Soundkitz AE-F Instruction Manual

Dear Soundkitz Customer,

We’d like to thank you for purchasing our product. We are proud to know that
our equipment will be assisting you in your future recordings. The quality of our
equipment and your satisfaction is our top priority. If you have any questions or
need additional assistance with setting up your AE-F please feel free to contact
us at [e-mail].

We look forward to assisting your musical needs in the future as we develop
further products to perfect the art of recording.

Enjoy your new Soundkitz Audio Equipment!

Sincerely,

- SK ACOUSTICS, LLC.-

Handling Your Filter:

-Never hold or grasp your AE-F by the acoustic foam. When handling your AE-F always use the units
mounting bracket or protected side ends when making adjustments or basic handling of the unit.

-Do not place heavy objects or equipment on top of your AE-F as this will result in damage to the frame of
your filter.

-Always be sure to check and ensure that your microphone stand is level or weighted down properly to
ensure that your microphone stand will not topple when mounting additional equipment or accessories.

How To Adjust Your Unit:

-The AE-F features a shock absorbing mounting system. If a force is applied to the unit such as from being
“bumped”, the unit will absorb the force and wobble back into original state. This system can allow for your
mount to be bent and flexed as necessary. If you’re recording on uneven ground or find your AE-F off center
you can adjust the position of the unit by holding the side ends of the AE-F and gently flexing the mount into
the desired level position. It is recommended that the AE-F be installed first before adjusting and leveling the
position of the unit.

Taking Care of Your Filter:

-Your AE-F is treated with a rubberized coating to protect your unit from general wear and tear. This coating
can best be cleaned by lightly applying a damp cloth over the rear surface of the unit.

-Your AE-F is designed to allow sound to pass from the front through the rear of the unit. This means that air
is traveling through these passages and overtime dust may accumulate. To prevent internal contamination
to your filter it is sealed on all sides. However, general maintenance of cleaning the rear grill and the
acoustic foam can keep your unit functioning to top standards. A vacuum cleaner hose can be used to clean
the front and rear of the unit as well as products like “keyboard air cleaner” that can blast away dust and
debris.

-When storing your AE-F when not in use, it is best to keep unit in a cool dry place. It is suggested that a
cover or bag be placed over the unit to keep contamination from dust and debris from entering the filter
ports.

Warranty Information:

All Soundkitz items are covered for the period of 1-Year from the date of purchase under general repair or
replacement upon inspection of the unit. Original proof of purchase is required for all warranty services
(shipping fees may apply).

For all warranty services and info please contact us at:

[e-mail] by visiting our or website at www.Soundkitz.com

GENERAL INFORMATION

INSTALLATION INSTRUCTIONS

NOTE: Before mounting your AE-F please be sure your stand is securely placed on a flat level surface or

weighted down to avoid topple over. It is ideal to test fit your microphone mount to ensure you have
adequate clearance to install your microphone. Please be sure to check that your mount/microphone is not

touching the surface of your filter’s acoustic foam. This contact may result in damage to the acoustic foam

on your unit.

1. Before mounting the AE-F to your microphone stand please remove the microphone mount (if installed),

and lower the “Stop Ring” which should be located on the top of your microphone stand to the lowest

available thread.