Page 1
60W RGBW 4in1 LED Moving Head
with Infinite PAN/TILT Movement
USER MANUAL
Please read this manual carefully and proper take care of this manual.
Page 2
Dear customer,
First of all thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy
all possible needs of musical instrument, professional audio and lighting users offering
a wide range of products using the latest technologies.
We hope you will be satised with this item and, if you want to collaborate, we are
looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.
com and send an e-mail with your opinion, this will help us to build instruments ever
closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect operation
can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
TABLE OF CONTENTS
1. 1. INTRODUCTION ....................................................................................................5
2. OVERVIEW .................................................................................................................. 6
3. MAIN FEATURES ........................................................................................................6
4. FRONT/REAR PANELS ...............................................................................................6
5. MENU OPERATING INSTRUCTION ..........................................................................7
6. OVERHEAD RIGGING ................................................................................................7
7. MAINS CONNECTIONS .............................................................................................8
8. DMX CONNECTION ................................................................................................... 8
9. DMX Channel Chart ................................................................................................10
10. TROUBLESHOOTING ...............................................................................................12
11. Maintenance ............................................................................................................12
12. SPECIFICATIONS ......................................................................................................13
13. WARRANTY AND SERVICE .....................................................................................14
14. WARNING.................................................................................................................14
Page 3
TWILIGHT 60 ENDLESS User manual
IMPORTANT SAFETY SYMBOLS
The symbol is used to indicate that some hazardous live terminals are
involved within this apparatus, even under the normal operating con-
ditions, which may be sufcient to constitute the risk of electric shock
or death.
The symbol is used in the service documentation to indicate that spe-
cic component shall be replaced only by the component specied in
that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off
WARNING:
CAUTION:
0.5m
Describes precautions that should be observed to prevent the danger
of injury or death to the operator.
Describes precautions that should be observed to prevent danger of
the apparatus.
To protect the environment, please try to recycle the packing material
as much as possible
The projector is for indoor use only, IP20. Use only in dry locations.
Keep this device away from rain and moisture, excessive heat, humid-
ity and dust. Do not allow contact with water or any other uids, or
metallic objects.
Don’t throw this product away just as general trash, please deal with
the product follow the abandon electronic product regulation in your
country.
Locate the xture in a well ventilated spot, away from any ammable
materials and/or liquids. The xture must be xed at least 50cm from
surrounding walls
ENGLISH
TAKING CARE OF YOUR PRODUCT
f Read these instructions
f Keep these instructions
f Heed all warning
3
Page 4
ENGLISH
TWILIGHT 60 ENDLESS User manual
f Follow all instructions
Water / Moisture
The apparatus should be protected from moisture and rain and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
Condensation
To avoid condensation to be formed inside, allow this unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance or may even cause damages.
Heat
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat. Don not use it when maximum ambient temperature is higher than 40°C.
Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always
install according to the manufacturer’s instructions.
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
Power Cord and Plug
Protect power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. Do not defeat the safety
purpose of the polarized or grounding-type plug. A polarized plug has two poles; a
grounding-type plug has two poles and a third grounding terminal. The third prong is
provided for your safety. If the provided plug does not t into your outlet, refer to an
electrician for replacement. Unplug the unit when it is not used for a longer time.
Power Supply
In case of external power supply, the apparatus should be connected to the power supply only of the type as marked on the apparatus or described in the manual. Failure to
do could result in damage to the product and possibly the user. Unplug this apparatus
during lightning storms or when unused for long periods of time.
Electrical Connection
Always disconnect from the power source before servicing or replacing fuse and be
sure to replace with same fuse size and type. Cut off power before moving, repairing
and cleaning the unit. Improper electrical wiring may invalidate the product warranty.
4
Page 5
ENGLISH
TWILIGHT 60 ENDLESS User manual
To avoid electric shock, all xtures must be connected to circuits with a suitable ground.
Do not power on and power off the xture in a short time.
DMX connection
When use DMX controller, please make sure that there is no interference sources (e.g.
intercom, high frequency radio waves and radiation source).
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
Servicing
Do not implement any servicing other than those means described in the manual. Refer
all servicing to qualied service personnel only. Only use accessories/attachments or
parts recommended by the manufacturer.
1. 1. INTRODUCTION
Thank you for purchasing our TWILIGHT 60 ENDLESS moving head. Enjoy your new
equipment and make sure to read this manual carefully before operation!
This user manual is made to provide both an overview of controls, as well as information on how to use them. In order to help you to understand the connections between
the various controls, we have gathered in groups according to their functions.
1.1. UNPACKING
Your TWILIGHT 60 ENDLESS was carefully packed to ensure safe transport. Despite this,
we recommend you to carefully examine the package and its contents for any signs of
physical damage, which can occur during transport. It is composed by following parts:
f Moving Head
f Power Cord
f Clamp
f User manual
ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep
in a safe place the original packaging material for future use.
