"
Technical!parameters:"
Voltage:"AC"220V" " " 50"HZ" "
1. Power:"1500W" "
2. Fuse:"15A" " "
3. Size:"51*19*26"CM" "
4. N.W:"3.5KG" "
5. G.W:"3.2KG" "
Index! "
1. Introduction" "
2. Safe"warning" "
3. Operating"instruction" "
4. Technical"p ara m eter" "
5. Maintenance"card" "
Introduction! !
Welcome"for"using"the"digital"strobe" light,"which"has"three"working"method"of"DMX"
acceptance," automatic" operation," controller" control." It" is" suitable" for" using" in" the" big,"
medium,"small"entertainment"place."
Main"feature:"
Adopting"the"good"1500W"strobe"tube,"high"light"
DMX-512"control,"2"*"DMX"channel"------light","the"speed"of"strobe"
DIP"function"and"address"select"switch" "
Safe!warning! !
1. Please"read" this"manual" carefully"before"using"it,"following"th e" operation" index"
and"keeping"it"safe."
2. It"is"suitable"for"use"inside."The"light"should"be"placed"in"dry,"ventilated" p la ce "in"
order"not"to"lead"to"shortcut"circuit"by"moisture"and"rain." "
3. While"cleaning"the"light,"you"should"cut"the"power"off."
4. Don’t"install"it"nearby"the"hot"place"in"case"its"temperature"will"be"raising"and"it"
will"be"damaged."
5. Don’t"block"the"ventilated"hole."Make"sure"ventilation"and"heat"emission"goo d . "
6. The"lights"should"plug" into"the" power" of" earth" line." The" power" voltage" should"
match"the"rated"voltage"marked"by"the"light."
7. Don’t" insert" the" irrelevant" product," in" case" that" the" product" touches" the"
heavy-fisted"part,"resulting"in"p art"shortcut"circuit,"fire,"getting"an"electric" sh oc k"
and"affect"the"right"use"of"the"product."
8. if"any"problem,"you"should"ask"the"professional"to"maintain"it.!
operating!instruction" "
>>Single!use:!
""Setting" up" the" DIP10" --ON," DIP1–OFF," and" plugging" into" the" power," you" should"
adjust"the"two"knob"of"light"and"speed"of"the"products"to"the"right"position."
>>Controller!control:!
""Connecting"the"signal"cable" following" the"chart1,"setting"up" the" D IP10"DIP1" –ON,"
plugging"into"power,"adjusting"the" light"of" the" product," thus" you"can"adjust"the"
speed" of" the" strobe" by" using" the" controller." It" can" get" the" in-phase" effect" by"
connecting"several"lights."
"
""controller!
"
"
!
"
DMX!controller!control!
""Connecting"the" signal"cable"following"the" chart2,"setting"up" the"DIP10—OFF"and"
address"code," plugging" into" power,"thus" you" can"adjust"the"speed"of"strobe" an d"
light"by"using"the"controller."It"can"get"the"in-phase"effect."
"
DMX!controller!
!
"