
(CR2025). Make sure the battery polarity
before replace.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Warning!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
!
Listening to the radio
DX/LOC Selector
During radio status, press LOC button
to select or weak station reception.strong
LOC ON appears on the display and
only local station is available. LOC OFF
appears on the display both distance and
local stations can be received.
5
The function is only valid on remote
control.
The function is invalid in AM tuning.
Note:
*
*
Band Indicator
Shows which band the radio is tuned
to.
1
Preset Number Indicator
Shows what preset has been selected.
2
Shows which frequency the tuner is
tuned.
Frequency Indicator
3
SEEK+/SEEK-
Briefly press to tune by the presettable
range, hold and press to tune automatically.
4
VOL+/VOL-
To increase or decrease the volume.
5
Selecting the Stored Station
During radio status, press button to
select the stored station upward, press to
select downward.the stored station
27
The function is only valid on remote
control.
Note:
*
6
BAND
To select the bands.
7
AMS
Briefly press to scan the current station,
hold and press to tune automatically.
8
MENU
Press this button to set the main menu.
9
SRC
Press this button to select the signal
source.
The 6 stations of the current band.
10
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
Note:
* Press BAND on the head unit or in
the monitor performs the same function.
FM2
AM2 AM1
FM3
FM1
During radio status, repeatedly press
BAND button to select bands in
lowing order:
the
fol
Band Selector
3
Manual/Automatic Tuning
Manual Tuning: ress ( button
on the remote control continuously to select
a or respectively.
Por )
station downward upward
Automatic Tuning: ress and
) button seconds, the ra-
dio a station
or respectively and plays when
it finds a station.
P hold ( or
for more than 3
automatically searches down-
ward upward
Press / on the head unit or in the
monitor performs the same function.
Note:
*
6
FM1 CH:1 87.50MHz
90.10M
98.10M 106.10M
107.90M
87.50M87.50M
01
7
Before You Start
08
38
Location of the Controls
The Expanding
The Whole
MP4(AVI,MPEG4)
Selecting Tracks Fast
Note:
Press ( or ) on remote control to
perform fast reward or fast forward. Each
press will change as the following
Skip backward/forward/F.F
/F.REW the playback
20
Note:
2X 4X 8 X 16X
* Press and in the monitor
performs the same function.
* Pressing and button on the head
unit or and in the monitor
the same function.
also
performs
Playing Tracks at Random
During MP4(AVI,MPEG4) playback,
RDM button on the remote control to
play random under the directory
which you select. P
press
any track at
ress it again to cancel
this function.
16
* The function is only valid on remote
control.
Note:
Changing audio language
(Multi-audio)
With MP4(AVI,MPEG4) disc featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
AUDIO 1 AUDIO 2 AUDIO 3
Selection options switch as follows:
* This function is operated by using
remote control.
the
* This function only operates with disc
featuring multi-audio recordings.
* The number in the mark on a
disc package indicates the number of
recorded languages/audio systems.
2
Note:
6
Changing the subtitle language
(Multi-subtitle)
With MP4(AVI,MPEG4) disc featuring
multi-subtitle recordings. You can press
SUB-T to switch between subtitle languages
during playback.
Subtitles 1
Subtitles 2
Subtitles OFF
Selection options switch as follows:
* This function is operated by using
remote control.
the
* This function only operates with disc
featuring multi-subtitle recordings.
* The number in the mark on a disc
package indicates the number of recorded
subtitle languages.
2
Note:
5
The function is only valid on remote
control.
Note:
*
To remove the image by pressing button.
*
27
During MP4(AVI,MPEG4) mode, Press
ZOOM to increase the picture in size. There
are different sizes and they are as follows.
Each pressing will increase the size til
it reaches the maximum.
Increase the size of the picture
9
No Change
2X 3X 4X
During MP4(AVI,MPEG4) playback, first
press to return to the beginning of
the current track, press again within
3 seconds to play previous track, press
to play next track.
21
21
21
POWERPOWER
VOLVOL
SRC
BAND
EJ
SD CARD
A/V IN
REL
EQ
MENUMENU
ANGLEANGLE
11
6
5
13
POWERPOWER
VOLVOL
MUTEMUTE
OPENOPEN
SRC
BAND
EJ
SD CARD
A/V IN
REL
EQ
1
18
4
20
7
12
14
17
10
15
16
8
3
19
2
08
37
Before You Start
01
8
MP4(AVI,MPEG4)
you any tracks directly by
( 0~9). The track
you selected will be played automatically.
can select using
Number Buttons
* This function is operated by using the
remote control only.