1.2. ACCESSORIES
SOUNDSATION can supply a wide range of quality accessories that you can use with
your TWILIGHT 60 ENDLESS moving head, like Cables, Splitters, DMX controllers, and a
wide range of other xtures.
5
Page 6
ENGLISH
TWILIGHT 60 ENDLESS User manual
All products in our catalogue has been long tested with this device, so we recommend
you to use Genuine SOUNDSATION Accessories and Parts.
Ask your SOUNDSATION dealer or check out our website www.soundsationmusic.com
for any accessories you could need to ensure best performance of the product.
2. OVERVIEW
This LED spot moving-head of TWILIGHT Series combines the benets of LED technology (energy saving, low heat emission, increased reliability and durability over time) with
the quality of digital control systems and the accuracy of its mechanics. The TWILIGHT
60 ENDLESS is, therefore, a tool suitable for professionals of entertainment, both in
touring and xed installations.
The light source consists of 1 high-brightness RGBW 4in1 LEDs, capable of emitting a
beam of 30,000 LUx @ 1m. The front lens, with 4° opening, ensures optimal mixing of
the four base colors, thus obtaining an extremely smooth and concentrated light beam.
PAN and TILT movements are equipped with high-precision motors and 8/16bit digital
control. In addition to the traditional PAN-TILT movements at 540 ° and 270 °, you can
use 360 ° endless motion, creating dynamic effects that are highly appreciated in both
live and disco applications.
The chassis is largely made up of aluminum and allows to reduce the nal weight in just
3.3kg. The xture is available both in single carton and in 4-unit professional ight case.
3. MAIN FEATURES
f LED: Ultra-bright 60W RGBW 4in1 LED
f Lux: 30.000 @ 1m
f Beam angle: 4°
f PAN-TILT: 540° / 280° + Endless function
f Stand-alone, DMX, Master/Slave modes
f 14CH / 16CH DMX modes
f Lightweight yet tough housing
4. FRONT/REAR PANELS
1 2
1. MENU: Used to select different menu items.
6
3
ENTERMENU DOWN UP
4 5
MADE IN CHINA
MIC
Page 7
1
TWILIGHT 60 ENDLESS User manual
2. DOWN: To go back in the menu and to lower values shown on the display.
3. UP: To go up in the menu and to increase values shown on the display.
4. ENTER: Used to conrm your choice.
5. Microphone: It receives audio signal
AC100-240V 50/60HZ
OUTPUTINPUT
FUSE F3A - 5x20mm
ENGLISH
6
7
8
6. DMX input: 3PIN male XLR connector for DMX communication
7. DMX output: 3PIN female XLR connector for DMX communication
8. Power Input: Power input cable
9. Fuse: In case of electric failure, it burns. To prevent the risk of re and damaging the unit,
please use only of the recommended fuse type as described in the manual. Before replacing
the fuse, make sure the unit turned off and disconnected from the AC outlet.
5. MENU OPERATING INSTRUCTION
With the help of the LED display, it’s very easy to set up and change operating mode.
d512
ENTER
UP / DOWN
A001-A512
Auto
Sound
HAnd
CHAn 16CH
Inv PAn 0
Auto 1
Auto 2
SU 1
SU 2
CH01
CH02
CH16 000-255
14CH
DISP 0
TILt 0
000-255
000-255
1
1
6. OVERHEAD RIGGING
WARNING: The installation must be carried out by qualied service personal
only. Improper installation can result in serious injuries and /or damage to
property. Overhead rigging required extensive experience! Working load
limits should be respected, Certied installation materials should be used,
7
Page 8
ENGLISH
TWILIGHT 60 ENDLESS User manual
the installed device should be inspected regularly for safety.
• Make sure the area below the installation place is free from unwanted persons
during rigging, de -rigging and servicing.
• Locate the xture in a well ventilated spot, far away from any ammable materials
and/or liquids. The xture must be xed at least 50cm from surrounding walls.
• The device should be installed out of reach of people and outside areas where
persons may walk by or be seated.
• Before rigging, make sure that the installation area can hold minimum point load
of 10 times the device”s weight. The device should be well xed; a free swinging
mounting is dangerous and may not be considered!
• Do not cover any ventilation opening as this may result in overheating
• Before the rst time use, it must be inspected by professional staff to make sure
safety, inspection regularly every year.
7. MAINS CONNECTIONS
Connect the device to the mains with the supplied power cable. Please note that power
voltage and frequency are the same as the marked voltage and frequency of device
when connecting power.
Every device’s power should be connected separately, so that device can be controlled
individually. To prevent the risk of re and damaging the unit, please use only of the
recommended fuse type as described above. Before replacing the fuse, make sure the
unit turned off and disconnected from the AC outlet.
