soundsation BEAM-988-10W-6 User Manual

BEAM-988-10W-6

USER MANUAL

PRO-LIGHTING

Dear customer,

first of all, thanks for purchasing a SOUNDSATION® product. Our mission is to
satisfy all the possible needs of musical instrument and professional audio users
offering a wide range of products using the latest technologies for a reasonable price.
We h ope you wi ll be sat is fie d wi th t his item and, if you wa nt t o co llaborate, we are
looking for a feedback from you about the operation of the product and for possible
improvements to introduce in the next future. Go to our website

www.soundsationmusic.com and send an e-mail with your opinion, this will

help us to build instruments ever closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect operation can
cause damages to you and to the unit. Take care!

The SOUNDSATION Team

WARNING

PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein)
only

This symbol indicates that this product is not to be disposed of with your household
waste, according to the WEEE Directive (2202/96/EC) and your national law.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (WEEE) .
Improper handling of this type of waste could have a possible negative impact on the
environment and human health due to potentially hazardous substances that are
generally associated with EEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources.
For more information about where you can drop off your waste equipment for
recycling, please contact your local city office , waste authority , approved WEEE
scheme or your household waste disposal service.

Contents and images shown on this manual can be changed without any
notice. Please visit our website www.soundsationmusic.com to check latest
version.

DESIGNED IN ITALY BY

SOUNDSATION®

All the Trademarks are property of their respective owners

SOUNDSATION® is a registered trademark of

FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati – Italy

© SOUNDSATION 2012 – All rights reserved – All total or partial reproduction of

this manual by any other company or person without express authorization of

SOUNDSATION is strictly forbidden.

WA R R A N T Y & S E R V I C E

All SOUNDSATION products feature a limited two-year warranty. This two-year
warranty is specific to the date of purchase as shown on your purchase receipt.

The following cases/components are not covered from the above warranty:

• Any accessories supplied with the product

• Improper use

• Fault due to wear and tear

Any modification of the product effected by the user or a third party

SOUNDSATION shall satisfy the warranty obligations by remedying any material or
manufacturing faults free of charge at SOUNDSATION’s discretion either by repair or
by exchanging individual parts or the entire appliance. Any defective parts removed
from a product during the course of a warranty claim shall become the property of
SOUNDSATION

While under warranty period, defective products may be returned to your local
SOUNDSATION dealer together with original proof of purchase. To avoid any
damages in transit, please use the original packaging if available. Alternatively you can
send the product to SOUNDSATION SERV IC E C ENTE R – Via En zo Ferrari, 10 –
62017 Porto Recanati - Italy . In order to send a product to service center you need an
RMA number. Shipping charges have to be covered by the owner of the product.

For further information, please visit www.soundsationmusic

GENERAL WA R N I N G S

To prevent possible damages, read the following list of actions:

- Do not place the product in wet or dirty environments.

- Do not remove the protective coverings.

- Do not cover any of the product ventilation holes.

- Air must circulate freely around the product.

- Do not set the product on a surface with excessive vibration.

- Do not expose the product to high electro-magnetic interference.

- Do not expose the product to heat, cold, wet in improper way in respect

to its IP grade

- Do not leave the product in direct sunlight.

- Do not expose the product to electrostatic forces.

- Do not place items with flames, such as candles or lighters, on the

product.

- Do not place the product on anything containing water or other fluids.

If any foreign objects enter the instrument, please contact your dealer or an authorized
SOUNDSATION center.

The serial number, electrical features and international standards are printed on a
label located in the bottom of the instrument.

In case of problems remember to give the serial number to the responsible of the
technical assistance.

TECHNICAL REFERENCE:

Vo l t a g e ：AC110V-240V
Frequency：50/60HZ
Rated Power capacity: 200W
LED power：10 W
LED QTN：6pcs (4 in 1)
Control mode：DMX512/Auto/manual/sound active
Channel：18CH or 12CH (switchable)
Protection grade: IP20
Net weight: 6.5KG
machine size: 959×101.3×161MM

1. OPERATION PANEL DIAGRAM

MENU UP DOWN ENTER

2. MENU INSTRUCTION:

Operate

Display

Specification

Press

MENU

︱

Press UP

or DOWN

DMX18CH

Add: xxx

Press UP or DOWN to choose address 1-512 under
21 CH mode, then press ENTER to save

DMX12CH

Add: xxx

Press UP or DOWN to choose address 1-512 under
12 CH mode, then press ENTER to save

