Soundmax SM-LED40M03 User Manual [ru]

LED TV Телевизор цветного изображения

c жидкокристаллическим экраном

SM-LED40

Instruction manual

Руководство по эксплуатации

M03

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Utilization of the product Important safeguards Installation

Base installation Wall mounting

Connection

Outdoor antenna connection Other connections

Operation

Control elements

Front panel

Back panel Remote controller

Changing the battery

General operations

Signal sources

Teletext operations OSD operation

Channel setting Picture setting Sound setting Timer setting

Option setting Lock setting Electronic programme guide Digital programme recording Time Shift function CI information USB operation

Background information

Operations of file playback

General information

Troubleshooting

Causes of interference Accessories Specifications

2 3 3 3 4 4 4 5 5 5 6 6 6 6 7 7 8 8 8 9

9 10 10 11 11 11 12 12 12 12 13 13 14 15 15 15 16 16

Before you start

Utilization of the product

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Before you start

Important safeguards

• Please unplug the power cord from the AC outlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.

• This unit can be connected to a power supply outlet without the third ground contact as well as with a ground contact.

• Always disconnect the power cord and antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.

• When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, twist, pull or roast the power cord.

• Please contact the service center immediately if you found that the core is showed in the air or has been broken.

• Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.

• All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.

• Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.

• Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

• Over-press the panel may destroy the product.

• Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.

• Please place the product on a flat surface in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.

• Do not place any vase, potted plant, cup, medicine and any container with water on this

Before you start

product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

• Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.

• Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.

• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left, and right of the TV.

• Please place all the signal cords behind of rear panel.

• Do not overexert or touch the panel when you convey the product. Do not transfer the LED TV up or down display direction.

• Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, damaged power cord, connection cable or connection terminal may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.

• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic

drawings and may differ from real objects.

Installation

Base installation

Cover a flat stable surface with a soft cloth. Place the TV unit facedown on the cloth. Insert the base supports into the lower back panel of the unit and fasten with 4 screws 4*15BBH.

Wall mounting

• For wall mounting the back panel of this

unit is equipped with 4 screw holes (spread distance 200x200mm). A VESA wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately). Manufacturer is not responsible for improper mounting resulting in damage of the unit.

WARNING

In order to avoid damage, make sure to secure the unit on the wall according to the wall mounting instruction.

Wall or ceiling mounting implements must be durable and sufficient enough to support the weight of the unit.

Connection

Before you start

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in antenna input terminal on the rear of the cabinet.

Other connections

• Connect the video source to the

miniAV input using the special cable.

Component input YPbPr is

• intended to receive component video signal from the external device. Connection is made with the help of a special component cable.

• Plug the power cable in the electric outlet, making sure the current voltage is supported.

• When using the LED as a computer screen, connect the PC to the VGA jack from

TVRF antenna jack

the monitor by the relevant cable (not included).

• If the video source has a HDMI output jack, you can connect the signal to the monitor by the HDMI cable (not included).

• Coaxial output is intended for transmitting multi-channel sound to an external decoder (e.g. in 5.1-CH format). Coaxial cable should be used for connection.

• PCMCIA slot is used for CI modules that are obtained from your digital TV provider.

• Connect your headphones or earphones (not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.

Operation

Control elements

Front panel

1. POWER button

2. SOURCE button

3. MENU button

4. VOL- button

5. VOL+ button

6. CH- button

7. CH+ button

IR sensor

9. LED indicator

Back panel

1. Headphones socket

2. USB port

3. CI+ slot

4. YPbPr (Mini) input

5. AV (Mini) input

6. Coaxial output

7. HDMI inputs

TVRF antenna input

9. SCART input

10. PC audio input

11. PC video input (VGA)

VGA PC AUDIO SCART RF HDMI1

1011

Headphone

5V 0.5A

HDMI2 HDMI3 COAXIAL AV YPbPr CI+ USB

Remote controller (RC)

Operation

1. POWER: Turn on the TV/Standby.

Operation

2. AUDIO: Switch the audio channel when DVD or multimedia playing. I/II: In the TV condition, press this button to select the stereo mode.

3. MUTE: Mute or restore the sound.

4. NUMBER KEYS: Change the channel directly.

5. SLEEP: Auto Power Off Timer.

6. REPEAT: Repeat mode.

7. EXIT: Exit the Menu.

8. MENU: Show Menu.

9. SOURCE: Press to change signal source.

REPEAT

PVR LIST

REC TEXT

GOTO

10. INFO: Show information about the current program.

11. NAVIGATION KEYS (Up, Down, Left, Right and OK): To

12. VOL: Increase and decrease volume.

13. CH: Next and Previous channel.

14. S. MODE: Setting audio options.

15. P. MODE: Output image mode selection.

16. P.SIZE: Press to select the different picture size.

17. GUIDE: Show the Electronic Program Guide.

18. DTV/RADIO: In DTV mode, press DTV/RADIO button to enter DTV or

19. PVR LIST: In DTV mode, displays the executed PVR LIST.

20. FAV: Show the list of favourite channels.

21. SUBTITLE: Select subtitle of media video ﬁle. (needs the support of

22. STOP/ : Stop playback.

23.

