Soul Electronics SE45 User Manual

MS01W (BES2000-U) True Wireless Stereo Earphone

User Manual & Specifications

---Version 20180412

Earphone Basic Specifications

■Size: single-earphone 23.6×16.3×23.7mm

■Weight: 4.4g（single-earphone）

■Charging port: magnetic type

■Keys: 1 (MFB button)

■Charge indicator: Green LED light (Charging) / light off (Charging completed)

■Battery :Lithium-ion Polymer rechargeable battery, 551215 , 55mAh

■Earphone Charging Current:55mA

■ Earphone Charging time: 1 hour

■Working Voltage: 3.3V~4.2V

■Standby time: about 40 hours

■ Battery and Power

■ Earphone with Charging case:

Music Time:6~7hours
Talking Time:8 hours

■ Earphone(single charge):
Music Time: 2~2.5 hours
Talking Time: 2 hours

※ Working time of main earphone in the state of two earphones:＜3 Hours

■ Bluetooth version: Bluetooth 4.2
1 / 6

■Bluetooth chipset: BES2000-U

■ Support Profile: HSP, HFP, A2DP, AVRCP

■ The remote control to speaker: MFB (Play/Pause/Stop; Next song/ Previous song)

■ Paring name: MS01W

■ Password: 0000

■ RF transmit: class 2

■RF input impedance: 50ohm

■RF Emissive Power: 9 dBm

■ Receive sensitivity: -89dBm

■ Transmission Range (Hz): 2.40GHz ~ 2.48GHz

■ Transmission distance: 10m

■ TWS function: after two headsets pair and connect, they can work as true wireless stereo

headset

■ Audio sampling accuracy: 16bits

■ Audio sampling rate: Up to 96 kHz

■ Audio encoding format: CVSD、mSBC、SBC、ACC

■SNR: >95dB

■ Working temperature: -15℃～+60℃

■ Working humidity: 10%~85%( in a non-frozen state)

Speaker

■Speaker specifications / mode: Φ6mm

■Impedance: 16Ω/ typ

■Frequency(Hz): 20Hz～20KHz

■Sensitivity: 93±3dB

■Output Power: 2 mW ( normal), 5mW ( maximum)

MIC

■ MIC type: silicon MIC

■ MIC sensitivity: -42±3dB

■ SPL：130dB

Basic Specifications of Charging Case

■Size: 59.65x34.66x27.4mm

■Weight:26.6g

■Charging Port: Micro USB

■Charging LED indicator/charging completed indicator: Blink blue/Blue LED lighting

■Charging base(Full) provide power to earphone: 2 times

2 / 6

■Battery: Lithium-ion Polymer rechargeable battery,300mAh

■Charging time : 2hrs

■ Input Voltage :DC5V

■Charging current:250mA

■Output Voltage:DC5V

■Discharge current:55mA

■ Working temperature: -15℃～+60℃

■ Working humidity: 10%~85%( in a non-frozen state)

Operating Instructions
Power ON

When the earphone is off, remove the earphones from the charging case, power on
automatically, The LED indicator will flash for one second in blue. Earphone with “Power on”
prompt tone.

Power Off

When the earphones is power on, put earphones into the charging case, earphones power
off automatically .

Pairing

1) Remove R & L earphone from the charging case at same time, after automatically turn

on,R & L connected automatically in 10 seconds,with “power on” “TWS connected” prompt
from each earphone, R & L connection is finished;

2) After the right connect to the left, Left with “pairing” prompt tone, the LED indicator

flashes green and blue;

3) On your device, go to Bluetooth menu, select for: MS01W, pair and connect. You will

hear “Connected” when pairing is complete.
Notes:
Music function ,R & L is synchronous;
Call function just apply to L earphone.

Pairing Left&Right earphone Guide:

1. Put both earphone back to the charging case. then Pick out the both earphone from the

charging capsule;

2. Make sure both of earphone didn't connected with any devices;

3. Double click the main button of left earphone you'll hear "Pairing" from the left earphone.

Then Hold the main button of left earphone for 3 seconds, You'll hear "TWS searching".
While the indicator light was flashing blue and green;

3 / 6