SoundScope Pro-Tect iHunt Operation Manual
OPERATION MANUAL
soundscope pro-tect iHunt
1
OPERATION MANUAL
soundscope pro-tect iHunt
2
OPERATION MANUAL
soundscope pro-tect iHunt
table of contents
Your personal protectors ............................................4
Protect your hearing ....................................................6
Identification .............................................................. 7
Batteries .................................................................... 8
Inserting and removing the batteries ........................ 10
On/Off and volume levels ......................................... 12
Memory settings ....................................................... 14
Taking care of the protectors ................................... 15
Cleaning the protectors ........................................... 16
Avoid dampness ...................................................... 16
Storage ................................................................... 17
Service and repairs ................................................. 17
Problem solving guide ............................................. 18
Accessories for signal monitoring ............................. 19
Technical overview ................................................... 20
General information EU ............................................ 21
Manufacturer details ................................................. 22
OPERATION MANUAL
soundscope pro-tect iHunt
3
4
OPERATION MANUAL
soundscope pro-tect iHunt
your personal protectors
These individual manufactured reusable level dependent/active
hearing protectors are class 2 personal protector devices.
Soundscope pro-tect iHunt is constructed to be used during
hunting and has been designed to give good protection
against strong impulse sounds such as shots from hand held
guns, e.g. rifles, hand guns.
Soundscope pro-tect iHunt is not designed for being used
against continuous noises, e.g. in an industrial environment.
To ensure you that you get the most use of your protectors,
please read the user instruction, follow all instruction in it
and listen to advice from your dealer. Failure to follow those
instructions and advice may severely impair the protection
provided by your protectors.
OPERATION MANUAL
soundscope pro-tect iHunt
5
1. Volume control/On and Off
2. Battery compartment
3. Memory switch
4. Sound channel with Hear Clear wax filter
5. Microphone
1
4
5
2
3
6
OPERATION MANUAL
soundscope pro-tect iHunt
protect your hearing
It is important you are using your protectors all the time
when using guns. Remember that soundscope pro-tect
iHunt is purely classed as a hunting hearing protecting
device and can not be used in other noisy environments.
Correct usage will strongly reduce, but not fully eliminate
the risk to injure your hearing due to gun noise and/or other
noise.
Frequent controls of your hearing is recommended in order
to be able to follow eventual changes of your hearing.
Hearing impairment may occur due to many reasons such
as sickness, medication, natural aging and/or exposure to
noise/strong sounds.
OPERATION MANUAL
soundscope pro-tect iHunt
7
identification
Each protector is identified by product name, serial number
and the initial of the user, which are all placed on the outside
of the shell.
You differentiate both sides by blue shell for left side and
right shell for right side.
Model name
Initials
Serial number
8
OPERATION MANUAL
soundscope pro-tect iHunt
batteries
Your protectors use battery size 13 (orange). It is important
that you use the right size and type of battery for your
protectors. Battery size 13 may be recognized by the number
13 and/or the orange colour on the battery package.
Due to its size, it is recommended that you change battery
over a table in order not to drop your protector and/or the
battery.
Note: In the protectors there is an tone that indicates when it
is time to change battery.
change batteries
1. Open the battery compartment with the nail grip on the
edge an pull carefully outward.
2. Used batteries are removed by pushing battery upwards.
DO NOT push the battery against the side of the battery
compartment.
3. Remove the tab in order to activate the battery.
4. Place the new battery in the compartment with the plus
marking (+) upwards.
5. Close the battery compartment properly. The door
snaps through with a little ”click”. Do not use more than
necessary strength to close the door since it may cause
damage to your protectors.
Loading...