SOUNDPEATS Q30 HD User Manual

MANUFACTURER

Shenzhen SoundSOUL Information Technology Company Limited

Room 1308-1309, Building B, Huihai Square, Chuangye Road,

Longhua District, Shenzhen, China. 518109

[e-mail]

www.soundpeatsaudio.com

208-170139

FCC ID：2AFTUQ30 Model: Q30 HD Made in China

Q30 HD

USER MANUAL | Manuel d'Utilisation | Bedienungsanleitung |

Manual de Instrucciones | Manuale di istruzioni

| 取扱説明書|说明书

Introduction

Thank you for choosing SOUNDPEATS Q30 HD Wireless headphones. Please
read the manual carefully, and keep it for further reference. If you need any
assistance, please contact our customer support team by emailing
[e-mail]

Package Content

English

Product Diagram

English

Specifications

Bluetooth Profile

Bluetooth Chipset

Audio Codec

Play Time

Charging Time

Maximum Working Range

Earbud Dimension (L * W * H)

Earbud Weight

USB Charging Port

Volume+/Next Track

Multifunctional Button

LED Indicator/Microphone

Volume-/Previous Track

BT5.0、HSP、HFP、A2DP、AVRCP

Qualcomm® Qcc 3034
SBC、Qualcomm

Up to 13 hours（Varies by volume level and audio）

About 1.5 hours

10m

626 x 21.5 x 29.5 mm

16.1g

®

aptX™ HD

2

Button Control

Power On

Power Off

Play / Pause

Volume +/-

Play Next/Previous

Answer Phone Call

Hang Up

Reject Phone Call

Switch Phone Calls

Activate Voice Assistant

Factory Reset

Press and hold the Multifunctional Button for 3s until the led

light flashes blue

Press and hold the Multifunctional Button for 3s until the led

light flashes red

Short press the Multifunctional button

Short press the +/-button

Long press the +/- button for 2 seconds

Short press the multifunctional Button

Short press the Multifunctional Button in an active call

Press the Multifunctional button for 1.5s

Double Tap the MFB during a call

Double press the Multifunctional button while in playing or

pausing mode

Press the Multifunction button for 3s when the headset is

charging

31 7 8

English

LED Indicators

English

Status Earbuds LED Indicator

Charging

Fully charged

Low battery

Reset

LED indicator is solid red

LED indicator is solid blue

LED indicator flashes red once every 6 seconds

LED indicator flashes blue twice quickly

Wearing

1. Identify the right and left earpieces.

2. Insert the earbuds into your ears. Adjust the ear fins
direction and put them into your ears.

3. Adjust each earpiece until it fits flush in your ear and the
ear tip seals in the ear canal.

4

Get Started

Pairing

1.Power on the headset, press and hold the Multifunctional button for approximate­ly 3 seconds until the LED indicator flashes blue quickly(you will hear the voice
prompt “power on” first, just keep holding the multifunctional button ). Now the
headset is in pairing mode.

2.Activate the Bluetooth on your device and search for the nearby Bluetooth
connection:
For iPhone/iPad/iPod®: Settings -> Bluetooth -> On
For Android™: Setting ->Wireless & Networks -> Bluetooth -> On -> Scan for devices
For Windows® Phone devices: Settings -> Bluetooth -> On

3.“SOUNDPEATS Q30 HD” should be listed in the search result. Select the name to
connect. Once connected, the indicator will be solid blue. You will hear a voice
prompt“Your headset is connected”.

Notes:

1. When you want to unpair the headset with the device, just press the volume
buttons + and - simultaneously for about 3s.

2. The Q30 HD headset will stay in pairing mode for 3 minutes at most if no pairing
device is found. Afterwards, it will power off automatically.

5

English

Charging

1. Connect the charging port with any USB charging adapter or charging port

English

available. Charging starts automatically with LED indicator turning red and the
headset turns off.

2. The headset is fully charged when the LED indicator turns blue.

Notes:
When charging with a USB adapter, the charging current should not be greater
than 1A. Please do no use quick charger to charge the headphones.

Care and Maintenance

Keep the headset away from heat and humidity.
Do not put the product under direct sunlight or hot areas. High temperatures will
shorten lifespan of the headset, battery and / or the internal circuit board.
Power off the headset when not in use and before storing.
Do not try to take the product apart.
Do not drop or knock your headset on hard surfaces.
Do not use chemicals or detergents to clean the product.
Do not scrape the surface with sharp objects.

6

Warranty

We warrant this device 12 MONTHS from date of the original purchase for manufacturer
defects.

[e-mail]

www.soundpeatsaudio.com

Please scan the QR code or search the link below for detailed PDF manual.

https://soundpeatsaudio.com/downloads/

English

Qualcomm

English

Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm
Technologies, Inc. and/or its subsidiaries.
Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered
in the United States and other countries.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifcations not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.