Page 1
Product Instruction
MHL-10W-36-RGBW
36*10W (four in one) (fancy effect)
LED Moving Head Light
Page 2
Product Profile:
Power supply: 110-230V AC 50/60Hz
Power consumption: 350W
Light source: 36 pieces 10W LED
DMX control channel: 27
DMX 512 connection: 3-pin XLR
Flash-rate: 25Hz
Maximum PAN-movement 630°: In 2.5s
Maximum TILT-movement265°: In 1.5s
Number of LED: 36
Beam angle: approx. 40°
Dimensions: 33*22*45 cm
Weight: 9 kg
DMX Values and Functions
CH1
Pan
0—255
0-540 degrees
CH2
Tilt
0—255
0-280 degrees
CH3
Dimmer
0－255
Dimmer
CH4
Strobe
0 – 6
7 – 65
66 – 69
70 – 128
129 – 132
133 – 191
192 – 195
196 – 255
No Function
Strobe1 Slow to Fast
No Function
Strobe2 Slow to Fast
No Function
Strobe3 Slow to Fast
No Function
Random
CH5
Red
0—255
Red 0％-100％
CH6
Green
0—255
Green 0％-100％
CH7
Blue
0—255
Blue 0％-100％
CH8
White
0—255
White 0％-100％
CH9
Red 1
0—255
Red 0％-100％
CH10
Green 1
0—255
Green 0％-100％
CH11
Blue 1
0—255
Blue 0％-100％
CH12
White 1
0—255
White 0％-100％
CH13
Red 2
0—255
Red 0％-100％
CH14
Green 2
0—255
Green 0％-100％
CH15
Blue 2
0—255
Blue 0％-100％
Page 3
CH16
White 2
0—255
White 0％-100％
CH17
Red 3
0—255
Red 0％-100％
CH18
Green 3
0—255
Green 0％-100％
CH19
Blue 3
0—255
Blue 0％-100％
CH20
White 3
0—255
White 0％-100％
CH21
Pan/Tilt speed
0—255
Pan/Tilt speed
CH22
Manual RGB mixing colors
0—255
Mixing colors
CH23
Pan fine
0—255
Pan fine
CH24
Tilt fine
0—255
Tilt fine
CH25
Auto function
0 – 127
128 – 255
No Function
Auto Run
CH26
Zoom
0—255
Zoom
CH27
Reset
0 – 251
252 – 255
No function
Renew factory state
Menu Operation Instructions:
One: Set DMX Address code:
1、Press “Menu button to Set DMX Address, to confirm by press “ENTER”
button.
2、Show Set DMX address DMX address: 001, correct by pressing
“UP&DOWN” button
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving
Two: Set built-in program:
1、Press “Menu” button to Set run program，to confirm by press “ENTER”
button.
2、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Three: Setting Reversed Pan:
1、Press “Menu” button to Set Pan Reverse, confirm by press “ENTER” button.
2、Show Set Pan No/Yes, correcting by “UP&DOWN” Button
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Four: Setting Reversed Tilt:
1、Press “Menu” button to Set Tilt Reverse, confirm by press “ENTER” button.
2、Show Set Pan No/Yes, correcting by “UP&DOWN” Button
Page 4
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Five: Setting Balance：
1、Press “Menu” button to Set Balance，confirm by press “ENTER” button.
2、Show Adjust red Value: 255 correct by pressing “UP&DOWN” button.
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
4、Press” MENU” button to quit balance setting
Six: Setting DMX Channel:
1、Press “Menu” button to Set Run Channel，confirm by press “ENTER” button.
2、Show DMX Channel 12CH，Correct by pressing “UP&DOWN” button.
Seven: Setting Master-slave Mode
1、Press “Menu” button to Set Mast Mode，confirm by press “ENTER” button
2、Show Run Slave，correct by pressing “UP&DOWN” button. Mast mean Master
machine, Slave mean slave machine Mast OFF mean master-slave off
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving
Eight: Setting LCD light:
1、Press “Menu” button to set LCD Light, confirm by press “ENTER” button.
2、Show Light ON/OFF, correct by pressing “UP&DOWN” button.
3、Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Nine: Checking software version:
1、Press “Menu” button to Display Ver.，confirm by press “ENTER” button.
2、Show software version
3、Press “MENU” to quit
Ten: Setting Sound Activation ON/OFF:
1、 Press “Menu” button to set sound active mode, Confirm by press
“ENTER” button.
2、 Show sound active ON/OFF, correct by pressing “UP&DOWN” button.
3、 Press, “ENTER” button to save and quit. Press “MENU” button to quit no saving.
Eleven: Run Manuel Mode:
Page 5
1、Press “Menu” button to Run manual mode，Confirm by press “ENTER” button.
2、Show Run manual Adjust Red，Press “UP&DWON” button to choose the wanted
channel, Red，Green，Blue，PAN，TILT，to enter by pressing “ENTER” Button.
3、Press “UP&DWON” button to correct, Press” ENTER” Button to save or quit the
above menu.
4、Press” ENTER” Button to quit manual mode.
Loading...