soundsation CEL-5318-RG User Manual

CEL-5318-RG

COMBINED EFFECT LIGHT 5x3W RGBWA LED EFFECT

+ 8x1W WH STROBO + 200mW RG LASER

Please read this manual carefully and proper take care of this manual

USER MANUAL

2

ENGLISH

Dear customer,

First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy all possible
needs of musical instrument and professional audio and lighting users offering a wide range of
products using the latest technologies.

We hope you will be satised with this item and, if you want to collaborate, we are looking for a

feedback from you about the operation of the product and possible improvements to introduce in
the next future. Go to our website www.soundsationmusic.com and send an e-mail with your

opinion, this will help us to build instruments ever closer to customer’s real requirements.

One last thing: read this manual before using the instrument, an incorrect operation can cause
damages to you and to the unit. Take care!

The SOUNDSATION Team

IMPORTANT SAFETY SYMBOLS

The symbol is used to indicate that some hazardous live terminals
are involved within this apparatus, even under the normal operating

conditions, which may be sufcient to constitute the risk of electric

shock or death.

The symbol is used in the service documentation to indicate that spe-

cic component shall be replaced only by the component specied in

that documentation for safety reasons.

Protective grounding terminal

Alternating current/voltage

Hazardous live terminal

Denotes the apparatus is turned on

Denotes the apparatus is turned off

3

ENGLISH

WARNING:

Describes precautions that should be observed to prevent the danger
of injury or death to the operator.

CAUTION:

Describes precautions that should be observed to prevent danger of
the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

f Read these instructions

f Keep these instructions

f Heed all warning

f Follow all instructions

Water and Moisture

The apparatus should be protected from moisture and rain and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.

Heat

The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat.

Ventilation

Do not block areas of ventilation opening. Failure to do could result in re. Always

install according to the manufacturer's instructions.

Object and Liquid Entry

Objects do not fall into and liquids are not spilled into the inside of the apparatus for

safety.

Power Cord and Plug

Protect the power cord from being walked on or pinched particularly at plugs, conve­nience receptacles, and the point where they exit from the apparatus. Do not defeat the
safety purpose of the polarized or grounding-type plug. A polarized plug has two poles;
a grounding-type plug has two poles and a third grounding terminal. The third prong

is provided for your safety. If the provided plug does not t into your outlet, refer to an

electrician for replacement.

Power Supply

The apparatus should be connected to the power supply only of the type as marked on
the apparatus or described in the manual. Failure to do could result in damage to the
product and possibly the user. Unplug this apparatus during lightning storms or when
unused for long periods of time.

4

ENGLISH

SC-80W-1-W User manual

TABLE OF CONTENTS

1. PRODUCT SPECIFICATION ....................................................................................5

2. LED DISPLAY ..........................................................................................................5

2.1. LED display function..............................................................................................................6

3. Display program instruction ..................................................................................7

4. HOW TO OPERATE .................................................................................................8

4.1. Master/Slave build-in function ...............................................................................................8

4.2. Two light show ....................................................................................................................... 9

4.3. DMX Controller ......................................................................................................................9

5. CHANNEL MODES ..................................................................................................9

5.1. 1CH Mode .............................................................................................................................9

5.2. 21CH Mode ...........................................................................................................................9

6. WARRANTY AND SERVICE ..................................................................................10

7. WARNING ..............................................................................................................11

Fuse

To prevent the risk of re and damaging the unit, please use only of the recommended

fuse type as described in the manual. Before replacing the fuse, make sure the unit
turned off and disconnected from the AC outlet.

Electrical Connection

Improper electrical wiring may invalidate the product warranty.

Cleaning

Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.

Servicing

Do not implement any servicing other than those means described in the manual. Refer

all servicing to qualied service personnel only. Only use accessories/attachments or

parts recommended by the manufacturer.

WARNING: Please remember the high sound pressure do not only temporar-

ily damage your sense of hearing, but can also cause permanent damage.
Be careful to select a suitable volume.