23
Number Buttons
Note:
Basic Operation of Mp4
Insert a MP4(AVI,MPEG4) disc into the slot,
the unit will automatically switch on, if a disc
is loaded, press SOURCE to start the
playback.
You can press EJ button on the head
unit to eject the MP4 disc.
1
Note:
*
Stop the playback
18
During MP4(A VI,MPEG4) playback, firstly
press to pause playing, then press
to play from the beginning of the disc, During
stop status, press pause to resume playing
state.
Pause the Playback
During playback,
press
MP4(AVI,MPEG4)
button to suspend the
playback, Press it again to return to
normal playback.
17
Note:
* Press in the monitor performs the
same function.
Note:
* Press on the head unit or in the
monitor performs the same function.
On Screen Display
Press OSD button the display shows:
8
8
Press and hold OSD LCD displays the
current time.
Note:
Single elapsed time
Single remain time
OFF
17
Repeat Playing
During MP4 (AVI,MPEG4) playback , press
ing RPT to perform replay function,
first press it to replay the current track,
press it again to cancel this function.
15
Note:
* This function is operated by using the
remote control.
REMOTE Infrared Sensor
RESET Button
VOL+/ VOL-/SEL
SOURCE/PWR
Briefly press to select the different modes
available, hold and press it to turn the unit
on or off.
Press it to insert or eject a disc.
BAND/ (band selector/play/pause) Button
(ANGEL-) Button
(ANGEL+) Button
EJ Button
[ / ]/[ / ]([Adjust frequency backward/Previous]/[Adjust frequency forward
/Next Track])
USB Socket
(MENU) Button
During playback mode, briefly press to set
DVD menu; During radio mode,briefly press
it to set the radio menu,hold and press it to
set the main menu.
Disc Loading Slot
(Back Space) Button
OPEN Button
MUTE Button
LCD Screen
A/V IN
REL (release the front panel) Button
SD Card Slot
The Base
During radio mode,press it to select the bands;
During playback mode,press it to play or
pause.
* This function is operated by using
remote control.
the
Note:
Slow motion playback
During MP4(AVI,MPEG4) mode, press
SLOW to slow forward or slow backward.
There are speeds as follow:
1/8
1/4 1/2
Note:
1/16
During MP4(AVI,MPEG4) playback, firstly
press GOTO, and monitor shows select
: --- , press your desired time of the playback
by using number buttons. and press ENTER
to set the status. Secondly press GOTO
button,and the monitor shows: -:--:--, input
your desired time, then press ENTER.
Setting the Playback Time
2
9
EQ (equalizer) Button
* This function is operated by using the
remote control only.
* This function is operated by using
remote control.
the
01
9
Before You Start
36
07
VCD/CD
Selecting Channel
During VCD status, repeatedly press
AUDIO button to select the following
channel:
6
Stereo
Mono Left
Mono Right
Selecting the corresponding channel to set
the different sound characters.
The function is only valid on remote
control.
Note:
*
3
27
23
PBC Selector
PBC playing confirms to version 2.0 or
above disc only.
Note:
*
Program Playing
During VCD/CD mode, press PROG, the
TFT displays the program menu. Pressing
NUMBER BUTTONS to select the track
Number and then press to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to and press ENTER to the
previous page; move the cursor to and
press ENTER to the next page.
During this process, press to cancel
the program playing.
13
18
The function is only valid on remote
control.
Note:
*
27
During VCD status, firstly press TITLE
button, the PBC playback starts and the menu
of entire disc appears on LCD. And then you
can select your desired track by using or
. When a track is playing, you can press
MENU to return to the menu, if you would
like to end the track and select others. To
cancel PBC playing, press TITLE button
again.
3
Remote Control
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
07
35
Before You Start
10
01
VCD/CD
During VCD mode, Press P/N on remote
control to switch to PAL or NTSC or AUTO
system.
System Switch
Note:
The function is only valid on remote
control.
*
Slow motion playback
During VCD mode, press SLOW to
slow forward or slow backward. There
are speeds as follow:.
1/8
1/4 1/2
The function is only valid on remote
control.