Manual

Press ENTER to enter manual mode for Y axis, press
ENTER again then press UP or DOWN to adjust
value 0-255, then press ENTER to save

Dimmer

Press ENTER to enter manual mode for RGB,
choose R,G,B,W, then press ENTER again to enter

manual mode, use UP or DOWN to adjust brightness
0-255, then press ENTER to save

4. MASTER AND SLAVE CONTROL

Master and slave: select one machine as master, press the menu to choose the function
you want(sound or AUTO MODE). Set other machine to same or different DMX
address. connect machines one by one by DMX cable. The slave machines will run
the same as master machine.
Controller to machines: all machines are set to same DMX address, or different DMX
address, using DMX cable to connect machines& controller, all machines will be
controlled by controller. (note: making sure machines are set to either 12CHS or
18CHS. Considering the compatibility among the machines and controllers)

5. REMINDER:

1. Only working in environment of 0~40℃ without corrosive steam or gas, and

without flammable, explosive objectives.

2. It will generate heat, so the flammable, explosive objective should be away from

fixture Min 0.5m, and away from the lamp Min 2m if it is lighting.

3. No more than 8 fixtures connected by Daisy chain connection.

4. One signal cable only can control maximun 30pcs beam lights,if you want to control

more than 20pcs devices ,pls use signal amplifier. for the last machine, a DMX

signal output or input is vacant. This vacant output or input should be connected
a terminal organ. Find a DMX output or input connector, inside the connector,
weld a120ohm, 1/4 w resistance between pin2 and pin3, then inset this connector
to the vacant output or input.

5. The glass on the fixture is optical lens. There should be taken care and no any

shock or crash. If damaged, ask qualified personals for repair.

6. Making sure the fixture is well grounding when operation, any damaged wire,

cable please contact us/ our agent or qualified personals for help. It is type Y
attachment connection.

6. WARNING:

1. Please use security rope on the assistant hanging set while working , and the

bearing weight of the hook and security rope must more than 3 times of the light
weight

2. some heat may occur during operation.

3. stop running it if any object damaged.

64-70 Auto not with Y axis mode①，71-77 Auto not with Y
axis mode②，78-84 Auto not with Y axis mode③，85-91
Auto not with Y axis mode④，92-98 Auto not with Y axis
mode⑤，99-105 Auto not with Y axis mode⑥，106-112
Auto not with Y axis mode⑦，113-119 Auto not with Y axis
mode⑧，120-126 Auto not with Y axis mode⑨

127-133 sound with Y axis mode①，134-140 sound with Y
axis mode②，141-147 sound with Y axis mode③，148-154
sound with Y axis mode④，155-161 sound with Y axis mode
⑤，162-168 sound with Y axis mode⑥，169-175 sound with
Y axis mode⑦，176-182 sound with Y axis mode⑧，183-

189 sound with Y axis mode⑨

190-196 sound not with Y axis mode①，197-203 sound not
with Y axis mode②，204-210 sound not with Y axis mode
③，211-217 sound not with Y axis mode④，218-224 sound
not with Y axis mode⑤，225-231 sound not with Y axis mode
⑥，232-238 sound not with Y axis mode⑦，239-245 sound
not with Y axis mode⑧，246-255 sound not with Y axis mode
⑨

CH10

Auto speed

adjust

0-255 Slow to fast

CH11

Y axis speed

adjust

0-255 Fast to slow

CH12

LED1

Brightness adjusting for RGBW，2-31 red，32-61green，62-
91 blue，92-121white，122-151 red and green mixture，152-
181 red and blue mixture ，182-211 green and blue mixture，
212-241 red, green and blue mixture，242-255RGBW Mixture

CH13

LED2

CH14

LED3

CH15

LED4

CH16

LED5

CH17

LED6

CH18

LED7

Press

MENU

︱

Press UP

or

DOWN

1-9LED

Press ENTER to enter choosing mode for LEDs, press
UP or DOWN to choose 1-9 single LED, press ENTER
to enter manual mode, use UP or DOWEN to adjust the
brightness of the 1-9 single LED, 0-255, then press
ENTER to save

Strobe

Press ENTER to enter manual mode for strobe, press
ENTER again to enter manual adjusting mode, use UP
or DOWN to adjust the strobe value 0-255, then press
ENTER to save

Tes t

︱

Press

ENTER

Off

Press ENTER to shut auto or sound

Mauto

Press ENTER, choosing 1-9 auto with Y axis program
by UP or DOWN, then press ENTER to save