5

ENGLISH

SC-80W-1-W User manual

1. PRODUCT SPECIFICATION

f Effects: Derby effect with 5x 3W RGBWA 5IN1 LED; Strobo Effect with 8x 1W White

LED; 2-Color Laser Effects with 150mW Red Laser and 50mW Green Laser

f Four control modes: Sound active, LED auto run, DMX and master/slave

f Built-in master/slave and sound active modes, super show mode

f DMX Channel Modes: 1CH and 21CH

f LED display, easy to control

f Ideal for disco dance hall, club, bar, party, mobile DJ and so on

f Voltage: AC100-240V 50/60Hz

f Consumption Power: 30W

f Light size: 29.5 x 22.5 x 28.5 cm

f Weight: 3.2 kg

2. LED DISPLAY

Item N. Display Function

Button:

(1) MENU Enter the menu

(2) DOWN Next the menu

(3) UP Previous menu

(4) ENTER Enter the select function

Led:

(5) DMX

DMX mode,If received the DMX signal,

the indicator light ashing

(6) SLAVE

Slave mode,if received slave signal, the

indicator light ashing

(7) MASTER

Master mode, one machine or many in

test, There is a setting for master, the

indicator light

(8) SOUND

In the sound active, if have sound signal,

the indicator light ashing

6

ENGLISH

SC-80W-1-W User manual

2.1. LED display function

To choose a function, press MENU button, then press UP/DOWN button and press

ENTER button to conrm and edit specic parameters. To exit and go back to main

mode, wait for 10 seconds or press the MENU long time. A complete list of all menus
and sud-menus is as follows:

7

ENGLISH

SC-80W-1-W User manual

3. Display program instruction

1. - DMX512 Address Setting

Choose , press ENTER button to conrm. Press UP/DOWN button to nd initial
address, then press ENTER button to save it. Wait 10seconds or press MENU for long
time to return to main menu.

2. - Channel mode

Choose , press ENTER button to conrm. Press UP/DOWN button to select the
channel, like (1CH) or (21CH) mode, etc. Press ENTER button to save

it. Wait 10seconds or press MENU for long time to return to main menu.

3. - Slave mode

Choose , press ENTER button to enter, (Master) or (Slave 1)
or (Slave 2) mode, press ENTER button to save it. After 10seconds or press

MENU for long time to return to main menu.

4. - Show mode

Choose , press ENTER button to conrm, enter (Random show) or

(show 1) or (show 2) or … or (show 8), then press ENTER but-

ton to save it. Wait 10seconds or press MENU for long time to return to main menu.
Choose , press ENTER button to conrm, press UP button to enter , then
press ENTER to enter , use UP button to increase conversion speed, the maxi­mums speed is

5. - Sound Control

Choose , press ENTER button to conrm. Use UP/DOWN button to select
(Sound control on) or (Sound control off), then press ENTER button to save it.

After 10seconds or press MENU for long time to return to main menu.

6. - Sound Sensitivity

Choose , press ENTER button to conrm. Use UP/DOWN button to adjust the
sensitivity value from no sound control to the max , after selection, then

press ENTER button to save it. Wait 10seconds or press MENU for long time to return
to main menu.

8

ENGLISH

SC-80W-1-W User manual

7. - LED display

Choose , press ENTER button to conrm. Use UP/DOWN button to select

(display on) or (display off) mode, after selection, then press ENTER

button to save it. Wait 10seconds or press MENU for long time to return to main menu.

8. - Display inversion

Choose (Normal), press ENTER button to conrm, then enter (Inver­sion). After selection, press MENU button to enter the mode that has been selected.
Wait 10seconds or press MENU for long time to return to main menu.

9. - Test

Press MENU button to , press ENTER button, the led display will strobe, the
light will run built-in program to test, press MENU to back to main menu.

10. - Working time

Press MENU button to , press ENTER button, it will show the working time on
the display. Press MENU to back to main menu.

11. - Program version

Press MENU button to , press ENTER button, it will show the Program version
on the display. Press MENU to back to main menu.

4. HOW TO OPERATE

Here are 2 ways to operate:

f Master/slave build-in program to control

f DMX controller

4.1. Master/Slave build-in function

Connect the lights in series, the rst light control the other light to auto show, sound
control show and so on. It’s very good for the instant show mode. Must set the rst light

to be master light same time to choose (Random show), (show

1) or …or (show 8).
If there are no DMX signals, the master mode LED will light up, the sound control LED
will strobe according to the music, the other lights will not work in slave mode.