Note:
*
During VCD mode, Press ZOOM to
increase the picture in size. There are sizes
as follow, Each pressing increases the size
until the maximum size is reached.
Increase the size of the picture
9
The function is only valid on remote
control.
Note:
*
No Change
2X 3X 4X
On Screen Display
During VCD/CD status, brief press
OSD button the display shows:
8
Note:
Single elapsed time
Total
elapsed time
Total
remain time
Single remain time
OFF
* This function is operated by using
remote control.
the
Note:
To remove the image by pressing button.
*
27
8
Press and hold OSD to display the
current time.
SOURCE/PWR (mode switch/turn on of off)
AMS/MENU (preset stations,memory
automatically/menu)
BAND/TITLE (band selection/title menu)
LOC/SUB -T (long distant or local station
selection/region function/subtitle display)
ST/AUDIO (mono or stereo/language or
channel selector)
OSD (current display)
Briefly press it to display the current
information; press and hold it to adjust
the current setup
SLOW (Slow play)
ANGLE (play angle)
PROG(Program playing)
Mute
P/N( system adjusting)
ZOOM (to increase the picture)
GOTO (playing time/track)
RPT(Repeat Playing)
RDM (Playing Tracks at Random)
LOUD (loudness)
SETUP
(F.R/F .F)
CLEAR
0~9 (Number) Buttons
Eject Button
(Stop Playing)
(Pause/Play)
EQ (equalizer)
(Previous/Next Track)
VOL+/VOL-/SEL
ENTER
(Left/Right/Up/Down
ENTER)
1/16
The function is only valid on remote
control.
*
During CD playback, first press GOTO,
and TFT shows : disc go to:--:--,press your
desired time of the playback by using number buttons.
Secondly press GOTO button, track go to
:--:-- appears on TFT, also input your
desired numbers to play the current time of
your selection.
Setting the Playback Time
2
During VCD mode, press GOTO button
to set the playing time, when the TFT display : /disc time/track time/repeat
/time disp. Press [ ][ ] to select the
options, press ENTER to set the status.
Then press NUMBER BUTTONS to set
the current status.
track
2
23
01
11
Before You Start
34
07
VCD/CD
Playing a VCD/CD
Insert a VCD/CD disc into the slot, the unit
will automatically switch on, if a disc is
loaded, press SOURCE to start the playback.
Note:
Note:
Repeat Playing
During VCD/CD playback , press
ing
RPT
to perform replay function,first press it
to replay the current track, press it again to
cancel this function.
15
Playing Tracks at Random
During VCD/CD playback, RDM
button on the remote control to play
random under the directory which you
select. P
press
any track
at
ress it again to cancel this function.
16
¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ
Stop Playing
During VCD/CD playback, firstly
button then press or to replay, press
again to stop the playback.
Press
18
* This function is operated by using the
remote control.
* The default setting is Disc Repeat.
Note:
* This function is operated by using the
remote control.
Note:
Number Buttons
Press one of Number Buttons(0~9) to
select a track to play automatically.
23
* This function is operated by using the
remote control.
Note:
18
Note:
Pause the Playback
During VCD/CD playback, press to
switch between play and pause.
Note:
Press ( or ) on remote control to
perform fast reward or fast forward. Each
press will change as the following:
Skip backward/forward/F.F
/F.REW the playback
20
Note:
2X 4X 8 X 16X
* Press CLEAR to clear the mistake input.
22
You can eject a disc by pressing EJ
button on the base or on the remote
control or in the monitor.
* Press in the monitor or on the head
unit performs the same function.
*
* Press and in the monitor performs
the same function.
* Press in the monitor performs the
same function.
AM Tuner Section
DVD/VCD/CD Player Section
522-1620(KHz)
(Europe)
530-1710 (KHz)
(U.S.A.)
450KHz
32dBuV
VCD Signal System
AUTO/PAL/NT SC
60dB
55dB(1KHz)
1%
General
FM Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
50dB
30dB 1KHz
20 -10KHzHz
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without prior notice.
Specifications
Power Requirement
14.4V DC
(11-16V allowable)
Load Impedance
10dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.160x178 x 50
mm
(d/w/h)
Dimensions
Approx.2.3kgWeight
TFT Sizes
Approx.170 x 117.5x16.5
mm
(d/w/h)
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
Frequency Range
IF Range
Usable Sensitivity
(-20dB)
Signal-to-noise Ratio
Separation
Distortion
Max.Power Output
85W x 4
30~100Angle between
folded and unfolded
20Hz to 20KHz
Frequency Response
(Optional)
(Optional)
During VCD/CD playback, first press
to return to the beginning of the
current track, press again within
3 seconds to play previous track ,press
to play next track .