Auto

Press ENTER, choosing 1-9 auto not with Y axis
program by UP or DOWN, then press ENTER to save

Msound

Press ENTER, choosing 1-9 sound with Y axis program
by UP or DOWN, then press ENTER to save

Sound

Press ENTER, choosing 1-9 sound not with Y axis
program by UP or DOWN, then press ENTER to save

RESET

|

ENTER

YES Press ENTER to Reset state

ON Do not enter Reset state

PA SS WO RD

↓

ENTER

↓

UP or down

PA SS WO RD -

UNLOCK

Press ENTER，use UP or down
to choose units digit，tens digit
and percentile as password
（original password is 988）
Press ENTER to unlock the
machine

PA SS WO RD -

LOCK

Press ENTER，use UP or down
to choose units digit，tens digit
and percentile as password
（original password is 988）
Press ENTER ,machine was
locked，when power off, the
machine will not work, you
should enter password again.

Remark: Press MENU back to set next menu. Press Enter to save for any changes.
Otherwise it will not saved after powered off. If not necessary, please od not lock
up the machine. If need to unlock, you should enter into menu（UNLOCK)，press
password, then the machine can be unlocked. Or when power off, the machine
will not work. If need to lock up again, then enter in to menu (LOCK）press
password then press ENTER.

3. DMX CHANNEL CHART

12 CH mode:

Operate

Display

specification

CH1

Y axis

0-255

CH2

Y axis 16 bit

0-255

CH3

Dimmer for all

0-255 From dark to bright

CH4

R

0-255 From dark to bright

CH5

G

0-255 From dark to bright

CH6

B

0-255 From dark to bright

CH7

W

0-255 From dark to bright

CH8

STROBE

0-255 slow to fast

CH9

AUTO/SOUND

1-7Auto with Y axis mode①，8-14 Auto with Y axis mode
②，15-21 Auto with Y axis mode③，22-28 Auto with Y axis
mode④，29-35 Auto with Y axis mode⑤，36-42 Auto with
Y axis mode⑥，43-49 Auto with Y axis mode⑦，50-56 Auto
with Y axis mode⑧，57-63 Auto with Y axis mode⑨

64-70 Auto not with Y axis mode①，71-77 Auto not with
Y axis mode②，78-84 Auto not with Y axis mode③，85-
91 Auto not with Y axis mode④，92-98 Auto not with Y
axis mode⑤，99-105 Auto not with Y axis mode⑥，106-
112 Auto not with Y axis mode⑦，113-119 Auto not with
Y axis mode⑧，120-126 Auto not with Y axis mode⑨

127-133 sound with Y axis mode①，134-140 sound with
Y axis mode②，141-147 sound with Y axis mode③，148-
154 sound with Y axis mode④，155-161 sound with Y axis

mode⑤，162-168 sound with Y axis mode⑥，169-175
sound with Y axis mode⑦，176-182 sound with Y axis
mode⑧，183-189 sound with Y axis mode⑨

190-196 sound not with Y axis mode①，197-203 sound
not with Y axis mode②，204-210 sound not with Y axis
mode③，211-217 sound not with Y axis mode④，218-
224 sound not with Y axis mode⑤，225-231 sound not
with Y axis mode⑥，232-238 sound not with Y axis mode
⑦，239-245 sound not with Y axis mode⑧，246-255
sound not with Y axis mode⑨

CH10

Auto speed

adjust

0-255 Slow to fast

CH11

Y axis speed

adjust

0-255 Fast to slow

CH12

Reset

0-254 no use，255 reset

18CH MODE:

Operate

Display

specification

CH1

Y axis

0-255

CH2

Y axis 16 bit

0-255

CH3

Dimmer for all

0-255 From dark to bright

CH4 R 0-255 From dark to bright

CH5 G 0-255 From dark to bright

CH6 B 0-255 From dark to bright

CH7 W 0-255 From dark to bright

CH8

STROBE

0-255 slow to fast

CH9

AUTO/SOUND

1-7Auto with Y axis mode①，8-14 Auto with Y axis mode
②，15-21 Auto with Y axis mode③，22-28 Auto with Y
axis mode④，29-35 Auto with Y axis mode⑤，36-42 Auto
with Y axis mode⑥，43-49 Auto with Y axis mode⑦，
50-56 Auto with Y axis mode⑧，57-63 Auto with Y axis
mode⑨