SOUNDM

24. REC/ : In DTV mode, press REC button to start recording, press

25. TEXT: Turns on and off the Teletext function.

26. : Next ﬁle or chapter.

27. : Previous ﬁle or chapter.

28. : Fast rewind playback.

29. : Fast forward playback.

: Return to the previous channel tuned.

move in the menus and conﬁrm settings.

Reveals hidden information such as the answers to a quiz in TELETEXT mode.

Displays the main index in Teletext mode.

Displays the top, buttom or all of page.

Freeze a multi-page changing on Teletext mode.

RADIO mode.

disk or ﬂie)

TS: In DTV mode, press TS button to start the delay function, press PLAY/PAUSE to delay program, press the STOP button to terminate the delay functions.

: Play/Pause.

again to stop recording.

GOTO: Play from the desired location.

Press the appropriate colour to direct access functions in TELETEXT or EPG OSD mode.

Operation

on the back of the RC.

compartment making sure that the correct polarity is observed.

should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

used for a long time.

different types of batteries. Weak batteries can leak and severely damage the RC.

and do not place it in an area with high humidity.

Operation

Changing the battery

1. Remove the battery compartment cover

2. Insert the batteries into the battery

3. Install the cover back.

1 2 3

• Use two AAA batteries for the RC. The RC

• Take the battery out of the RC if it is not

• Do not mix new and used batteries or

• Do not expose the RC to shock, liquids,

General operations

• Select the TV function mode. Press CH-/CH+ buttons to select previous or next channels; or press number buttons to enter a channel number directly.

• Press INFO button to display the preset TV channel play information.

Press AUDIO button in TV mode repeatedly to

• switch between various Nicam sound modes (can be unavailable for some channels). This function is optional.

Signal sources

Press button, then press DOWN/UP cursor buttons on the RC or CH+/CHbuttons on the panel to select a source from available source list: DTV => ATV => AV => PC => SCART => COMPONENT => HDMI 1 => HDMI 2 => HDMI 3 => MEDIA. Press OK button on the RC to confirm.

Power

•

Connect the plug of the power cord to the mains socket.

• Do not leave your TV in standby mode for a long period of time; if you are not going to use the unit, disconnect it from power supply.

• In TV mode the unit will automatically go to standby mode if no signal for 5 minutes.

Operations

• Press VOL- button repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume.

•

Press

again or increase volume to resume sound.

• Press REPEAT button on the RC to select from the present channel and the previously displayed channel.

to mute sound, press this button

MUTE

Operation

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the RC or VOL+/VOL- buttons on the panel to go to the needed setting page.

3. Press UP/DOWN cursor buttons on the RC or CH+/CH- buttons on the panel to select a parameter to adjust.

4. Press LEFT/RIGHT buttons on the RC or VOL+/VOL- buttons on the panel to adjust the selected parameter.

5. Press MENU button to return to the root menu or exit menu setting.

Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Channel setting

CHANNEL

Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Schedule List Signal Information

CI Information

Select Press “OK” to select Press “MENU” to return

• Auto Tuning: press OK buttons to select the country and tune type for channels to start automatic search and saving of available ATV channels. After the search is finished, the unit will skip to searching DTV channels, Radio channels and Data. During the ATV search, press MENU button to skip to DTV, Radio and Data search.

• DTV Manual Tuning: Press LEFT/RIGHT

cursor buttons to select channel number. Press OK button to start searching. When the nearest available channel is found, the search will stop and the channel will be saved under the selected number. Press MENU button to quit.

• ATV Manual Tuning:

Current CH: select channel number. Color System: select corresponding color system. Sound System: select corresponding sound system.

Fine-Tune: perform fine adjustment of the current frequency. Search: press LEFT/RIGHT buttons; the

unit will search for next available channel downward or upward and save it under the current number.

• Programme Edit: this item allows

you to sort TV programs according to your preferences. Enter the program edit menu:

Delete: Select the channel you want to delete.

Press red button to delete the channel.

Move (not available for DTV channels with LCN): Highlight the needed channel. Press yellow button; select the position to put the channel into. Press yellow button to confirm.

Favorite: Select the channel you want to edit. If this channel is your favorite channel, you can add it to your favorite channel list by pressing the FAV button.

Skip: Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.

• Signal Information: View the information

on the current signal.

• CI Information (only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a CI card into the PCMCIA slot according to the arrow on the CI card.

• The function can only be gotten when

CI slot is available.

• It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.

• Please do not insert or pull out the CI card when power on. During initialization of the CI

Operation

card, please don’t operate the TV.

• Do not insert or pull out the CI card frequently so as to avoid any damages of the TV and the CI card.