21
21
21
Selecting Tracks Fast
* Pressing and button on the head
unit or and in the monitor
the same function.
also
performs
06
33
Installation
02
12
MP3/USB/SD
Wiring Connection
Video Out 1
Rear Audio Out
Front Audio Out
Reverse Video
Input
(Grey line with
yellow head)
(Light Grey line with
red & white head)
(Dark Grey line with
red & white head)
(Brown line with
yellow head)
The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor
after braking the car, but the menu and RCA output are free of it.
If you do not want to use this function, connect it with the negative pole.
Do not connect the pink wire to the battery,otherwise it will use up the power of battery.
Note:
*
Video Out 2
(Grey line with
yellow head)
Subwoofer
(Brown line with
brown head)
2
Orange
Red
Yell ow
Black
Ignition Key
Negative Ground
Rear L
Speaker
Front L
Speaker
Green/Black
Green
White/Black
White
Brown
Pink
Violet/Black
Blue
Violet
Grey/Black
Grey
Parking Brake (-)
Illuminating
control
To power
Antenna
Rear R
Speaker
Front R
Speaker
4
1
Screw Hole
2
5
Output Plug(Male)
Wire Clip
3
Antenna Receptacle
Output Socket(Female)
Choke
Box
3
4
5
6
Antenna
On Screen Display
Hold and press OSD button to display
the current time.
Note:
This function is operated by using the
remote control only.
*
1
6
Fan Window
During MP3/USB/SD mode, Press ( or
) on remote control to perform fast reward
or fast forward. Each press will change as
the following
Skip backward/forward/F.F
/F.REW the playback
20
2 X
Note:
4 X
8 X 16 X
* Press and in the monitor performs
the same function.
Exit an USB
During USB mode, the main unit would
switch to SD or DISC mode, if the previous
status is SD or DISC, otherwise the main
unit would switch to TUNER mode when
exit the USB.
During other modes, the main unit will keep
the previous mode when exit the USB.
Exit a SD Card
Push SD card to exit it.
During SD mode, the main unit would
switch to USB or DISC mode, if the previous
status is USB or DISC, otherwise the main
unit would switch to TUNER mode when
exit the SD card.
During other modes, the main unit will keep
the previous mode when exit the SD card..
Reverse Trigger (+)
Constant 12 Volts
02
13
InstallationMP3/USB/SD
32
06
6
£pM4x3 &M5x5£p
7
Install the Unit
Main Parts List
Mounting Sleeve x1
Rear Mounting Bolt x1
Harness Rubber x1
4 Screws Each
Outer Trim Frame x 1
Connecting Wire x1
Steel Bar x 1
Installation Method DIN Front-Mount
Panel
To support the unit
Fire Wall
Bend these claws
outward for a tight fit,
if necessary.
Install Outer Trim Frame
Install twor M5x5 screws on both sides (left and right)
of the lock hook brackets
Install the unit with four M2 2 screws
* Press CLEAR to clear the mistake
input.
22
Playing a MP3/USB/SD Disc
Insert a MP3 disc into the slot, the programs
in the disc will be played, if a MP3 disc is
loaded, press SOURCE to start the playback.
Note:
Selecting Tracks Fast
27
Note:
During MP3/USB/SD playback, press
to play the previous track, Press
to play next track.
27
Repeat Playing
During MP3/USB/SD playback , press
replay the current track, press it
again to cancel this function.
RPT to
15
* This function is operated by using the
remote control.
Note:
* The default setting is single Repeat.
18
¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ
Stop Playing
During MP3/USB/SD playback, Press
to stop the playback.
Number Buttons
Press one of Number Buttons(0~9) to
select a track to play automatically.
23
* This function is operated by using the
remote control.
Note:
18
Note:
* This function is operated by using the remote
contro only.
Note:
* Press in the monitor performs the
same function.
Pause the Playback
During MP3/USB/SD playback, press
to switch between play and pause.
Note:
* Press in the monitor or on the head unit
performs the same function.
When playing a disc included PIC file, first
press ,then press [ ][ ] to select the
option.
