Soundsation Spiral Looper USER MANUAL

Thank you for purchasing Soundsation Spiral Looper.
Before operating it, please read the following instructions.
1.Function-Switch
Press the footswitch to switch among different functions
2.LED Indicator
Indicates the different modes of the looper
3.Level Knob
Controls the volume of the looper
4.Input Jack
1/4″ mono audio jack, signal IN
1/4″ mono audio jack, signal OUT
6.DC IN Power Jack
DC 9V regulated AC adapter (Center Negative )
7.USB interface
File Import/Export and system upgrade
With SPIRAL LOOPER you can easily export your loops in Wav format to you computer (PC/Mac). You can also import Wav files from computer to your looper and play them immediately.
Download and install the SPIRAL MANAGER software (available for PC and Mac)
Download the SPIRAL MANAGER free software at www.soundsationmusic. com/en/services/product-downloads or visit product page at www.soundsationmusic.com
UnZip and run the .exe file
To EXPORT your loop:
Once you have recorded your loop, simply connect the looper to your computer via USB cable (included). You don’t need to use the DC adaptor, your loop remains stored when you turn the pedal off. Click ‘Export’ to save in your file in the desired folder with the desired name. Done!
To IMPORT your loop:
Connect your looper to your computer via USB cable (included). You don’t need to use the DC adaptor, USB will power the looper on. Click ‘Import’ and choose the desired loop in your folders. Done!
How to Delete record/overdub
Press the footswitch once when the LED is off, the Red light is on (Recording mode)
Press the footswitch once in the recording mode, the Green light is on (Playback mode)
Press the footswitch once in the Playback mode, the Red light is on (Overdubbing mode)
Press the footswitch once in the Overdubbing mode, the Green light is on (Playback mode)
How to Delete recording
In the Playback/Overdubbing mode, press the footswitch and hold on for at least 2 seconds, the LED will blink twice rapidly, then the last recording is deleted
How to Restore the recording
If you want to restore the last recording you have deleted in last step, press the footswitch and hold on for at least 2 seconds, the LED will blink twice rapidly, then the last recording is restored
How to Stop/Start/Delete the loops
In the Playback/Overdubbing mode, press the footswitch twice quickly, the LED will be blinking in Green, the Playback/Overdubbing is stopped
Press the footswitch once when the playback is stopped, the Green light is on, the Playback
starts again
Press the footswitch and hold on for 2 seconds when the playback is stopped, the light is off,
then all recordings are deleted
NOTE: Only Wav files are allowed for import/export features. You can import only one loop per session in your looper. This means that if your import a new loop you will override the stored one.
Maximum Recording Time: 10 Minutes
Maximum Overdubbing Times: Unlimited
True bypass circuit
Bit resolution: 24 bit
Input: 1/4’’ Mono Jack (Impedance: 470K Ohms)
Output: 1/4’’ Mono Jack (Impedance: 100K Ohms)
Power Supply: DC 9V (Center Negative)
Working Current: 94 mA
Dimensions: 95(L)*41.5(W)*58(H)mm
G.W: 290g
Accessories: Manual, USB cable, downloadable software (PC/Mac)
Made in china
SOUNDSATION is a registered trademark of FRENEXPORT SpA. All rights reserved
Loading...