Wire correspondence is as follow:
Cable (EU) Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth must to be connected! Pay attention to the safety! Before taking
into operation for the rst time, the installation has to be approved by an
expert.
8. DMX CONNECTION
DMX xtures are designed to receive data through a serial Daisy Chain. A Daisy Chain
connection is where the DATA OUT of one xture connects to the DATA IN of the next
xture. The order in which the xtures are connected is not important and has no effect
8
Page 9
ENGLISH
TWILIGHT 60 ENDLESS User manual
on how a controller communicates to each xture. Use an order that provides for the
easiest and most direct cabling.
DMX Termonator
Unit 1 Unit 2 Last Unit
DMX 512
Connect xtures using shielded 2-conductor twisted pair cable with 3-pin XLR male to
female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-), and
pin 3 is Data positive (S+).
DMX use of 3-Pin XLR Connectors
3-Pin XLR
Pin 1: GND
Pin 2: DMX -
Pin 3: DMX +
OUTPUTINPUT
CAUTION: Wires must not come into contact with each other; otherwise the
xtures will not work at all, or will not work properly.
8.1. DMX Terminator
DMX is a resilient communication protocol, however errors still occasionally occur.
In order to prevent electrical noise from disturbing and corrupting the DMX control
signals, a good habit is to connect DMX output of last xture in the chain to a DMX
terminator, especially over long signal cable runs.
The DMX terminator is simply an XLR connector with a 120Ω (ohm),
DMX Terminator
120ohm, 1/4W
1/4 Watt resistor connected across Signal (-) and Signal (+), respectively, pins 2 and 3, which is then plugged into the output socket on last
projector in the chain. The connections are illustrated below.
Complimentary signal cable can transmits signals to 20 unit xtures at most.
Signal amplier is a must to connect more xtures.
8.2. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and xtures manufacturers are not
resistor
9
Page 10
ENGLISH
TWILIGHT 60 ENDLESS User manual
standardized around the world. However, two are the most common standards: 5-Pin
XLR and 3-Pin XLR system. If you wish to connect TWILIGHT 60 ENDLESS to a 5-Pin XLR
input xture, you need to use an adapter-cable or make it by yourself.
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket stan-
dards
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
9. DMX Channel Chart
There are two modes to get DMX 512 signal for this xture: 16CH (basic) and 14 CH.
16-Channels
Channel Value Description Extended function
1CH 0-255 X Move (0°-360°) X scan midpoint
2CH 0-255 X ne adjustment X scanning scope
3CH 0-255 Y Move (0°-195°) Y scan midpoint
4CH 0-255 Y ne adjustment Y scanning scope
5CH 0-255
6CH
X Rotation
7CH
Y Rotation
0-14 No function
15-134 Forwards rotate from fast to slow
135-255 Backwards rotate from slow to fast
0-14 No function
15-134 Forwards rotate from fast to slow
135-255 Backwards rotate from slow to fast
0-9 No function
8CH
Strobe
10-200 Conventional strobe
201-239 Random strobe
240-255 No function
9CH 0-255 Dimmer 0-100%
10CH 0-255 Red 0-100%
11CH 0-255 Green 0-100%
12CH 0-255 Blue 0-100%
13CH 0-255 White 0-100%
X/Y speed - From fast to slow Scan speed
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
10
Page 11
TWILIGHT 60 ENDLESS User manual
0-31 No function
32-63 Color Macros 1
14CH
Macro function
of color
64-95 Color Macros 2
96-127 Color Macros 3
128-159 Color Macros 4
160-191 Color Macros 5
192-255 Reserve
15CH
Macro function
0-255 From slow to fast
of speed
0-19 No function
20-39 Pan/Tilt scan fast
40-59 Pan/Tilt scan slow
16CH Control
(When value is
between 20-99,
the extended
function 1CH-
5CH works)
60-79 Sound1
80-99 Sound2
100-119
120-139
140-159
160-179
180-199
200-219 Reset
220-239
240-255
ENGLISH
14-Channels
Channel Value Description Extended function
1CH 0-255 X Move (0°-360°) X scan midpoint
2CH 0-255 X ne adjustment X scanning scope
3CH 0-255 Y Move (0°-195°) Y scan midpoint
4CH 0-255 Y ne adjustment Y scanning scope
5CH 0-255 X/Y speed - From fast to slow Scan speed
6CH
X Rotation
7CH
Y Rotation
0-14 No function
15-134 Forwards rotate from fast to slow
135-255 Backwards rotate from slow to fast
0-14 No function
15-134 Forwards rotate from fast to slow
135-255 Backwards rotate from slow to fast
11
Page 12
ENGLISH
8CH Strobe
9CH Dimmer 0-255 0-100%
10CH Red 0-255 0-100%
11CH Green 0-255 0-100%
12CH Blue 0-255 0-100%
13CH White 0-255 0-100%
14CH Control
(When value
is between
20-99, the
extended
function 1CH-
5CH works)
TWILIGHT 60 ENDLESS User manual
0-9 No function
10-200 Conventional strobe
201-239 Random strobe
240-255 No function
0-19 No function
20-39 Pan/Tilt scan fast
40-59 Pan/Tilt scan slow
60-79 Sound1
80-99 Sound2
100-119
120-139
140-159
160-179
180-199
200-219 Reset
220-239
240-255
10. TROUBLESHOOTING
Phenomenon Solution
Fixture cannot start to work 1. Check if the power fuse burnout
Fixture light normally, but no responding to the DMX controller
1. Check if the DMX start address is correct
2. Check if the XLR signal cable was damaged
Fixture work intermittently Check if the fan work well, Whether dust
blocked fan and fan nets
11. Maintenance
When the lens have fracture and other damage, it should be replaced in time. When the
xture can’t start to run, please check if the fuse is burnout. If it is so, please install the
tted corresponding specication fuse (5x20mm T3A / 250V).