Insert an USB into the slot, the programs
in the USB will be played, if there has an
USB, press SOURCE to start the playback.
Insert a SD card into the slot, the programs
in the card will be played, if there has SD
card, press SOURCE to start the playback.
After inserts USB or SD must wait for 20
seconds to be able to eject the disc.
*
Selecting Tracks
During MP3/USB/SD mode, firstly press
GOTO and the TFT shows:---. Then
press NUMBER BUTTONS to input
the track s Number to play it ; secondly
press GOTO button, and the TFT shows :
--:-- ,now input the desired time to play
the current track at this point.
2
23
You can eject a disc by pressing EJ
button on the base or on the remote
control or on the monitor.
*
* Pressing and button on the head
unit or and in the monitor
the same function.
also
performs
05
31
DVDInstallation
14
02
Install the Unit
Bracket supplied
to your car
Dashboard
or Console
Detach the Unit
2. Screw the 4 screws, pull the head unit
out.
1. Remove the outer trim frame.
Select a position where the screw holes of
the mounting bracket lied with the car and
the of the main unit
fitted), and at 2
places on each fasten them to
the car.
supp
screw holes become aligned
(are tighten the screws (see
side). And then
4
Note:
Outer Trim Frame Mounting Sleeve
are not used
and
for installation method.
Installation Method
Installation using the screw holes at
sides of the unit.the
5
1
---Preferences page--
Default
Example showing how to set load factory setting:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Load Factory Setting
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Reset
02
15
DVD
30
05
Installation
Install the Front Panel
Put notch (shown as picture) onto shaft
.And then slightly press into the right side.
B
A
Detach the Front Panel
Press REL button in the upper rightcorner,
and then the front panel will be folded down.
---Preferences page--
Disc Menu
Example showing how to set Disc Menu Language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Preferred Menu Language
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Parental
Example showing how to set parental control:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Set Parental Control
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Password
Example showing how to set password, and the default password is 8888.
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Change Password
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Change
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
R
NC 17
Adult
English
French
Spanish
Chinese
Japanese
Russian
Thai
Korean
B
A
05
29
DVDCommon Operations
16
03
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
VOL
TRE
BAS
BAL
Setting the Sound Characteristics
Press VOL+ button to increase
sound level and press VOL- button to
decrease sound level.
the
the
Repeatedly press SEL button to select
the mode in the following order:desired
Volume Control
* Rotating on the head unit also performs
the same function.
* Pressing button and rotating it on the
unit also performs the same function.head
Note:
* When ome errors occur on the
also press RESET
it will
s display,
you can button to resume
to normal,and erase the clock setting
and some memorized functions.
* This function can only be operated by the
head unit.
Release the front panel at first, and then
Press RESET button in the panel w
object, (such as a ball
the unit to initial status.
ith
a pointed point pen)
to set
9
Turning the Unit On/Off
Press PWR button to turn on the unit,
press it again, the unit is still in waiting
status. When insert a disc, unit will
automatically start playing. Keep pressing it
more than 0.5 seconds to turn off the unit
completely.
the
the
1
* Pressing PWR button on the head unit
also performs the same function.
Note:
14
14
Note:
14
After selecting the desired mode, you
adjust the current level by pressing
.
can
VOL
buttons
Note:
7
7
* During playback status, it will play
automatically after inserting a disc.
EQ Setting
Repeatedly pressing button to choose
the following modes turn:
EQ
in
While listening to the popular music, classic
music or rock music, you select the
corresponding preset modes to adjust the
sound quality ing EQ
button.
can
perfectly by us
POP
CLASSICAL
OFF
* This function is operated by using the
remote control only.
3
Note:
26
The default setting is OFF.
¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ
Turning Loudness On/Off
Pressing
You can this button to
increase the low quency, which can
improve sensi ty for ears. Pressing
it again to stop this function.
LOUD button
press
fre
tivi your
activates this
feature.
25
Note:
FAD
14
ROCK
26
---Preference page---
TV Type
Example showing how to set TV type:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Set TV Standard
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
PAL
Auto
Audio
Example showing how to set Audio language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Preferred Audio Language
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Subtitle
Example showing how to set subtitle language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Preferred subtitle Language
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
NTSC
English
French
Spanish
Chinese
Japanese
Russian
Thai
Korean
English
French
Spanish
Chinese
Japanese
Russian
Thai
Korean
* This function is operated by using the
remote control only.
