SoundFreaq SFQ-10 User Manual

156mm x 100mm

Welcome to Soundfreaq.

We are a co-op of craftsmen— designers and engineers— with a
passion for great sound. We develop our products from the ground up
to offer premium sound quality and wireless versatility.

Thank you for choosing Pocket Kick. We sincerely hope that you enjoy
your new speaker. Please share your experience with us:

[e-mail]

Happy Listening to you.

We invite you to join our Soundfreaq community:

FACEBOOK TWITTER

facebook.com/soundfreaq twitter.com/soundfreaq

soundfreaq.com

Playback via Bluetooth

Power switch

Pair indicator

(Pair)
button

Play controls

1. Slide up the Power switch to turn on Pocket Kick.

2. Press the (Pair) button on Pocket Kick to enter pairing
mode – the Pair indicator light will flash rapidly.

3. Open the Bluetooth settings on your Bluetooth-enabled
device. Once Pocket Kick is recognized “Pocket Kick”
will appear in the list of Bluetooth devices. Select
“Pocket Kick” to pair with your device. The Pair
indicator light will turn solid once Pocket Kick is
successfully connected.

4. You can use the Play controls on Pocket Kick to control
playback.

Notes:

• On most devices, no password is needed to pair, however,

if a password is requested the default password is
“1234”.

• You can change the volume by either using the volume

buttons on Pocket Kick or changing the volume on your

paired device. For max volume, turn both volumes to

maximum.

Charging the Built-in Battery Using Hands-free Calling

Battery indicator

USB power port

Pocket Kick has a built in rechargeable battery. To charge, plug
into a powered USB port such as a computer, phone or tablet

charger. It is suggested to use the micro USB cable included in
the package for charging your device. The battery indicator
combined with Power switch will indicate the charging status.

Mode

Standby Blinking Green (Slowly)
Power on (not connected)

Bluetooth or Aux in mode

Note: For charging or charging while playing Pocket Kick,
please use minimum 1A USB power adaptor. Please fully
charge Pocket Kick before using.

Charging Fully Charged

Blinks Green
Solid Green

Blinking White (Slowly)
Blinks White

Solid White

Playback via AUX IN

Connect any device with a headphone jack by
plugging the 3.5mm cable (included) into the
AUX IN jack. When the AUX I N jack is

inserted, the system will only play via AUX IN.
Note: In order to save the energy, please

unplug the line in cable from the Aux Line In
of Pocket Kick when do not use.

AUX IN jack

1. Slide up the Power switch to turn on Pocket Kick.

2. Establish the Bluetooth connection between the system
and your mobile phone.

To answer a call

When a call arrives, the music playback is muted and a ring

tone is heard from the system. Press Call button and speak
using the microphone.

To end a call

To end a call, press Call button. If you were listening to
music when the call arrived, it will be resumed when the call

has finished.

Notes:

• If a call arrives, press and hold Call button for about 2
seconds to reject it.

If no call arrives, press and hold Call button for about 2

•

seconds to redial the phone number that is dialed last time.

For further assistance with setting up Pocket Kick, we
are available at:

[e-mail]

soundfreaq.com/support

Pocket Kick

Microphone

Play/Pause
/Call button