Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mission
is to satisfy all possible needs of musical instrument, professional audio and
lighting users offering a wide range of products using the latest technologies.
We hope you will be satised with this item and, if you want to collaborate, we
are looking for a feedback from you about the operation of the product and
possible improvements to introduce in the next future. Go to our website www.
soundsationmusic.com and send an e-mail with your opinion, this will help
us to build instruments ever closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect
operation can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
ENGLISH
TABLE OF CONTENTS
1. GETTING STARTED .................................................................................................6
1.1 Important Safety Symbols ....................................................................................6
1.2 Important Safety Instructions ...............................................................................6
1.3 Before You Start ....................................................................................................8
2. PRODUCT OVERVIEW ............................................................................................9
2.1. Features .................................................................................................................9
2.2. Front and Rear panels ........................................................................................10
2.3. Mains Connections .............................................................................................10
2.4. DMX-512 Connection ..........................................................................................11
3. DISPLAY .................................................................................................................12
3.1 LED display function ...........................................................................................12
4. DMX Channel Mode ...............................................................................................14
4.1. Gobos ..................................................................................................................16
5. WARRANTY AND SERVICE ..................................................................................18
6. WARNING ..............................................................................................................19
5
ENGLISH
1. GETTING STARTED
1.1 Important Safety Symbols
The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal
operating conditions, which may be sufcient to constitute the
risk of electric shock or death.
The symbol is used in the service documentation to indicate
that specic component shall be replaced only by the component specied in that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
SC-30W-1 User’s manual
Denotes the apparatus is turned on
Denotes the apparatus is turned off
WARNING:
CAUTION:
1.2 Important Safety Instructions
f Read these instructions
f Keep these instructions
f Heed all warning
f Follow all instructions
1.2.1. Water / Moisture
This lighting is intended to indoor use only. To prevent risk of re or shock,
do not expose xture to rain or moisture. Make sure there are no ammable,
explosive or corrosive materials surrounded in 10 meters while operating.
6
Describes precautions that should be observed to prevent the
danger of injury or death to the operator.
Describes precautions that should be observed to prevent danger of the apparatus.
ENGLISH
SC-30W-1 User’s manual
1.2.2. Heat
The apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat. Fixture may carry high heat, do
not aim at objective exceeding 2 minutes.
1.2.3. Ventilation
The unit must be installed in a location with adequate ventilation, at least 5m
away from adjacent surfaces. Be sure that no ventilation slots are blocked.
1.2.4. Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety.
1.2.5. Installation
Always secure xture using a safety chain and carrying handles. Never carry
the xture by its cord.
1.2.6. Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two poles; a grounding-type plug has two poles and a third
grounding terminal. The third prong is provided for your safety. If the provided
plug does not t into your outlet, refer to an electrician for replacement.
1.2.7. Power Supply
Always make sure that you are connecting to the proper voltage and the line
voltage not higher than stated on the decal or rear panel of the xture. Unplug
this apparatus during lightning storms or when unused for long periods of time.
1.2.8. Fuse
To prevent the risk of re and damaging the unit, please use only of the recommended fuse type as described in the manual. Before replacing the fuse,
make sure the unit turned off and disconnected from the AC outlet.
1.2.9. Electrical Connection
Always disconnect from the power source before servicing or replacing fuse/
lamp and be sure to replace with same fuse/lamp size and type. Cut off power
before moving, repairing and cleaning the machine. Improper electrical wiring
may invalidate the product warranty.
To avoid electric shock, all xtures must be connected to circuits with a suitable ground. Do not power on and power off the xture in a short time.
1.2.10. DMX connection
When use DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source.
7
ENGLISH
SC-30W-1 User’s manual
1.2.11. Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
1.2.12. Servicing
In case of failure or misfunction occurred, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Buy the same spare parts/components from manufacturer directly.
Any damage that cased by violating this manual is out of insurance, our company will not take the responsibility.
1.2.13. Warning
Avoid direct eye exposure to the light source while it is on.
1.3 Before You Start
1.3.1 UNPACKING
Carefully unpack the box and check the contents to ensure that all parts are
present and in good conditions.
1. 30W RGB COB LED Scanner
2. 1.2m power cable
3. User Manual
If anything damaged during transport, notify the shipper immediately and keep
the packing material for inspection. Again, please save the carton and all
packing materials. If the xture must be returned to manufacturer, it is important that the xture be returned in the original manufacturer box and packing.
1.3.2 Getting started
Make sure there is enough space around the unit for proper ventilation and
prevent overheating; do not place the unit on top of hot devices such as
radiators or power ampliers. The console is connected to mains through the
supplied cable. The product meets the required safety standards. Blown fuses
must be replaced with fuses of the same type and specication.
Make sure that all units must be properly grounded. For your safe-
ty, you should never remove any ground connector from electrical
devices or power cables, or make them inoperative.
Our products are subject to a process of continual further development. There-
8
ENGLISH
SC-30W-1 User’s manual
fore modications to the technical features remain subject to change without
further notice.