12
Page 13
ENGLISH
TWILIGHT 60 ENDLESS User manual
The TWILIGHT 60 ENDLESS is installed with overheating protection device, when it is
overheat, the overheating protection device will automatically cut off power supply.
Please check whether the fan is running, whether the fan and fan nets have dust jam,
nd troubleshooting before working. But note that a qualied technicians can do the
repair work.
In order to maintain the gobo wheel smooth rotation and smooth movement, it is suggested to add grease for the rotation gobo wheel every two months. Should use good
quality grease.
In order to ensure the xture working well, maintain the cleanness of xture is very
necessary. It should be clean once every 30 days after cooling the fans. Internal and
external optical lens, reector and coating color lter cleaning must be carried out
periodically to optimize the output light efciency. Do not use any contains chemical
solvent cleaning coating color lter. Cleaning the xture depending on the operating
frequency of xture and the surrounding environment. Clean with a soft cloth and
cleaning products for glass, suggest to clean the external optical system at least once
every 30 days , clean the internal optical system at least once every 30/60 days. Please
do not use alcohol and other organic solvents to wipe housing, lest cause damage.
12. SPECIFICATIONS
Light emitting source 1x60W RGBW 4in1 LED
Beam intensity: 30.000 Lux @ 1m
Beam angle 4°
Dimmer/Strobe Dimmer variable electronic dimmer (0-100%), 0-20Hz
PAN/TILT Pan: 540°, Tilt: 270°, with endless option
Working modes Stand-alone mode, DMX mode, Master/Slave synchronization mode
DMX Control 14CH / 16CH modes
Housing High temperature resistant engineering plastic + aluminum alloy
Voltage 100-240V,50-60Hz
Fuse T3A-250V, 5x20mm
Power consumption 115W
Fixture Size (LxHxD) 170 x 262 x 202 mm
Fixture Weight 3.3kg
Carton Size (LxHxD) 295 x 205 x 250mm
Carton Weight 4.5kg
13
Page 14
ENGLISH
TWILIGHT 60 ENDLESS User manual
13. WARRANTY AND SERVICE
All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specic
to the date of purchase as shown on your purchase receipt.
The following cases/components are not covered from the above warranty:
• Any accessories supplied with the product
• Improper use
• Fault due to wear and tear
• Any modication of the product effected by the user or a third party
SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing
faults free of charge at SOUNDSATION’s discretion either by repair or by exchanging individual
parts or the entire appliance. Any defective parts removed from a product during the course of a
warranty claim shall become the property of SOUNDSATION.
While under warranty period, defective products may be returned to your local SOUNDSATION
dealer together with original proof of purchase. To avoid any damages in transit, please use the
original packaging if available. Alternatively you can send the product to SOUNDSATION SERVICE
CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product to service
center you need an RMA number. Shipping charges have to be covered by the owner of the product.
For further information please visit www.soundsationmusic.com
14. WARNING
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2202/96/EC) and your national law.
This product should be handed over to a designated collection point, e.g., on an authorized onefor-one basis when you buy a new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (WEEE).
Improper handling of this type of waste could have a possible negative impact on the environment
and human health due to potentially hazardous substances that are generally associated with EEE.
At the same time, your cooperation in the correct disposal of this product will contribute to the
effective usage of natural resources.
For more information about where you can drop off your waste equipment for recycling, please
contact your local city ofce, waste authority, approved WEEE scheme or your household waste
disposal service.
14
Page 15
This product is imported in EU by
Questo prodotto viene importato nella UE da
FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy
www.soundsationmusic.com
Soundsation® is a registered trademark of FRENEXPORT SPA - Italy
Soundsation® è un marchio di fabbrica registrato della FRENEXPORT SPA - Italy
Page 16
www.soundsationmusic.com
Ver 1.1 - Sept. 2017
Loading...