Choose (Normal) or (two light show) mode, when connect the

DMX cable, the slave LED will light up.

9

ENGLISH

SC-80W-1-W User manual

4.2. Two light show

For the slave light, slave 1 ( ) running same as the master light, slave 2 ( )
running against the master light. If there are just two light, could set the second light as

slave light ( ) for better show.

4.3. DMX Controller

If controlled by DMX controller, you need to set the DMX address code to control the
light, the address code value is between 1-512, then the light will receive the signal
accordingly.

Press MENU button, choose , press ENTER button, address code will strobe.
Use UP /DOWN to select DMX512 address code. After address code settled, press
ENTER button until the address code stops strobing, it will automatically return to the
menu after 8 seconds. If you want to go back to the previous status and without any
changes, you could press MENU button.

5. CHANNEL MODES

5.1. 1CH Mode

Channel Value Function

CH1

(008-255 all under

sound control)

000-007 No function
008-037 Show mode 1
038-067 Show mode 2
068-097 Show mode 3
098-127 Show mode 4
128-157 Show mode 5
158-187 Show mode 6
188-217 Show mode 7
218-247 Show mode 8
248-255 Random show 1-8

5.2. 21CH Mode

Channel Value Function

CH1 000-255 Full dimmer 1,0-100%
CH2 000-255 Strobe 1, slow to fast
CH3 000-255 R dimmer,0-100%
CH4 000-255 G dimmer,0-100%
CH5 000-255 B dimmer,0-100%
CH6 000-255 W dimmer,0-100%

10

ENGLISH

SC-80W-1-W User manual

CH7 000-255 A dimmer,0-100%
CH8 000-255 Driver run

CH9 000-255 Full dimmer 2,0-100%
CH10 000-255 Strobe 2, slow to fast
CH11 000-255 W1 dimmer,0-100%
CH12 000-255 W2 dimmer,0-100%
CH13 000-255 W3 dimmer,0-100%
CH14 000-255 W4 dimmer,0-100%
CH15 000-255 W5 dimmer,0-100%
CH16 000-255 W6 dimmer,0-100%
CH17 000-255 W7 dimmer,0-100%
CH18 000-255 W8 dimmer,0-100%
CH19 000-255 Red laser light up
CH20 000-255 Green laser light up
CH21 000-255 Laser rotate

6. WARRANTY AND SERVICE

All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specif­ic to the date of purchase as shown on your purchase receipt.

The following cases/components are not covered from the above warranty:

• Any accessories supplied with the product

• Improper use

• Fault due to wear and tear

• Any modication of the product effected by the user or a third party

SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing

faults free of charge at SOUNDSATION’s discretion either by repair or by exchanging individual

parts or the entire appliance. Any defective parts removed from a product during the course of a
warranty claim shall become the property of SOUNDSATION.

While under warranty period, defective products may be returned to your local SOUNDSATION
dealer together with original proof of purchase. To avoid any damages in transit, please use the
original packaging if available. Alternatively you can send the product to SOUNDSATION SER­VICE CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product
to service center you need an RMA number. Shipping charges have to be covered by the owner of
the product.

For further information please visit www.soundsationmusic.com

11

ENGLISH

SC-80W-1-W User manual

7. WARNING

PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only

This symbol indicates that this product is not to be disposed of with your household waste, accord­ing to the WEEE Directive (2202/96/EC) and your national law.

This product should be handed over to a designated collection point, e.g., on an authorized one­for-one basis when you buy a new similar product or to an authorized collection site for recycling

waste electrical and electronic equipment (WEEE).

Improper handling of this type of waste could have a possible negative impact on the environment
and human health due to potentially hazardous substances that are generally associated with
EEE. At the same time, your cooperation in the correct disposal of this product will contribute to
the effective usage of natural resources.

For more information about where you can drop off your waste equipment for recycling, please
contact your local city ofce, waste authority, approved WEEE scheme or your household waste

disposal service.

This product is imported in EU by

Questo prodotto viene importato nella UE da

FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy

www.soundsationmusic.com

Soundsation® is a registered trademark of FRENEXPORT SPA - Italy

Soundsation® è un marchio di fabbrica registrato della FRENEXPORT SPA - Italy

www.soundsationmusic.com

Ver 1.0 - Sept. 2016