2. PRODUCT OVERVIEW
SC-30W-1 is a professional lightweight scanner able to create beautiful and
powerful lighting effects thanks to the high-brightness, long-life 30W RGB
COB LED and the 9 high-quality gobos. The 7CH or 9CH Master/Slave DMX
control or the Auto and Sound modes allows the SC-30W-1 to be used in
a wide range of different applications: disco dance halls, clubs, pubs, bars,
mobile DJ, etc.
2.1. Features
f LED source: 1pc 30W RGB COB LED
f 9 gobos + RGB color + spot, colorful changeable effect
f Built-in Master/Slave, Sound Active modes and Show mode
f DMX Control: 7 / 9 CH modes
f LED display, easy to set up
f Control modes: Sound active, Auto run, Show Mode, DMX Master / Slave
f Suitable for disco dance hall, club, bar, party, mobile DJ and so on
f Voltage: AC100-240V, 50-60Hz
f Fuse: T3A - 250V
f Power consumption: P=50W
f Eyelet for safety rope
f Fixture dimension (WxHxD): 375 x 175 x 150 mm (excl. bracket)
f Packing dimension (WxHxD): 450 x 280 x 255 mm
f Net weight: 3.4 kg
f Gross weight: 4.2 kg
2.1.1. Luminance (at 1 meter)
Red 980Lux
Green 1320Lux
Blue 1620Lux
White 3700Lux
9
ENGLISH
SC-30W-1 User’s manual
2.2. Front and Rear panels
Front Panel
DISPLAY
DMX •
MASTER •
MENU DOWN UP ENTER
There is a 4-digit LED display, which shows names and value of all parame-
ters duging set up, and 4 bottons: MENU, DOWN, UP, ENTER.
Rear Panel
4
• SLAVE
• SOUND
DMX IN DMX OUT
MIC
1
2
POWER IN/FUSE
100-240V - 50-60 Hz
3
1. DMX512 In/Out connectors
2. Microphone (used in Sound Mode)
3. Power On/Off switch
4. Eyelet for safety rope
2.3. Mains Connections
Connect the device to the mains with the power-plug. The wire corresponden-
10
ENGLISH
SC-30W-1 User’s manual
ce is as follow:
WIRE PIN INTERMATIONAL
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth must to be connected! Pay attention to safety!
Before taking into operation for the rst time, the installation has to be approved by an expert.
2.4. DMX-512 Connection
The wires must not come into contact with each other; otherwise the xtures
will not work at all, or will not work properly. Only use a DMX cable and 3-pin
XLR-plugs and connectors in order to control with the xture or one xture with
another.
DMX use of XLR connectors
1 = Ground / Shield
2 = DMX +
3 = DMX -
INPUT OUTPUT
If you are using the recommended controllers, you can connect the DMX-output of the controller directly with the DMX-input of the rst xture in the DMXchain. If you wish to connect DMX-controllers with other XLR-output, you need
to use adapter-cables.
2.4.1. Building a Serial DMX Chain
DMX Termonator
DMX 512
11
ENGLISH
SC-30W-1 User’s manual
Connect the DMX-output of the rst xture in the DMX-chain with the DMX-input of the next xture. Always connect one output with the input of the next
xture until all xtures are connected.
A word on termination: DMX is a resilient communication protocol, however
errors still occasionally occur. Termination reduces signal errors, and therefore best practices include use of a terminator in all circumstances. If you are
experiencing problems with erratic xture behavior, especially over long signal
cable runs, a terminator may help improve performance.
DMX Terminator
120ohm, 1/4W
resistor
To build your own DMX Terminator: Obtain a 120-ohm, 1/4-watt resistor, and
wire it between pins 2&3 of the last xture. They are also readily available
from specialty retailers.
Complimentarysignalcablecantransmitssignalsto20unitxtures
atmost.Signalamplierisamusttoconnectmorextures.
3. DISPLAY
DISPLAY
DMX •
MASTER •
MENU DOWN UP ENTER
• SLAVE
• SOUND
3.1 LED display function
When choose a function, press MENU button and select menu options you
want. Press ENTER button to accept the selected function; the display will
ash. Then press UP/DOWN button to select the required function, press
ENTER button, or wait for 10 seconds or press MENU button, then enter the
12
SC-30W-1 User’s manual
ENTER
UP & DOWN
menu mode.
3.1.1. Menu functions
ENGLISH
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
MENU
ENTER
ENTER
ENTER
ENTER
ENTER
UP
UP
UP
UP
UP
ENTER
UP
UP
ENTER
UP & DOWN
ENTER
ENTER
ENTER
ENTER
UP & DOWN
ENTER
ENTER
ENTER
UP & DOWN
ENTER
ENTER
ENTER
ENTER
ENTER
MENU
ENTER
ENTER
ENTER
ENTER
DMX Address Code
Channel Mode
Master Mode
Slave Mode 1
Slave Mode 2
Show Mode
Sound Active On
Sound Active Off
Sound Sens. Adj.