03
17
DVD
05
28
¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ
Eject a Disc
Press EJ button to eject or insert a disc.
Note:
* Briefly Pressing on the remote control
also performs the same function.
Open the Monitor
Press OPEN button to slant the monitor
or telescopes into.
Note:
* Keep pressing on the remote control
also performs the same function.
* The unit is running after the monitor
telescopes into.
Press and to adjust the best
position of the monitor. Press to adjust
monitor backward by definite angle, press
to adjust it forward.
Angle Setting
5
* When adjusting the monitor angle, please
press this button, or the monitor would
be broken.
6
Note:
* This function is only operated by using
the head unit.
Press button to shut off sound
output. And appears on the LCD.
Press it again to resume to previous volume
level.
the
Mute Function
Pressing MUTE on the head unit also
performs the same function.
12
Note:
*
Clear
If input some wrong selection, press
CLEAR button to clear it.
22
This function is only valid on remote
control .
Note:
*
Mode Selector
* Briefly pressing SOURCE on the head
unit also performs the same function.
Receptor on the head unit for the remote
control.
Infrared Sensor:
Note:
Repeatedly briefly pressing SOURCE
button to select the different modes available.
1
8
1
9
During MAIN MENU SETUP/DVD MENU
mode, briefly press SETUP to turn on or
turn off DVD Menu,press and hold it to turn
on or turn off Main Menu Setup.
Menu Setup Button
Common Operations
During playback, if it can not be played
normally or the disc can not eject, briefly
press SOURCE button to switch to the
radio mode, hold and press the EJ button
3 seconds, the disc will be eject.
Ejecting a stuck Disc
--Dolby Digital Setup--
Dual Mono
(Press
(Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dual Mono
Dynamic
Dual Mono (1+1) Setup
Stereo
L-Mono
--Dolby Digital Setup--
R-Mono
Mix-Mono
Dynamic
(Press
(Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dynamic
Set DRC off
--Dolby Digital Setup--
1 4
1
2
3
4
Dual Mono
--Dolby Digital Setup--
Dual Mono
Example showing how to set stereo mode:
(Press
(Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dual Mono
Dynamic
Dual Mono (1+1) Setup
Stereo
L-Mono
--Dolby Digital Setup--
R-Mono
Mix-Mono
Dynamic
Example showing how to set dynamic range compression:
(Press
(Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dynamic
Set DRC off
--Dolby Digital Setup--
1 4
1
2
3
4
Dual Mono
Press MENU on the head unit to turn
on the DVD Menu and Main Menu, and
press to back out the previous menu.
Note:
*
05
2718
04
Set up Main Menu
1.Audio Adjust
--General Setup Page--
Captions
Example showing how to set captions on/off:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Closed Captions
Off
On
Screen Saver
Example showing how to set Screen Saver on/off:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Screen Saver
On
Off
When the unit is on, the monitor will display
the menu as follows:
Hold and press SETUP on the remote control
or MENU on the head unit, or press MENU
in the monitor to enter the menu as follows:
* Press and hold SETUP or press MENU
on the head unit to set up this menu;
press the monitor to select the option.
This menu includes AUDIO, VIDEO,
SOURCE, SYSTEM, EXIT. Press them in
the monitor to set the desired status.
Note:
After selecting AUDIO, the sub menu will
appear as follows:
You can adjust VOLUME, BALANCE, FAD
BASS, TREBLE, For example, press FAD,
the setting menu will appear as follow:
Press and to adjust the desired FAD
level, press EXIT to exit this menu.
Note:
* Adjusting the other options perform the
same operation.
FM1 CH:1 87.50MHz
87.50M
90.10M
98.10M 106.10M
107.90M
87.50M
DVDMain Menu DVDMain Menu
04
19
Main MenuDVD
26
05
19
2.Video Adjust
--General Setup Page--
TV Display
Example showing how to set TV Display mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Set TV Display mode
Normal/PS
Normal/LB
Wide
Angle Mark
Example showing how to set picture mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Set Angle Mark
On
Off
OSD Lang
Example showing how to set language mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Set OSD Language
After selecting VIDEO, the sub menu will
appear as follows:
In this menu you can adjust CONTRAST,
COLOR, TINT, BRIGHT, PICTURE, EXIT.
Picture Adjust
Press PICTURE in this menu, it will appear
as follows:
Press and to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
Note:
* Adjusting the other options perform the
same operation.