Picture setting

PICTURE

Picture Mode

Contrast

Brightness

Colour

Tint

Sharpness

Color Temperature Noise Reduction

HDMI Mode

Select Press “OK” to select Press “MENU” to return

• Picture Mode: Dynamic/Standard/Mild/ Personal. When Personal mode is selected, you can adjust contrast, brightness, colour, sharpness and tint (in NTSC) of the image.

• Color Temperature: Standard/Warm/ Cool.

• Noise Reduction: Dynamic noise reduction effect for reducing the video noise level. Select the Off/Low/Middle/High/Default mode.

Sound setting

SOUND

Sound Mode

Treble

Bass

Balance

Auto Volume SPDIF Mode

AD Switch

Select Press “OK” to select Press “MENU” to return

• Sound mode: Standard/Music/Movie/

Sports/Personal. When Personal mode is selected, you can adjust bass and treble.

•

Balance: adjust the balance between the

left and the right speaker.

• Auto Volume: automatic volume adjustment.

• SPDIF Mode: Select the digital audio

output mode: Auto/PCM/Off.

Operation

Timer setting

TIME

Clock

Time Zone

Sleep Timer

Auto Standby

OSD Timer

Summer Time

Select Press “OK” to select Press “MENU” to return

• Clock: You can display either the DTV signal stream time or set the system time. volume for the TV to switch on. The TV must be in standby for the On-timer to work.

• Sleep Timer: select the period until automatic switch-off of the unit.

• Time Zone: select your time zone.

• OSD Timer: select the period of

visibility for the on-screen menu.

Option setting

OPTION

Language

TT Language Audio Languages Subtitle Language Hearing Impaired PVR File System Aspect Ratio Blue Screen First Time Installation Reset Software Update (USB)

Environment

HDMI CEC

Select Press “OK” to select Press “MENU” to return

• Language: select the language of

the on-screen display (OSD) menu.

• Audio Language: select audio language

(available for some DTV channels).

•

Subtitle Language: select subtitle language

(available for some DTV channels).

• Hearing Impaired: On/Off.

• PVR File System (in DTV mode):

Select Disc: select the storage used for PVR. Time Shift Size: select the time for Time

Shift.

Format: format the USB. Speed Check: display the speed of the

storage.

• Reset: restore TV settings

to their initial factory defaults.

• Environment: select between

the Home Mode/Shop Mode.

Lock setting

LOCK

System Lock

Set Password

Channel Lock

Parental Guidance

Key Lock

Hotel Mode

Select Press “OK” to select Press “MENU” to return

• System Lock: The feature can prevent unauthorized operation of the TV set unless entering a 4-digit password. When Lock System is on and the system is locked, you must input the system password at Auto

Operation

Tuning, Manual Tuning, Programme Edit or Default. Press the right number buttons for the password. The default password is 0000.

confirmed, please remember it for entering into the Parent Guide menu, all functions can not be activated until the correct password is entered.

password. Press the number buttons on the remote control to set the new password. When the new password has been put in twice, the setting is finished successfully. The TV will go back to previous menu.

Green button to lock the available program you want. Press Green button again to unlock it.

mode)

Programme Guide menu. This function gives you the detailed information of the channel, indicating the time of the program playing. From the Programme Guide it is possible to check the program information for the next eight days (If the information is available from the broadcaster). Press

parameters of recording, The unit is able to do schedule recording when TV is turning on or in standby mode. You can set up several schedule recording. Different schedules should not overlap. When recording starts in standby mode, the front indicators will change color and there will be no picture or sound from the unit.

the screen.

the detailed information of the current channel.

Operation

After a password correction has been

• Set password: You can set your private

• Channel lock (in TV/DTV mode): Press

Electronic Programme Guide (in DTV

Press GUIDE button to display the

EXIT button to quit.

• Record: Press Red button to set the

You can press the POWER button to light up

• Info: Press the INFO button to see

• Remind: If you find the desired program

which will be shown in the future. Press the green button to book program.

Digital program recording

Insert a USB, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until STOP button is pressed or the memory is full. Press STOP to quit recording mode. Press PVR LIST to show the list of recorded files, you can select the file you want to play and view the information about it, play it (OK).

Please note the following about PVR:

• USB storage device must have the

capacity of at least 512 MB and support the USB 2.0 standard. Some non-standard storage devices may not be supported

• Try formatting the i

when you have trouble recording.

• Do not disconnect the device while the

formatting is in progress. When you format the device, all data on it is deleted. It may be advisable to back up your files before formatting.

• If the USB storage device has several

partitions, the PVR system can record the data on any one of them.

delete it (Red button) or

nserted storage device

Time Shift function

Time shift is a feature enabling you to record an air program while you are away. Press TS button to activate Time Shift while recording. Press TS again to resume the program. Press EXIT to quit the TIme Shift mode.

CI Information

(only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a CI card into the PCMCIA slot according to the arrow on the CI card.

• The function can only be available

when CI card is present.

• It is possible for you to change CI

+ 30 hidden pages