Normal Scanning
Stop Working
LED On
LED Off
LED Display Positive / Negative
X Axis Position
X Axis Reverse Position
Y Axis Position
Y Axis Reverse Position
Test
Work Time
Software Version
ENTER
Reset
13
ENGLISH
4. DMX Channel Mode
7CH
Channel Value Function
CH1 000-255 X axis position
CH2 000-255 Y axis position
000-007 Black out
008-015 Open
016-131 Strobe, fast to slow
132-139 Open
CH3
CH4
CH5 000-255 Choose static color
CH6 000-255 Dimmer 0 ~ 100%
140-181 Fast open slow close
182-189 Open
190-231 Slow open fast close
232-239 Open
240-247 Random strobe
248-255 Open
000-006 Gobo 007-012 Gobo 1
013-018 Gobo 2 019-025 Gobo 3
026-031 Gobo 4 032-037 Gobo 5
038-044 Gobo 6 045-050 Gobo 7
051-056 Gobo 8 057-063 Gobo 9
064-070 Gobo Shaking 071-076 Gobo 1 Shaking
077-082 Gobo 2 Shaking 083-089 Gobo 3 Shaking
090-095 Gobo 4 Shaking 096-101 Gobo 5 Shaking
102-108 Gobo 6 Shaking 109-114 Gobo 7 Shaking
115-120 Gobo 8 Shaking 121-127 Gobo 9 Shaking
128-189 Gobo change counterclockwise rotation slow to fast
190-193 Stop
194-255 Gobo change clockwise rotation fast to slow
SC-30W-1 User’s manual
14
SC-30W-1 User’s manual
000-069 No function
070-079 Fast black out, fast open, when pan move
080-089 Enable Blackout when pan move
090-119 Fast black out, fast open, when gobo change
CH7
9CH
CH Value Function
CH1 000-255 X axis position
CH2 000-255 Y axis position
CH3 000-255 LED dimmer 0 ~ 100%
CH4 000-255 LED open (Same as CH3 of 7CH)
CH5
CH6 000-255 Red, 0-100%
CH7 000-255 Green, 0-100%
CH8 000-255 Blue, 0-100%
120-129 Gobo change when stop pan move
130-199 No function
200-209 Reset
210-239 No function
240-255 Sound active (independent operation)
000-006 Gobo 007-012 Gobo 1
013-018 Gobo 2 019-025 Gobo 3
026-031 Gobo 4 032-037 Gobo 5
038-044 Gobo 6 045-050 Gobo 7
051-056 Gobo 8 057-063 Gobo 9
064-070 Gobo Shaking 071-076 Gobo 1 Shaking
077-082 Gobo 2 Shaking 083-089 Gobo 3 Shaking
090-095 Gobo 4 Shaking 096-101 Gobo 5 Shaking
102-108 Gobo 6 Shaking 109-114 Gobo 7 Shaking
115-120 Gobo 8 Shaking 121-127 Gobo 9 Shaking
128-189 Gobo change counterclockwise rotation slow to fast
190-193 Stop
194-255 Gobo change clockwise rotation fast to slow
ENGLISH
15
ENGLISH
000-069 No function
070-079 Fast black out, fast open, when pan move
080-089 Enable Blackout when pan move
090-119 Fast black out, fast open,gobo change when pan move
CH9
4.1. Gobos
Here are shown the 9 gobos + blank of SC-30W-1.
120-129 Gobo change when stop pan move
130-199 No function
200-209 Reset
210-239 No function
240-255 Sound active (independent operation)
SC-30W-1 User’s manual
16
SC-30W-1 User’s manual
ENGLISH
17
ENGLISH
SC-30W-1 User’s manual
5. WARRANTY AND SERVICE
All SOUNDSATION products feature a limited two-year warranty. This two-
year warranty is specic to the date of purchase as shown on your purchase
receipt.
The following cases/components are not covered from the above warranty:
• Any accessories supplied with the product
• Improper use
• Fault due to wear and tear
• Any modication of the product effected by the user or a third party
SOUNDSATION shall satisfy the warranty obligations by remedying any
material or manufacturing faults free of charge at SOUNDSATION’s discretion
either by repair or by exchanging individual parts or the entire appliance. Any
defective parts removed from a product during the course of a warranty claim
shall become the property of SOUNDSATION.
While under warranty period, defective products may be returned to your local
SOUNDSATION dealer together with original proof of purchase. To avoid any
damages in transit, please use the original packaging if available. Alternatively
you can send the product to SOUNDSATION SERVICE CENTER – Via Enzo
Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product to service center you need an RMA number. Shipping charges have to be covered
by the owner of the product.
For further information please visit www.soundsationmusic.com
18
ENGLISH
SC-30W-1 User’s manual
6. WARNING
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2202/96/EC) and your
national law.
This product should be handed over to a designated collection point, e.g., on
an authorized one-for-one basis when you buy a new similar product or to an
authorized collection site for recycling waste electrical and electronic equipment (WEEE).
Improper handling of this type of waste could have a possible negative impact
on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to the effective usage of
natural resources.
For more information about where you can drop off your waste equipment
for recycling, please contact your local city ofce, waste authority, approved
WEEE scheme or your household waste disposal service.
This product is imported in EU by
FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy
www.soundsationmusic.com
Soundsation® is a registered trademark of FRENEXPORT SPA - Italy
19
www.soundsationmusic.com
Ver 1.1 - Jan. 2016
Loading...