3.Source Adjust
In the main menu, press SOURCE in the
monitor, the sub menu will appear as follows:
You can adjust RADIO , AUX , DVD and
TV to ON or OFF, press the corresponding
button to set.
If one of them was set OFF, that function is
null. For example, to set the AUX OFF, press
SOURCE can not activate AUX function.
But can not set the current playback OFF.
4.System Adjust
After selecting SYSTEM, the sub menu will
appear as follows:
In this menu you can adjust CLOCK
SYSTEM, KEY BEEP, MONITOR FLEX
and so on.
Note:
*
If the item can not be set "ON", then this
model does not contain this function.
OFF
English
French
German
Spanish
Italian
Dutch
Portuguese
05
25
DVDMain Menu
04
20
Changing audio language
(Multi-audio)
DVD s can provide audio playback with
different language. With featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
DVD s
AUDIO 1 AUDIO 2 AUDIO 3
Selection options switch as follows:
* This function is operated by using
remote control.
the
* This function only operates with DVD's
featuring multi-audio recordings.
* The number in the mark on a
DVD's package indicates the number of
recorded languages/audio systems.
2
Note:
6
Changing the subtitle language
(Multi-subtitle)
With featuring multi-subtitle recordings. You can press SUB-T to switch
between subtitle languages during playback.
DVD s
Subtitles 1
Subtitles 2
Subtitles OFF
Selection options switch as follows:
* This function is operated by using
remote control.
the
* This function only operates with DVD's
featuring multi-subtitle recordings.
* The number in the mark on a
DVD's package indicates the number of
recorded subtitle languages.
2
Note:
5
Briefly press on remote control
or briefly press MENU on the head unit,
main menu and sub-menu will appear on TFT,
pressing [ ][ ][ ][ ] on remote control
SET UP
to select your desired items, then press
ENTER on remote control to confirm. Press
to back out. Press / on the head
unit to chooses left or right direction.
* The selections are the preferred options
that will be chosen if they are available
on a disc.If the disc that is inserted does
not have the preferred option then the
discs own preference will be used.
* Regarding SETUP MENU, please refer
to the following pages for more details.
* Some functions varies depending on the
types of models or formats of the disc.
DVD SETUP MENU
Selecting MENU
Selecting Menu: During DVD status,
press MENU to return to the root
menu, all of the chapters will appear
on monitor. You can press or
button to select your desired chapter.
4
27
23
Selecting Title: During DVD status,
press TITLE to return the title menu,
all of the titles will appear on monitor.
You also can press or button to
select your desired chapter.
3
1
2
The function is only valid on remote
control.
Note:
*
Notes:
27
23
EXIT
Clock System
Press CLOCK SYSTEM in the monitor to
set 12 HOUR or 24 HOUR in this menu.
Key Beep
In this menu you can adjust KEY BEEP,
press it in the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.
Monitor Flex
In this menu you can adjust MONITOR
FLEX, press it in the monitor and select
MANUAL or AUTO, the default setting is
AUTO, it means the monitor will flex automatically.
Next Setup
Press to display the menu follows, press
to display the previous one.
Setting REVERSE POLA in this menu.The
signal is +12V when you are backing up a
car, please press BATTERY in the monitor;
if the signal is 0V, please press GROUND.
Reverse Pola
Subwoofer
In this menu you can adjust SUBWOOFER,
press it in the monitor and select ON or OFF,
the default setting is ON.
04
21
Main MenuDVD
05
24
During playback mode, Press P/N on
remote control to switch to PAL or NTSC
or AUTO system.
System Switch
NTSC
PAL
AUTO
The function can be operated by selecting
the DVD MENU SETUP.
Note:
*
Slow motion playback
During DVD mode, press SLOW to
slow forward or slow backward. Here are
the speeds for this feature:
The function is only valid on remote
control.
Note:
*
During DVD mode, Press ZOOM to
increase the picture in size.
Each press increases
the size until the maximum is reached.
Here are the
speeds for this feature.
size
Increase the size of the picture
9
No Change
The function is only valid on remote
control.
Note:
*
On Screen Display
During DVD status, press OSD button
the display shows:
8
8
Press and hold OSD to display the current time.
Note:
1/2
1/8
1/4
1/4
1/2
1
/
8
2X 3X 4X
Title elapsed time
Chapter
elapsed time
Chapter
remain time
Title remain time
OFF
* This function is operated by using
remote control only.
the
Note:
ANGLE 1 ANGLE 2 ANGLE 3
Changing the viewing angle
(Multi-angle)
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press ANGLE to switch among
viewing angles during playback.
Selection options switch as follows:
* This function is operated by using
remote control only.
the
* This function only operates with DVDs
featuring multi-angle recordings.
* The mark on a DVD's package
indicates it features multi-angle scenes.
The number in the mark indicates
the number of angles from which scenes
were shot.
* It is invalid to pressing ANGLE during
fast forward/fast reverse or pause.
3
7
Notes:
3
This function is operated by using the
remotecontrol only.
*
To remove the image by pressing button.
*
27
Press to display the menu follows, press
to display the previous one.
To set the above options as the same
operation.
LOCAL AREA
LOCAL
GOTO FREQ
EXIT
EUROPE
U.S.A
FM ONLY
AMS Fullup
In this menu to set the modes of AMS. When
the setup is ON, the presettable stations are
full, When you
select OFF, it will searching continually.
no new one's can be added.
Local Area
You can select EUROPE or USA to search
the stations quickly by your current area,
also, you can select FM ONLY to receive the
FM stations only.
LOCAL AREA
LOCAL
GOTO FREQ
EXIT
LOCAL AREA
LOCAL
GOTO FREQ
EXIT
Local
In this menu to search the LOCAL stations,
when selected ON, the strong signal local
stations can be received, when selected OFF,
the week signal out-of-town stations may
be received.
Goto FREQ
To select ON, you can using GOTO button
on the remote control to select a station s
frequency directly in radio mode.
1/16
1
/
16
DVD Playback Setting
During DVD mode, press GOTO button
to set the playing time, when the TFT display : /chapter/audio/subtitle/angle
/title time/chapter time/repeat /time disp.
Press [ ][ ] to select the options, press
ENTER to set the status. Then press NUM-
BER BUTTONS or [ ][ ] to set the
current status.
title
2
05
23
DVDMain Menu
04
22
Playing a DVD
Insert a DVD disc into the slot , the unit
will automatically switch on, if a DVD disc
is loaded, press SOURCE to start the playback.
Note:
At the beginning of playing DVD, the
monitor will display the menu as follows:
This menu appears by touch the monitor.
Note:
*
DVD SETUP
During DVD playback, select AV SET will
appear the following menu:
For more details please refer to pages 18
to 19.
Note:
*
To adjust VIDEO ADJUST, a DVD
and played normally at first.
should
be inserted
*
Note:
(Picture 1)
(Picture 2)
Press in picture 1 or press in picture 2
to enter the following menu:
Adjust Screen
Press ADJUST SCREEN to display the
above menu, there are a square button in the
top left corner and a tip: please press the
button. Press the square button at place ,
then the button will move to place , press
it at place , it will move to place , then
place , press SAVE at last.
Clock Adjust
Press CLOCK ADJUST in the monitor to
adjust the clock.
Stop the playback
During DVD playback, firstly press ,
then press or on the remote control to
replay.
Press twice to quit playing completely.
14
* Press and in the monitor
performs the same function.
Note:
During DVD playback, press to switch
between play and pause; During stop mode,
press this button to resume playback mode.
Pause the Playback
17
Note:
Press ( or ) on remote control to
perform fast reward or fast forward. Each
pressing will change as follow:
Skip backward/forward/F.F
/F.REW the playback
20
16X
2X
4X
8 X
Note:
* Press and in the monitor also
performs the same function.
* Press in the monitor or on the head
unit performs the same function.
Press one of Number Buttons(0~9)
to select a track, it will be played automatically.
23
* The function is only valid on remote control.
Number Buttons
Note:
* Press CLEAR to clear the mistake input.
22
Repeat Playing
During DVD playback , press
ing
RPT
on the remote control to perform replay
function as followings:
* This function is only valid on remote
control.
* The default setting is Disc Repeat.
15
Note:
Chapter
Title
Off
Selecting Tracks Fast
During DVD playback, first press
to return to the beginning of the current
track, press again within 3 seconds
to play previous track ,press to play
next track .
21
21
21
You can eject a disc by pressing EJ
button on the base or on the remote
control or in the monitor.
*
* Pressing and button on the head
unit or and in the monitor
the same function.
also
performs
Loading...